2005 Pontiac Grand Prix Air Intakes
Find Your Specific 2005 Pontiac Grand Prix Air Intakes
Below you will find various in-demand Pontiac Air Intakes, components and accessories for your 2005 Grand Prix. Advance Auto Parts has popular Grand Prix parts like Intake Manifold Parts, Air Intake Hoses, Throttle Body Parts and more. You’ll also find aftermarket and OEM Air Intakes for other Grand Prix model years including
1999,
2000,
2001,
2002,
2003,
2004,
2006,
2007,
2008 and more. Select a category of 2005 Pontiac Grand Prix Air Intakes below and start saving instantly.
Popular 2005 Pontiac Grand Prix Air Intakes Categories
Essential Air Intakes for 2005 Pontiac Grand Prixes
GM Genuine Parts – Electronic Throttle Body: New, Original Equipment (Part No.217-2296)
from
$424.99
GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Helps provide air flow for proper fuel/air mixture
- Allows for a quick throttle response
- Assists in cold engine starts
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – Electronic Throttle Body (OE Fix) (Part No.977-362)
from
$244.99
Original equipment throttle bodies often fail from moisture and oil intrusion and failed internal electronics. This Dorman OE FIX throttle body features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures.
Product Features:
See More
Product Features:
- Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
- New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
Cardone New – New Fuel Injection Throttle Body (Part No.6E-3023)
from
$303.99
All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.
Product Features:
See More
Product Features:
- Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
- Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.
- 100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance.
- Each unit is guaranteed to fit and function like the original.
Dorman – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (Part No.555-018)
from
$2.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.10232)
from
$5.99
Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for a long service life
- Torque values listed on parts (where applicable)
- Easy to install
- Constructed to strict engineering quality standards
Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – GM Panel Retainer (Part No.963-021D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)
from
$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98003 T)
from
$100.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 93346)
from
$24.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 95809-1)
from
$57.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Edelbrock – Performer RPM Small Block Chevy AIR-Gap Intake Manifold (Part No.7501)
from
$374.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake
- For Square Bore Carburetors Only
Edelbrock – Performer RPM Small Block Chevy Intake Manifold (Part No.7101)
from
$296.99Product Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6550 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- Edelbrock Total Power Package Maximizes Gains
- Also in Polished/PermaStar/EnduraShine Finish
Edelbrock – Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR (Part No.2156)
from
$430.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61028)
from
$5.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60903)
from
$10.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Each gasket is built to meet or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61093)
from
$8.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Push-Type Rocker and Fender Liner Retainer – 3/8 In. Hole (Part No.963-122D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – GM Bumper Retainer (Part No.961-364D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Rivet-Push In-Hole Diameter .250 In. (Part No.799-110)
from
$5.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest – Electrical Connector (Part No.PT978)
from
$32.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Utilizing high grade materials to ensure peak conductivity and perfect connections
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
Carquest Premium – Multi-Use Connector (Part No.PTA1166)
from
$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Engine Air Intake Hose (Part No.696-144)
from
$94.99
This engine air intake hose was designed as a direct replacement for the original equipment intake hose. Engineered for a perfect fit and easy installation, it includes all necessary fittings. Made of quality materials for a long service life.
Product Features:
See More
Product Features:
- Direct replacement – fits and functions like original equipment
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment quality at a lower price
- Quality tested – has undergone testing to ensure proper fit and performance
Upgrade your 2005 Pontiac Grand Prix with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 2005 Pontiac Grand Prix, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Air Intakes are key to keeping your Grand Prix functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Air Intakes for the 2005 Pontiac Grand Prix, designed to meet your needs without breaking the bank.
From
Intake Manifold Part
replacements to
Air Intake Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2005 Pontiac Grand Prix at great prices.
Our Air Intakes inventory for this model
ranges from just $1.99 to $424.99, with
an average price of $55.74.
Our 16 Air Intakes in stock come from 6 trusted brands, so you’re sure to find the right part for your 2005 Pontiac Grand Prix without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Pontiac Grand Prix, we stock popular OEM and aftermarket Air Intakes from top names
like FELPRO, GM Genuine, Dorman, and more.
FELPRO Air Intakes
start at just $57.99 and boast an impressive 4.6 stars average rating from customers.
GM Genuine and Dorman also bring quality to the table, with Air Intakes available starting at $4.99, and at an average 4.5 stars rating.
With 228 customer reviews and counting, our 2005 Pontiac Grand Prix Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2005 Pontiac Grand Prix is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Prix in top shape, all in one place.
Start shopping confidently below for your 2005 Pontiac Grand Prix!
Best-Selling Intake Manifold Parts for 2005 Pontiac Grand Prixes
Enhance the driving experience in your Pontiac with 6 quality Intake Manifold Part components, starting at $2.99.
Idemitsu – Type TLS Automatic Transmission Fluid, 1 Quart (Part No.30040093-75000C)
from
$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98014 T)
from
$98.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Dorman – Upper Intake Manifold Gasket Set: 22 Piece Set (Part No.615-207)
from
$78.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
- Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 95977-1)
from
$61.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 95809-1)
from
$57.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Dorman – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (Part No.555-018)
from
$2.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Most Popular 2005 Pontiac Grand Prix Air Intake Hoses
Customize your Pontiac with 1 Air Intake Hoses products
like Air Intake Hoses, all
priced under $94.99.
Dorman – Engine Air Intake Hose (Part No.696-144)
from
$94.99
This engine air intake hose was designed as a direct replacement for the original equipment intake hose. Engineered for a perfect fit and easy installation, it includes all necessary fittings. Made of quality materials for a long service life.
Product Features:
See More
Product Features:
- Direct replacement – fits and functions like original equipment
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment quality at a lower price
- Quality tested – has undergone testing to ensure proper fit and performance
Top Picks for 2005 Pontiac Grand Prix Throttle Body Parts
Upgrade Pontiac Grand Prixes with top-quality Throttle Body Parts parts, including 2 OEM and aftermarket selections for your 2005 model.
GM Genuine Parts – Electronic Throttle Body: New, Original Equipment (Part No.217-2296)
from
$424.99
GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Helps provide air flow for proper fuel/air mixture
- Allows for a quick throttle response
- Assists in cold engine starts
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Cardone New – New Fuel Injection Throttle Body (Part No.6E-3023)
from
$303.99
All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.
Product Features:
See More
Product Features:
- Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
- Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.
- 100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance.
- Each unit is guaranteed to fit and function like the original.
In-Demand Airboxes for 2005 Pontiac Grand Prixes
Select from 5 premium Airboxes parts for your 2005 Pontiac Grand Prix, with prices ranging from $1.99 to $4.99.
Dorman – GM Panel Retainer (Part No.963-021D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – GM Bumper Retainer (Part No.961-364D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)
from
$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Push-Type Rocker and Fender Liner Retainer – 3/8 In. Hole (Part No.963-122D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Bumper Retainer-Exterior-GM (Part No.963-202)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Most Sold 2005 Pontiac Grand Prix Throttle Bodies & Carb Parts
Explore our best-selling Pontiac parts for the 2005 Grand Prix among 2 OEM and aftermarket options starting from $6.29.
Carquest – Electrical Connector (Part No.PT978)
from
$32.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Utilizing high grade materials to ensure peak conductivity and perfect connections
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.217-1592)
from
$6.29
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent excess air form entering the intake
- Helps seal the intake and throttle from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Top-Rated Air Intakes Brands For Your 2005 Pontiac Grand Prix
Shop for the best-rated brands offering Air Intakes and other products for your 2005 Pontiac Grand Prixes. Below you’ll find some of our best rated Air Intakes from FELPRO, GM Genuine, and Dorman, and more. Air Intakes from these brands that fit a 2005 Grand Prix start at just $4.99 and are rated as high as 4.6 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2005 Pontiac Grand Prix Air Intakes
When it comes to maintaining or upgrading your 2005 Pontiac Grand Prix, using quality Air Intakes is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Air Intakes, specifically designed for the 2005 Pontiac Grand Prix. With over 3 FELPRO brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $57.99, with an average price of just $72.99. Plus, with over 69 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$98.99
(50)
Engine Intake Manifold Gasket Set
“Malheur gasket failed after 6 months, fellow or no go”
from
$61.99
(3)
Engine Intake Manifold Gasket Set
“Great product, had no issues. I would purchase this item again.”
Popular GM Genuine 2005 Pontiac Grand Prix Air Intakes
GM Genuine auto parts is one of the highest quality Air Intake brands in the market. Any 2005 Pontiac Grand Prix owner should feel confident when installing genuine GM Genuine parts in their vehicle. To ensure the best fit and performance for your 2005 Grand Prix, Advance Auto Parts carries a full inventory of 1 GM Genuine Air Intakes. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these GM Genuine Air Intakes range up to $424.99, plus, with more than 1 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.
from
$424.99
(1)
Electronic Throttle Body: New, Original Equipment
“Looks like it may have stopped the problem of the engine stalling when the A/C was on and stopped at a light.”
FAQs for 2005 Pontiac Grand Prix Air Intakes
Which Air Intakes are best-sellers for 2005 Pontiac Grand Prixes?
Out of 16 Air Intakes that fit 2005 Pontiac Grand Prixes, the following parts are the top sellers:
- GM Bumper Retainer (11910885) – $4.99
- Upper Intake Manifold Gasket Set: 22 Piece Set (10053479) – $78.99
- Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (9110071) – $1.99
What’s the price range for 2005 Pontiac Grand Prix Air Intakes?
Air Intake prices for the 2005 Pontiac Grand Prix start at $1.99 and go up to $424.99 for the most premium parts.
What’s the average price of a Air Intake for a 2005 Pontiac Grand Prix?
The average price for Air Intakes for the 2005 Pontiac Grand Prix is $55.74. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Pontiac Grand Prix model years?
What are the cheapest Air Intakes for my 2005 Pontiac Grand Prix?
The cheapest 2005 Pontiac Grand Prix Air Intakes we carry in stock are:
- Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (9110071) – $1.99
- Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (16140179) – $2.99
- Bumper Retainer-Exterior-GM (10658498) – $4.49
- GM Bumper Retainer (11910885) – $4.99
- GM Panel Retainer (11910769) – $4.99
What are the top-rated Air Intakes that fit the 2005 Pontiac Grand Prix?
Out of 228 reviews by customers, our 2005 Pontiac Grand Prix Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2005 Pontiac Grand Prix and their top-rated products:
- Throttle Body Parts
- Electronic Throttle Body: New, Original Equipment (18057416) – $424.99
- Airboxes
- Electronic Throttle Body: New, Original Equipment (18057416) – $424.99
What types of Air Intakes do you sell for my 2005 Pontiac Grand Prix?
As of 11/2/25, these are some of the most in-demand types of Air Intakes for a 2005 Pontiac Grand Prix:
Can I get help with 2005 Pontiac Grand Prix Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Air Intakes and more.
What is your return policy for Pontiac Grand Prix Air Intakes?
Advance Auto Parts keeps returns simple. For new Pontiac Grand Prix Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
