2008 Saturn Aura Steering and Chassis Parts
Find Your Specific 2008 Saturn Aura Steering and Chassis Parts
Below you will find various in-demand Saturn Steering and Chassis Parts, components and accessories for your 2008 Aura. Advance Auto Parts has popular Aura parts like Sway Bars, Tie Rods, Ball Joints and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Aura model years including
2007
2009 and more. Select a category of 2008 Saturn Aura Steering and Chassis Parts below and start saving instantly.
Popular 2008 Saturn Aura Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 2008 Saturn Auras
Edelmann – Factory New Rack and Pinion – Includes Inner Tie Rods (Part No.2021)
from
$622.99
Edelmann Elite power steering rack and pinions represent a step up in quality and performance over typical aftermarket brand power steering racks and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each rack is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every rack has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.
Product Features:
See More
Product Features:
- Every component is 100% completely new, never reused
- Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
- Re-engineered designs like internal vent tubing fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
- Complete with Inner Tie Rods & Boots
- Includes necessary hardware where applicable (o-ring, washers, etc…)
- Reinforced Packaging – Assures the product will arrive undamaged and ready for installation
- U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance
PWR – New Power Steering Pump with Reservoir (Part No.60-5606R)
from
$262.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Power Steering Pumps are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Supplied with a Pre-Installed Reservoir, Reservoir Cap, as well as the required Installation Seals, Washers, and Instructions
- Enables you to achieve a more efficient, durable, and professional installation
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
MOOG – Steering Tie Rod End (Part No.ES800086)
from
$50.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Rare Parts – Control Arm W/ Ball Joint (Part No.RP12546)
from
$229.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Powercraft – Heavy Duty Pump Seal Kit (Part No.8935)
from
$26.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Stabilizer Bar Link 644-83809 (Part No.644-83809)
from
$54.99
Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating on steel links to reduce rust and extend service life
- Hex formed studs for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
Carquest Premium – Power Steering 3/8 Cap Seal – .370 ID X .30 W Assembly (Part No.70018)
from
$30.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
See More
Carquest Premium – Multi-Use Connector (Part No.PTA2913)
from
$90.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Dorman – Intermediate Steering Shaft (Part No.425-168)
from
$183.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
Dorman – Suspension Stabilizer Bar (Part No.927-111)
from
$154.99
The symptoms of a failed suspension stabilizer bar assembly, also known as a sway bar, can include suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding. The causes for failure can range from worn bushings and links to collision impact. The sway bar and components in this assembly are designed to match the performance of the original equipment parts on specified vehicle makes, models and years. The assembly has been engineered and manufactured to strict quality control standards for a complete sway bar repair and reliable service life.
Product Features:
See More
Product Features:
- Direct replacement – the components in this suspension sway bar assembly are designed to match the performance of the factory assembly on specified vehicles to help ensure predictable vehicle handling
- Ideal solution – engineered to help ensure proper vehicle handling and eliminate suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding
- Durable construction – designed and manufactured to strict specifications for reliable performance, and to replace a sway bar that has failed due to collision or worn bushings or links
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Power Steering Pressure Hose Assembly, 3/8" Male Quick Connect x 16mm Male "O" Ring (Part No.40021)
from
$68.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Driveworks – Tie Rod End (Part No.DW-ES800086)
from
$38.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
Dorman – Steering Knuckle (Part No.698-235)
from
$479.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Alignment Toe Adjuster (Part No.K100255)
from
$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Driveworks – Camber Bolt Kit (Part No.DW-K90473)
from
$18.29
Camber Bolt Kit
Cardone – Remanufactured Electronic Power Steering Assist Column (Part No.1C-1004)
from
$453.99
CARDONE Remanufactured Electronic Power Steering Assist Columns are engineered to meet or exceed OEM performance. All units are calibrated and tested to ensure proper function and long-lasting performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Every unit is 100 percent computer tested to ensure O.E.M. performance.
- 100 percent replacement of all wear components to protect against contaminates.
- Each unit undergoes a proprietary factory test to verify all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Dorman – Power Steering Pump Pulley (Part No.300-139)
from
$53.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Power Steering Return Hose, 3/8" Male Quick Connect x 3/8" I.D. Hose (Part No.37859)
from
$117.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Cardone – Power Steering Filter (Part No.20-0012F)
from
$47.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Remanufactured Power Steering Assist Motor (Part No.1C-1002)
from
$613.99
CARDONE Remanufactured Power Steering Assist Motors are engineered to meet or exceed O.E. performance. Units are calibrated and tested to ensure proper function and long-lasting performance, providing you a quality product you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Every unit is 100 percent computer tested to ensure O.E.M. performance.
- 100 percent replacement of all wear components to protect against contaminates.
- Each unit undergoes a proprietary factory test to verify all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Rare Parts – Sway Bar Frame Bushing (Part No.RP19877)
from
$24.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
MOOG – Alignment Camber Kit (Part No.K100155)
from
$33.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K200307)
from
$14.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Rack Pinion Seal Kit (Part No.9170)
from
$91.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Alignment Shim (Part No.K100336)
from
$30.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Part can help bring vehicle back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- Loose or worn chassis parts can lead to premature tire wear
Rare Parts – CAM BOLT KIT (Part No.RP16745)
from
$48.99
CAM BOLT KIT
Upgrade your 2008 Saturn Aura with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 2008 Saturn Aura, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Saturn or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Aura functioning at its best. At Advance Auto Parts, we offer a wide selection of 85 Steering and Chassis Parts for the 2008 Saturn Aura, designed to meet your needs without breaking the bank.
From
Sway Bar
replacements to
Tie Rods
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2008 Saturn Aura at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $7.79 to $923.99, with
an average price of $129.05.
Our 85 Steering and Chassis Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 2008 Saturn Aura without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Saturn Aura, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Moog, DriveWorks, Dorman, and more.
Moog Steering and Chassis Parts
start at just $50.99 and boast an impressive 4.5 stars average rating from customers.
DriveWorks and Dorman also bring quality to the table, with Steering and Chassis Parts available starting at $18.29, and at an average 4.3 stars rating.
With 1,896 customer reviews and counting, our 2008 Saturn Aura Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2008 Saturn Aura is always ready to roll. We’re committed to providing you with everything you need to keep your Aura in top shape, all in one place.
Start shopping confidently below for your 2008 Saturn Aura!
Best-Selling Sway Bars for 2008 Saturn Auras
Enhance the driving experience in your Saturn with 14 quality Sway Bar components, starting at $7.79.
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K200306)
from
$7.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K200307)
from
$14.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Dorman – Sway Bar Bushing Bracket Kit (Part No.928-313)
from
$24.29
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – Sway Bar Frame Bushing (Part No.RP19888)
from
$34.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K80252)
from
$43.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
MOOG – Suspension Stabilizer Bar Link (Part No.K80252)
from
$58.99
Product Features:
See More
- EASY TO INSTALL – Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Sway Bar Link Kit (Part No.DW-K80851)
from
$23.79
Sway Bar Link Kit
MOOG – Suspension Stabilizer Bar Link (Part No.K80851)
from
$55.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Incorporates proven design and engineering features
Carquest Premium – Stabilizer Bar Link 644-83809 (Part No.644-83809)
from
$54.99
Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating on steel links to reduce rust and extend service life
- Hex formed studs for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K200320)
from
$16.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Carquest Premium – SWAY BAR LINK KIT (Part No.505-290899)
from
$24.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Rare Parts – Sway Bar Link (Part No.RP19058)
from
$129.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Frame Bushing (Part No.RP19877)
from
$24.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Frame Bushing (Part No.RP19876)
from
$23.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Most Popular 2008 Saturn Aura Tie Rods
Customize your Saturn with 8 Tie Rods products
like Tie Rod Ends and
Center Tie Rod Ends, all
priced under $139.99.
MOOG – Steering Tie Rod End (Part No.ES800086)
from
$50.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Steering Tie Rod End (Part No.EV80988)
from
$78.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Assembled in the USA
Driveworks – Tie Rod End (Part No.DW-ES800086)
from
$38.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
Driveworks – Tie Rod End (Part No.DW-EV80988)
from
$59.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Carquest Premium – Tie Rod End (Part No.310-83941)
from
$47.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Carquest Premium – Tie Rod End (Part No.300-83942)
from
$73.99
Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating to reduce rust and extend service life
- Hex formed studs and/or wrench flats for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Inner tie rod ends are supplied with thread locking compound
- Hardware included for easier installation (where applicable)
Rare Parts – Tie Rod End (Part No.RP28634)
from
$139.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP26677)
from
$99.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Top Picks for 2008 Saturn Aura Ball Joints
Upgrade Saturn Auras with top-quality Ball Joints parts, including 8 OEM and aftermarket selections for your 2008 model.
MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK620180)
from
$205.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG quality
- HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installation
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK620179)
from
$205.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG quality
- HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installation
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Carquest Premium – Suspension Control Arm (Part No.810-96727B)
from
$198.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Carquest Premium – Suspension Control Arm (Part No.810-96726B)
from
$198.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.520-163)
from
$257.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.520-164)
from
$198.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Control Arm W/ Ball Joint (Part No.RP12546)
from
$229.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Control Arm W/ Ball Joint (Part No.RP12547)
from
$229.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
In-Demand Steering Columns for 2008 Saturn Auras
Select from 1 premium Steering Columns parts for your 2008 Saturn Aura.
Cardone – Remanufactured Electronic Power Steering Assist Column (Part No.1C-1004)
from
$453.99
CARDONE Remanufactured Electronic Power Steering Assist Columns are engineered to meet or exceed OEM performance. All units are calibrated and tested to ensure proper function and long-lasting performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Every unit is 100 percent computer tested to ensure O.E.M. performance.
- 100 percent replacement of all wear components to protect against contaminates.
- Each unit undergoes a proprietary factory test to verify all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Most Sold 2008 Saturn Aura Power Steering Parts
Explore our best-selling Saturn parts for the 2008 Aura among 39 OEM and aftermarket options starting from $7.99.
Carquest Premium – Power Steering Pressure Hose Assembly, 9mm Male Captive "O" Ring x 16mm Male "O" Ring (Part No.37480)
from
$93.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Power Steering Filter (Part No.20-0058F)
from
$50.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Dorman – Power Steering Pump Pulley (Part No.300-139)
from
$53.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Cardone – Power Steering Filter (Part No.20-0012F)
from
$47.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Imperial – Mounting Kit System (Part No.226201)
from
$11.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-1035)
from
$292.99
CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
Product Features:
See More
Product Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100 percent performance testing to ensure perfect fit, function and reliable performance.
- 100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Cardone – Remanufactured Electronic Power Rack and Pinion Complete Unit (Part No.23-1810)
from
$248.99
A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Protective coating applied to each unit, where applicable, to extend the life of the unit
- 100% performance testing to ensure perfect fit, function and reliable performance
- 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
- 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
- Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
- Valve housings, where applicable, have polished micro-finish sleevings for durability
- Built to meet or exceed O.E.M. performance
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Cardone – New Power Steering Filter (Part No.20-0038F)
from
$32.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element.
- Patented built-in bypass that filters up to 190 micron particles.
- Designed to extend the life of the steering system.
- Sure-grip barb connections are included to ensure proper hose fitment.
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Cardone – Remanufactured Power Steering Pump (Part No.20-993)
from
$96.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100 percent tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Cardone – Remanufactured Power Steering Pump (Part No.21-5382)
from
$196.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100 percent tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-1810)
from
$272.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100 percent replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Power Steering Filter (Part No.20-P038F)
from
$35.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Carquest Premium – Power Steering Return Hose, 3/8" Male Quick Connect x 3/8" I.D. Hose (Part No.37859)
from
$117.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Carquest Premium – Power Steering 3/8 Cap Seal – .370 ID X .30 W Assembly (Part No.70018)
from
$30.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
See More
Cardone New – New Power Steering Pump (Part No.96-69993)
from
$184.99
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Product Features:
See More
Product Features:
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Meets or exceeds O.E. performance.
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$34.99
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Carquest Premium – Power Steering Pressure Hose Assembly, 3/8" Male Quick Connect x 16mm Male "O" Ring (Part No.40021)
from
$68.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Powercraft – Heavy Duty Pump Seal Kit (Part No.8935)
from
$26.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Power Steering Return Hose, 3/8" Male Quick Connect x 3/8" I.D. Hose (Part No.37596)
from
$125.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Zinc coated tubes protect against rust and corrosion
- Heat/abrasion tubing protects vital areas
Cardone – Remanufactured Power Steering Assist Motor (Part No.1C-1002)
from
$613.99
CARDONE Remanufactured Power Steering Assist Motors are engineered to meet or exceed O.E. performance. Units are calibrated and tested to ensure proper function and long-lasting performance, providing you a quality product you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Every unit is 100 percent computer tested to ensure O.E.M. performance.
- 100 percent replacement of all wear components to protect against contaminates.
- Each unit undergoes a proprietary factory test to verify all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Powercraft – Rack Pinion Seal Kit (Part No.9170)
from
$91.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Top-Rated Steering and Chassis Parts Brands For Your 2008 Saturn Aura
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2008 Saturn Auras. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, DriveWorks, and Dorman, and more. Steering and Chassis Parts from these brands that fit a 2008 Aura start at just $18.29 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Moog 2008 Saturn Aura Steering and Chassis Parts
When it comes to maintaining or upgrading your 2008 Saturn Aura, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2008 Saturn Aura. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $50.99, with an average price of just $111.99. Plus, with over 47 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$205.99
(14)
Front Right Lower Suspension Control Arm and Ball Joint Assembly
“Buy moog parts and never replace again. House brand junk does not last 2 years.”
Popular DriveWorks 2008 Saturn Aura Steering and Chassis Parts
DriveWorks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2008 Saturn Aura owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 2008 Aura, Advance Auto Parts carries a full inventory of 3 DriveWorks Steering and Chassis Parts. Plus you will be keeping your Saturn in peak condition while saving money because prices on these DriveWorks Steering and Chassis Parts range from $18.29 to $43.99, plus, with more than 91 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.
FAQs for 2008 Saturn Aura Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 2008 Saturn Auras?
Out of 85 Steering and Chassis Parts that fit 2008 Saturn Auras, the following parts are the top sellers:
- New Power Steering Filter (10417593) – $32.99
- SWAY BAR LINK KIT 1 EA DRIVE (10145509) – $43.99
- Tie Rod End (12096283) – $47.99
What’s the price range for 2008 Saturn Aura Steering and Chassis Parts?
Steering and Chassis Part prices for the 2008 Saturn Aura start at $7.79 and go up to $923.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 2008 Saturn Aura?
The average price for Steering and Chassis Parts for the 2008 Saturn Aura is $129.05. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Saturn Aura model years?
What are the cheapest Steering and Chassis Parts for my 2008 Saturn Aura?
The cheapest 2008 Saturn Aura Steering and Chassis Parts we carry in stock are:
- Suspension Stabilizer Bar Bushing Kit (10225659) – $7.79
- Power Steering Filter (50167394) – $7.99
- Mounting Kit System (6014844) – $11.99
- Pump Drive Shaft Seal Kit (18071199) – $13.49
- Suspension Stabilizer Bar Bushing Kit (10225435) – $14.99
What are the top-rated Steering and Chassis Parts that fit the 2008 Saturn Aura?
Out of 1,896 reviews by customers, our 2008 Saturn Aura Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2008 Saturn Aura and their top-rated products:
- Sway Bars
- Sway Bar Bushing Bracket Kit (10611398) – $24.29
- Suspension Stabilizer Bar Bushing Kit (10225659) – $7.79
- Sway Bar Frame Bushing (10654945) – $34.99
- Tie Rods
- Sway Bar Bushing Bracket Kit (10611398) – $24.29
- Suspension Stabilizer Bar Bushing Kit (10225659) – $7.79
- Sway Bar Frame Bushing (10654945) – $34.99
What types of Steering and Chassis Parts do you sell for my 2008 Saturn Aura?
As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2008 Saturn Aura:
Can I get help with 2008 Saturn Aura Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Saturn Steering and Chassis Parts and more.
What is your return policy for Saturn Aura Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Saturn Aura Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
