2008 Pontiac G5 Transmission Parts

Below you will find various in-demand Pontiac Transmission Parts, components and accessories for your 2008 G5. Advance Auto Parts has popular G5 parts like Transmission Bearings, Transmission Cooler and Parts, Automatic Transmission Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other G5 model years including 2007 2009 and more. Select a category of 2008 Pontiac G5 Transmission Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2008 Pontiac G5 Transmission Parts Categories

Transmission Torque Converters

OE Transmission Coolers

Transmission Solenoids

Transmission Control Modules

Transmission Oil Cooler Lines

Automatic Transmission Shift Solenoids

Transmission Pan Gaskets

Shift Interlock Solenoids

Transmission Oil Cooler Fittings

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Master Repair Kits

Back Up and Neutral Safety Switches

Transmission Oil Pan Gaskets

Speed Sensors

Transmission Speed Sensors

Automatic Transmission Output Shaft Seals

Back Up Light Relays

Back Up Light Switch Connectors

Torque Converter Seals

Manual Transmission Output Shaft Seals

Shaft Seals

Miscellaneous Automatic Transmission Seals

Back Up Lamp Connectors

Manual Transmission Drive Axle Seals

Park Position Switches

Neutral Safety Relays

Remanufactured Automatic Transmissions

Transmission Oil Cooler Fitting Seals

Automatic Transmission Shift Lock Control Solenoid Relay Connectors

Automatic Transmission Output Shaft Seal Kits

Auto Trans Differential Bearing and Race Set

Essential Transmission Parts for 2008 Pontiac G5s

from

$46.99

Shift Solenoid

from

$18.99

Product Features:

Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.

from

$29.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$18.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$38.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$26.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$73.99

Anchor 3086 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2003-2011
Weight approx: 2 Lbs

from

$174.99

GM Genuine Parts Transmission Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules help control shifting in vehicles with automatic transmissions. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$752.99

AT MASTER REPAIR KIT

from

$35.99

ACDelco GM Original Equipment Automatic Transmission Speed Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$30.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$43.49

REUSABLE AT PAN GSKT

from

$32.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$16.99

This Dorman Automatic Transmission Oil Cooler Gasket eliminates leaks where the oil cooler line connects to the transmission. Gasket may break down over time, causing leaks, and should be replaced any time the oil cooler line and transmission are separated.

Product Features:

Durable construction – rubber over steel construction creates a positive seal and retains its shape
Direct replacement – fits and functions like original equipment
Easy to install – direct-fit, no special tools required
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$21.29

AT SEAL DRIVE AXLE

from

$2023.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$64.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$191.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Meets or exceeds OE specifications

from

$113.99

GM Genuine Parts Park / Neutral Position Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$9.99

Design type: spring loaded; multi-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$70.99

AT CONTR SOLENOID

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$20.29

Product Features:

Brand may vary by location

from

$120.99

This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 2008 Pontiac G5 with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2008 Pontiac G5, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Transmission Parts are key to keeping your G5 functioning at its best. At Advance Auto Parts, we offer a wide selection of 60 Transmission Parts for the 2008 Pontiac G5, designed to meet your needs without breaking the bank. From Transmission Bearing replacements to Transmission Cooler and Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2008 Pontiac G5 at great prices. Our Transmission Parts inventory for this model ranges from just $6.99 to $2,023.99, with an average price of $134.59. Our 60 Transmission Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 2008 Pontiac G5 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Pontiac G5, we stock popular OEM and aftermarket Transmission Parts from top names like National, Driveworks, Imperial, and more. National Transmission Parts start at just $6.99 and boast an impressive 4.3 stars average rating from customers. Driveworks and Imperial also bring quality to the table, with Transmission Parts available starting at $8.49, and at an average 4.2 stars rating. With 510 customer reviews and counting, our 2008 Pontiac G5 Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Pontiac G5 is always ready to roll. We’re committed to providing you with everything you need to keep your G5 in top shape, all in one place. Start shopping confidently below for your 2008 Pontiac G5!

Best-Selling Transmission Bearings for 2008 Pontiac G5s

Enhance the driving experience in your Pontiac with 1 quality Transmission Bearing components, starting at $26.99.

show more show less

from

$26.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

Top Picks for 2008 Pontiac G5 Automatic Transmission Parts

Upgrade Pontiac G5s with top-quality Automatic Transmission Parts parts, including 10 OEM and aftermarket selections for your 2008 model.

show more show less

from

$46.99

Shift Solenoid

from

$174.99

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$70.99

AT CONTR SOLENOID

from

$164.99

This transmission control module has been fully tested and validated to match the function and performance of the original TCM on specified vehicle applications.

Product Features:

Direct replacement – this transmission control module matches the function and performance of the stock TCM on specified years, makes and models
Ideal solution – this transmission control module is a reliable replacement for an original part that has failed due to corrosion or electrical failure
Thoroughly tested – this TCM has undergone full vehicle simulator testing to confirm full functionality for reliable performance
Requires programming – after installation, module must be programmed with original manufacturer software, such as through a Remote Assist Programming (RAP) Kit

from

$120.99

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2023.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2023.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2023.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2023.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$26.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

In-Demand Transmission Seals for 2008 Pontiac G5s

Select from 7 premium Transmission Seals parts for your 2008 Pontiac G5, with prices ranging from $6.99 to $30.49.

show more show less

from

$9.99

Design type: spring loaded; multi-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$30.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$17.29

AT SEAL DRIVE AXLE

from

$21.29

AT SEAL DRIVE AXLE

from

$20.29

Product Features:

Brand may vary by location

from

$14.29

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Most Sold 2008 Pontiac G5 Transmission Mounts

Explore our best-selling Pontiac parts for the 2008 G5 among 5 OEM and aftermarket options starting from $55.99.

show more show less

from

$73.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2003-2011
Weight approx: 2 Lbs

from

$118.99

Anchor 3081 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2005-2011
Weight approx: 3 Lbs

from

$94.99

Anchor 3291 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2005-2011
Weight approx: 3 Lbs

from

$91.99

Anchor 3451 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2005-2011
Weight approx: 3 Lbs

from

$55.99

Anchor 3459 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2003-2011
Weight approx: 4 Lbs

Top-Rated Transmission Parts Brands For Your 2008 Pontiac G5

Shop for the best-rated brands offering Transmission Parts and other products for your 2008 Pontiac G5s. Below you’ll find some of our best rated Transmission Parts from National, Driveworks, and Imperial, and more. Transmission Parts from these brands that fit a 2008 G5 start at just $6.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 2008 Pontiac G5 Transmission Parts

When it comes to maintaining or upgrading your 2008 Pontiac G5, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 2008 Pontiac G5. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $17.66. Plus, with over 59 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $35.99

(23)

Multi-Purpose Bearing

“fits my 86 cj7, seems to be good quality”

from $6.99

(20)

Multi Purpose Seal

“Would have been fine most likely – if correct seal was in the box. For redoing a Front Crank Seal on a 4 cylinder 89 Ranger.”

from $9.99

(16)

Multi-Purpose Seal

“worked well”

Popular Driveworks 2008 Pontiac G5 Transmission Parts

Driveworks auto parts is one of the highest quality Transmission Part brands in the market. Any 2008 Pontiac G5 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2008 G5, Advance Auto Parts carries a full inventory of 2 Driveworks Transmission Parts. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Driveworks Transmission Parts range from $8.49 to $26.99, plus, with more than 16 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $26.99

(14)

Tapered Cone/Cup Wheel Bearing Set

“Advance Auto website when entering my 1989 Ford F150 doesn’t ask if it is 2 wheel or 4 wheel drive. So I had to return the first set”

from $8.49

(2)

Oil Seal

“Needed to fix transmission seal leak”

FAQs for 2008 Pontiac G5 Transmission Parts

Which Transmission Parts are best-sellers for 2008 Pontiac G5s?

Out of 60 Transmission Parts that fit 2008 Pontiac G5s, the following parts are the top sellers:

Tapered Cone/Cup Wheel Bearing Set (5050723) – $26.99
Multi-Purpose Bearing (3275876) – $35.99
Econo-Kool Transmission Oil Cooler (6014720) – $40.99

What’s the price range for 2008 Pontiac G5 Transmission Parts?

Transmission Part prices for the 2008 Pontiac G5 start at $6.99 and go up to $2,023.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2008 Pontiac G5?

The average price for Transmission Parts for the 2008 Pontiac G5 is $134.59. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Pontiac G5 model years?

Yes, we currently carry Transmission Parts for 1 model years of Pontiac G5s between 2007 and 2009. Transmission Parts are bought most frequently for the following model years: 2009 and 2007.

What are the cheapest Transmission Parts for my 2008 Pontiac G5?

The cheapest 2008 Pontiac G5 Transmission Parts we carry in stock are:

Multi Purpose Seal (3271471) – $6.99
Parking Brake Switch (11894694) – $7.49
Oil Seal (5442583) – $8.49
Transmission Line Connector – 3/8 in OD Tube x 9/16-18 UNF Thread (10916185) – $8.99
Multi-Purpose Seal (18443030) – $9.99

What are the top-rated Transmission Parts that fit the 2008 Pontiac G5?

Out of 510 reviews by customers, our 2008 Pontiac G5 Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2008 Pontiac G5 and their top-rated products:

Automatic Transmission Pan and Gaskets
- Transmission Oil Pan Gasket 12 Bolt Hole One Piece Gasket (15780903) – $29.99
- Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart (26949826) – $70.99
Automatic Transmission Differential
- Transmission Oil Pan Gasket 12 Bolt Hole One Piece Gasket (15780903) – $29.99
- Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart (26949826) – $70.99
Back Up Neutral Safety Parts
- Transmission Oil Pan Gasket 12 Bolt Hole One Piece Gasket (15780903) – $29.99
- Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart (26949826) – $70.99

What types of Transmission Parts do you sell for my 2008 Pontiac G5?

As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 2008 Pontiac G5:

Can I get help with 2008 Pontiac G5 Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Transmission Parts and more.

What is your return policy for Pontiac G5 Transmission Parts?

Advance Auto Parts keeps returns simple. For new Pontiac G5 Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Pontiac G5 Transmission Parts

ATP – Shift Solenoid (Part No.JE-54)

Carquest – A/C Auto Temperature Control Relay (Part No.R3107)

Felpro – Transmission Oil Pan Gasket 12 Bolt Hole One Piece Gasket (Part No.TOS 18715)

Carquest – Multi-Purpose Relay (Part No.83A1008)

Carquest Premium – Multi-Use Connector (Part No.PTA1491)

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

Anchor – Transmission Mount: Rear Left, 1 Piece (Part No.3086)

GM Genuine Parts – Transmission Control Module (Part No.24252114)

ATP – AT MASTER REPAIR KIT (Part No.JM-25)

GM Genuine Parts – Automatic Transmission Speed Sensor (Part No.24218077)

National – Multi-Purpose Seal (Part No.5693)

ATP – REUSABLE AT PAN GSKT (Part No.JG-138)

Carquest Premium – Multi-Use Connector (Part No.PTA1749)

Dorman – Help – Transmission Oil Cooler Seal (Part No.66998)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

ATP – AT SEAL DRIVE AXLE (Part No.XO-16)

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280232)

National – Multi Purpose Seal (Part No.8792S)

Driveworks – Oil Seal (Part No.S-4072N)

Dorman – Transmission Oil Cooler Line (Part No.624-348)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM73CW)

GM Genuine Parts – Park/Neutral Position Switch (Part No.D2259C)

National – Multi-Purpose Seal (Part No.3543)

ATP – AT CONTR SOLENOID (Part No.JE-8)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Driveworks – Auto Transmission Output Shaft Seal Kit (Part No.S-5693)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-982)

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Dorman – Transmission Oil Cooler Line (Part No.624-348)

Dorman – Help – Transmission Oil Cooler Seal (Part No.66998)

ATP – Shift Solenoid (Part No.JE-54)

GM Genuine Parts – Transmission Control Module (Part No.24252114)

ATP – AT CONTR SOLENOID (Part No.JE-8)

Dorman – Remanufactured Transmission Control Module (Part No.599-120)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-982)

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280226)

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280225)

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280232)

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280234)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBA4967)

National – Multi-Purpose Seal (Part No.3543)

National – Multi Purpose Seal (Part No.8792S)

National – Multi-Purpose Seal (Part No.5693)

ATP – AT SEAL DRIVE AXLE (Part No.XO-15)

ATP – AT SEAL DRIVE AXLE (Part No.XO-16)

Driveworks – Auto Transmission Output Shaft Seal Kit (Part No.S-5693)

Schaeffler – Shaft Seal (Part No.SS2421)

Anchor – Transmission Mount: Rear Left, 1 Piece (Part No.3086)

Anchor – Transmission Mount: Front Left, 1 Piece (Part No.3081)

Anchor – Transmission Mount: Left, 1 Piece (Part No.3291)

Anchor – Transmission Mount: Front Left, 1 Piece (Part No.3451)

Anchor – Transmission Mount: Left, 1 Piece (Part No.3459)