2008 Pontiac Grand Prix Air Intakes

Below you will find various in-demand Pontiac Air Intakes, components and accessories for your 2008 Grand Prix. Advance Auto Parts has popular Grand Prix parts like Throttle Body Parts, Throttle Bodies & Carb Parts, Airboxes and more. You’ll also find aftermarket and OEM Air Intakes for other Grand Prix model years including 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 and more. Select a category of 2008 Pontiac Grand Prix Air Intakes below and start saving instantly.

Popular 2008 Pontiac Grand Prix Air Intakes Categories

Intake Manifolds

Throttle Bodies

Engine Air Box Clips

Intake Manifold Gasket Sets

Air Intake Hoses

Engine Air Duct Clips

Throttle Body Mounting Gaskets

Throttle Position Sensor Connectors

Throttle Control Motor Connector

Essential Air Intakes for 2008 Pontiac Grand Prixes

from

$303.99

All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.

Product Features:

Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.
100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance.
Each unit is guaranteed to fit and function like the original.

from

$244.99

Original equipment throttle bodies often fail from moisture and oil intrusion and failed internal electronics. This Dorman OE FIX throttle body features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures.

Product Features:

Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience

from

$424.99

GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps provide air flow for proper fuel/air mixture
Allows for a quick throttle response
Assists in cold engine starts
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$8.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$6.29

GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent excess air form entering the intake
Helps seal the intake and throttle from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$10.49

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Each gasket is built to meet or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$32.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Utilizing high grade materials to ensure peak conductivity and perfect connections
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$20.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$94.99

This engine air intake hose was designed as a direct replacement for the original equipment intake hose. Engineered for a perfect fit and easy installation, it includes all necessary fittings. Made of quality materials for a long service life.

Product Features:

Direct replacement – fits and functions like original equipment
Quality construction – manufactured from premium materials for a long service life
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$487.99

Edelbrock part #21043 Performer intake manifold is designed for street 262-400 c.i.d. Chevy V8’s that have heads with canted center bolt holes, 1987-1995. This Manifold accepts late-model water neck, air-conditioning, alternator, H.E.I., has rear water cr

Product Features:

Idle-5500 RPM Range
Dual Plane Type-4150 Style Flange
3.5 in. Front Height, 4.05 in. Center Height, 4.6 in. Rear Height
Black Powder Coated Finish
Made In The USA

from

$746.99

Edelbrock part #71373 Pro-Flo XT intake manifold is designed for 1957-86 small-block Chevy V8 applications. The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque throughout the rp

Product Features:

1500-7000 RPM Range
Single Plane Type-Throttle Body XT Style Flange
9 in. Front Height, 9 in. Center Height, 8.2 in. Rear Height
Black Powder Coated Finish
Made In The USA

from

$423.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 Deg Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
Designed for Engine Swaps Using GM Vortec Heads
Accepts External Water Bypass
Works on Both Vortec and 1995 and Earlier Blocks
Accepts Late Model Waterneck-Alternators-HEI-A/C

from

$595.99

Edelbrock part #21011 Performer intake manifold is designed for street 1955-86 small-block Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle respons

from

$67.99

This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.

Product Features:

Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$44.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$100.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$20.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$44.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$1.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

Upgrade your 2008 Pontiac Grand Prix with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 2008 Pontiac Grand Prix, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Air Intakes are key to keeping your Grand Prix functioning at its best. At Advance Auto Parts, we offer a wide selection of 14 Air Intakes for the 2008 Pontiac Grand Prix, designed to meet your needs without breaking the bank. From Throttle Body Part replacements to Throttle Bodies & Carb Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2008 Pontiac Grand Prix at great prices. Our Air Intakes inventory for this model ranges from just $1.99 to $303.99, with an average price of $61.10. Our 14 Air Intakes in stock come from 8 trusted brands, so you’re sure to find the right part for your 2008 Pontiac Grand Prix without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Pontiac Grand Prix, we stock popular OEM and aftermarket Air Intakes from top names like Idemitsu, FELPRO, Dorman, and more. Idemitsu Air Intakes start at just $14.49 and boast an impressive 4.9 stars average rating from customers. FELPRO and Dorman also bring quality to the table, with Air Intakes available starting at $4.99, and at an average 4.6 stars rating. With 66 customer reviews and counting, our 2008 Pontiac Grand Prix Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Pontiac Grand Prix is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Prix in top shape, all in one place. Start shopping confidently below for your 2008 Pontiac Grand Prix!

Best-Selling Throttle Body Parts for 2008 Pontiac Grand Prixes

Enhance the driving experience in your Pontiac with 3 quality Throttle Body Part components, starting at $236.99.

show more show less

from

$236.99

OE Throttle Body Assemblies. The throttle body is an essential part of the inlet air stream of the modern gasoline engine. In combination with the electronic throttle control system, the throttle body assembly is designed to control the amount of fresh air entering the engine. Manufactured in U.S.A. on OE production line.

Product Features:

Actual OE Product
Plug & Play – No flash update needed
Exact fit, form, and function
Manufactured worldwide on OE production lines
Contains an actuator, a throttle plate and a throttle position sensor (potentiometer), which are integrated into one housing

from

$303.99

Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.
100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance.
Each unit is guaranteed to fit and function like the original.

from

$244.99

Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience

Most Popular 2008 Pontiac Grand Prix Throttle Bodies & Carb Parts

Customize your Pontiac with 3 Throttle Bodies & Carb Parts products like Throttle Body Mounting Gaskets, Throttle Position Sensor Connectors, and Throttle Control Motor Connector, all priced under $44.99.

show more show less

from

$32.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Utilizing high grade materials to ensure peak conductivity and perfect connections
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$44.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$6.29

Helps prevent excess air form entering the intake
Helps seal the intake and throttle from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

Top Picks for 2008 Pontiac Grand Prix Airboxes

Upgrade Pontiac Grand Prixes with top-quality Airboxes parts, including 4 OEM and aftermarket selections for your 2008 model.

show more show less

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$1.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

In-Demand Air Intake Hoses for 2008 Pontiac Grand Prixes

Select from 1 premium Air Intake Hoses parts for your 2008 Pontiac Grand Prix.

show more show less

from

$94.99

Direct replacement – fits and functions like original equipment
Quality construction – manufactured from premium materials for a long service life
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

Most Sold 2008 Pontiac Grand Prix Intake Manifold Parts

Explore our best-selling Pontiac parts for the 2008 Grand Prix among 3 OEM and aftermarket options starting from $14.49.

show more show less

from

$14.49

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$98.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$78.99

This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.

Product Features:

Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top-Rated Air Intakes Brands For Your 2008 Pontiac Grand Prix

Shop for the best-rated brands offering Air Intakes and other products for your 2008 Pontiac Grand Prixes. Below you’ll find some of our best rated Air Intakes from Idemitsu, FELPRO, and Dorman, and more. Air Intakes from these brands that fit a 2008 Grand Prix start at just $4.99 and are rated as high as 4.9 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.

Popular Idemitsu 2008 Pontiac Grand Prix Air Intakes

When it comes to maintaining or upgrading your 2008 Pontiac Grand Prix, using quality Air Intakes is essential to ensure durability and a perfect fit. Idemitsu ticks all of those boxes. We offer a wide selection of Idemitsu Air Intakes, specifically designed for the 2008 Pontiac Grand Prix. With over 1 Idemitsu brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49. Plus, with over 2 customer reviews and an average rating of 4.9 stars, you can trust that our Idemitsu Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $14.49

(2)

Type TLS Automatic Transmission Fluid, 1 Quart

“all good .”

Popular FELPRO 2008 Pontiac Grand Prix Air Intakes

FELPRO auto parts is one of the highest quality Air Intake brands in the market. Any 2008 Pontiac Grand Prix owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2008 Grand Prix, Advance Auto Parts carries a full inventory of 1 FELPRO Air Intakes. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these FELPRO Air Intakes range up to $98.99, plus, with more than 50 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.

from $98.99

(50)

Engine Intake Manifold Gasket Set

“Malheur gasket failed after 6 months, fellow or no go”

FAQs for 2008 Pontiac Grand Prix Air Intakes

Which Air Intakes are best-sellers for 2008 Pontiac Grand Prixes?

Out of 14 Air Intakes that fit 2008 Pontiac Grand Prixes, the following parts are the top sellers:

Upper Intake Manifold Gasket Set: 22 Piece Set (10053479) – $78.99
Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (9110071) – $1.99
GM Panel Retainer (11910769) – $4.99

What’s the price range for 2008 Pontiac Grand Prix Air Intakes?

Air Intake prices for the 2008 Pontiac Grand Prix start at $1.99 and go up to $303.99 for the most premium parts.

What’s the average price of a Air Intake for a 2008 Pontiac Grand Prix?

The average price for Air Intakes for the 2008 Pontiac Grand Prix is $61.10. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other Pontiac Grand Prix model years?

Yes, we currently carry Air Intakes for 45 model years of Pontiac Grand Prixes between 1962 and 2007. Air Intakes are bought most frequently for the following model years: 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, and 1999.

What are the cheapest Air Intakes for my 2008 Pontiac Grand Prix?

The cheapest 2008 Pontiac Grand Prix Air Intakes we carry in stock are:

Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (9110071) – $1.99
Bumper Retainer-Exterior-GM (10658498) – $4.49
GM Panel Retainer (11910769) – $4.99
Push-Type Rocker and Fender Liner Retainer – 3/8 In. Hole (12580470) – $4.99
Fuel Injection Throttle Body Seal (11906826) – $6.29

What are the top-rated Air Intakes that fit the 2008 Pontiac Grand Prix?

Out of 66 reviews by customers, our 2008 Pontiac Grand Prix Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2008 Pontiac Grand Prix and their top-rated products:

Airboxes
- GM Panel Retainer (11910769) – $4.99

What types of Air Intakes do you sell for my 2008 Pontiac Grand Prix?

As of 11/2/25, these are some of the most in-demand types of Air Intakes for a 2008 Pontiac Grand Prix:

Can I get help with 2008 Pontiac Grand Prix Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Air Intakes and more.

What is your return policy for Pontiac Grand Prix Air Intakes?

Advance Auto Parts keeps returns simple. For new Pontiac Grand Prix Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Pontiac Grand Prix Air Intakes

Cardone New – New Fuel Injection Throttle Body (Part No.6E-3023)

Dorman – Electronic Throttle Body (OE Fix) (Part No.977-362)

GM Genuine Parts – Electronic Throttle Body: New, Original Equipment (Part No.217-2296)

Dorman – Bumper Retainer-Exterior-GM (Part No.963-202)

Dorman – Push-Type Rocker and Fender Liner Retainer – 3/8 In. Hole (Part No.963-122D)

Dorman – GM Bumper Retainer (Part No.961-364D)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61093)

GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.217-1592)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60903)

Carquest – Electrical Connector (Part No.PT978)

Carquest Premium – Multi-Use Connector (Part No.PTA1166)

Dorman – Engine Air Intake Hose (Part No.696-144)

Edelbrock – Performer Intake Manifold for 1987-95 Small-Block Chevy, Black Finish (Part No.21043)

Edelbrock – Pro-Flo XT Small Block Chevy EFI Black Intake Manifold (Part No.71373)

Edelbrock – Performer Intake Manifold for GM 90 Deg V6 (3.8L & 4.3L), Vortec (Part No.2114)

Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.21011)

Dorman – Lower Intake Manifold Gasket Set: 18 Piece Set (Part No.615-206)

Felpro – Valley Pan Gasket Set (Part No.MS 96032)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98003 T)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9678-1)

Carquest Premium – Multi-Use Connector (Part No.PTA1357)

Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)

Dorman – GM Panel Retainer (Part No.963-021D)

Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)

Bosch – Electronic Throttle Body: New, Original Equipment Supplier (Part No.F00H600076)

Cardone New – New Fuel Injection Throttle Body (Part No.6E-3023)

Dorman – Electronic Throttle Body (OE Fix) (Part No.977-362)

Carquest – Electrical Connector (Part No.PT978)

Carquest Premium – Multi-Use Connector (Part No.PTA1357)

GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.217-1592)

Dorman – GM Panel Retainer (Part No.963-021D)

Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)

Dorman – Push-Type Rocker and Fender Liner Retainer – 3/8 In. Hole (Part No.963-122D)

Dorman – Bumper Retainer-Exterior-GM (Part No.963-202)

Dorman – Engine Air Intake Hose (Part No.696-144)

Idemitsu – Type TLS Automatic Transmission Fluid, 1 Quart (Part No.30040093-75000C)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98014 T)

Dorman – Upper Intake Manifold Gasket Set: 22 Piece Set (Part No.615-207)