2008 Nissan Altima Motor Oil

FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

Pennzoil Platinum High Mileage SAE 5W-30 is a full synthetic motor oil that is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil high mileage portfolio. As your car ages, leaks may develop and cause higher oil consumption and oil burn off, potentially causing your engine to need frequent top-offs. Pennzoil Platinum High Mileage motor oil is enhanced with an excellent combination of special conditioning seal agents and additives to help stop leaks from seals and reduce the oil consumption that is typical of older and worn engines. Our full synthetic high mileage motor oil also protects engines from loss of horsepower, offers excellent performance in extreme temperatures, provides unsurpassed wear protection, and protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Pennzoil Platinum High Mileage SAE 5W-30 is also engineered to help keep engines clean by gently lifting deposits and keeping them away from critical moving engine parts. In fact, it keeps pistons up to 50% cleaner than the toughest industry standards.

Product Features:

• Full synthetic 5w-30 engine oil made from natural gas, not crude, using pennzoil’s patented gas-to-liquid pureplus technology
• Designed for for vehicles with over 75,000 miles
• Pennzoil platinum high mileage 5w-30 keeps pistons up to 45% cleaner than the toughest industry standard (based on sequence iiih results)
• No other leading high mileage engine oil provides better protection from friction (based on sequence iva wear test using sae 5w-30)
• Formulated to deliver less oil burn off than high mileage engine oils made from crude oil
• Helps protect engines from loss of horsepower
• Provides faster low-temperature oil flow and protects in extreme heat

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
• Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
• Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
• Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

• Better wear protection
• Increased fuel efficiency
• Better protection of the expensive catalytic emission system
• Improved compatibility with fuels containing ethanol
• Superior corrosion protection
• High Performance: SAE 0W-20 Synthetic Engine Oil is specially formulated to provide high performance for gasoline and diesel engines of all types, including cars, trucks, SUVs, motorcycles, and boats.

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

• 3X Stronger against viscosity breakdown than leading full synthetic (Based on Kurt Orbahn test in 5W-30 grade)
• 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
• 6X Better Wear Protection
• 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
• Advanced Friction Reduction: Transforms its structure under pressure to keep metal parts apart, reducing friction and unlocking maximum engine performance, which can help prevent up to 10% performance loss due to friction.
• Engineered for Modern Engines: Specially designed to withstand the stress of today’s smaller, more powerful engines, ensuring optimal performance and protection under increased pressure and demands.
• Full Synthetic Composition: As a full synthetic motor oil with a 5W-30 SAE oil weight, Castrol EDGE offers superior protection and performance, making it the natural choice for drivers seeking the best for their vehicles.

Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 0W-20. This formula utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 0W-20 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is America’s No. 1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing¿results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:

• Mobil 1 High Mileage full-synthetic motor oil 0W-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.(1)
• Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI ) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees F ) and low temperature protection (to -30 degrees F )
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Manufacturer Part Number: 122535
• Extended Engine Life: This high mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes.
• Temperature Control: Proven to cool engine temperatures by over 10%, Mobil 1 helps to keep your engine running at lower temperatures compared to conventional oil.
• Oxidation Control: Mobil 1 High Mileage full-synthetic motor oil 0W-20 helps control oxidation to prevent oil breakdown, ensuring long-lasting performance and protection.
• Versatile Compatibility: Recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines.

Castrol EDGE 10W-30 Full Synthetic Motor Oil is Castrol’s strongest oil, ideal for drivers seeking the best in sludge protection, wear protection, and maximum engine performance. This oil is 3X stronger against viscosity breakdown than the leading full synthetic, 10X better in high-temperature performance, and offers 6X better wear protection. It meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M, and 4718M standards, and fulfills the engine test requirements of Chrysler MS 6395, ensuring top-tier performance and reliability. Unlock maximum performance with every drive.

Product Features:

• 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
• 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
• 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
• Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395
• Advanced Fluid TITANIUM Technology: Incorporates Fluid TITANIUM Technology, making it Castrol’s strongest oil for drivers who demand the best in sludge protection, wear protection, and maximum engine performance.

Keep your engine running at peak efficiency while improving fuel economy. Engineered for today’s advanced engines, Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 helps to improve fuel economy(1) and extend engine life for vehicles of all ages. Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to your vehicle. Same oil. Less waste. Mobil 1 12 quart convenience pack (bag in box) uses 87% less plastic and is manufactured in a zero waste to landfill facility. Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s #1 selling synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Potential fuel economy improvement obtained by switching from higher-viscosity oils to a lower-viscosity grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions, and your current engine oil viscosity. (2)Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is low-viscosity to help improve fuel economy.(1)
• Utilizes Mobil 1s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
• Helps protect critical engine parts for up to 10,000 miles between oil changes,(2) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Manufacturer Part Number: 125219

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

• Better wear protection
• Increased fuel efficiency
• Better protection of the expensive catalytic emission system
• Improved compatibility with fuels containing ethanol
• Superior corrosion protection
• Meets ILSAC GF-5 and Dexos1 performance requirements

Liqui Moly’s Leichtlauf High Tech 5W-40 is a fully synthetic, premium low-friction engine oil for all-season use in gasoline and diesel engines without diesel particulate filters (DPF). The combination of innovative base oils – based on synthesis technology and the latest additive technology – guarantees an engine oil that reduces oil and fuel consumption and that ensures fast lubrication of the engine. Depending on the manufacturer instructions, oil change intervals of up to 40,000 km are possible. Ideally suited for modern gasoline and diesel engines with multi-valve technology, turbocharger and with or without charge air cooling. Especially suitable where there are long intervals between changes and heavy duty engine requirements.

Product Features:

• All season use reliable at high and low temperatures
• Suited for modern gasoline and diesel engines with multivalve technology, turbocharger and with or without charge air cooling
• An engine oil that reduces oil and fuel consumption
• Ensures fast lubrication of the engine
• Made in germany
• Low-friction formula: Leichtlauf LIQUI-MOLY Synthetic Engine Oil 5W-40 is a premium, fully synthetic engine oil that reduces oil and fuel consumption, thanks to its low-friction formula.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

• Phosphorus replacement technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
• Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
• Part synthetic oil: GTX High Mileage Engine Oil is a part synthetic oil that provides extra protection for older vehicles, making it an ideal choice for high mileage engines.
• Protects against sludge, wear and burn-off: This synthetic blend engine oil helps extend the life of your engine by protecting against sludge, wear and burn-off, ensuring that your engine runs smoothly for longer.

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
• 40% better wear protection vs. industry standard as tested in the sequence ivb engine test
• 25% better deposit protection with superior engine cleaning detergents as tested in the gmod engine test
• Exceptional high/low temperature protection defends your motor no matter the weather conditions
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn, gm dexos 1 gen 3
• Superior engine protection: Valvoline SynPower Full Synthetic Engine Oil provides superior protection against engine sludge and varnish, ensuring your engine stays clean and running smoothly.

Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 0W-20. This formula utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 0W-20 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is America’s #1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing¿results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 high mileage full-synthetic engine oil 0w-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.(1)
• Utilizes Mobil 1’s signature triple action formula to deliver outstanding engine performance, protection, and cleanliness
• Meets ilsac gf-6 standards to help provide low-speed pre-ignition (lspi) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees f) and low temperature protection (to -30 degrees f)
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Manufacturer part number: 122536

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• Synthetic Blend: Our unique combination of synthetic and premium conventional oils provides superior protection against wear, friction, heat, and deposits.

Castrol EDGE Euro Car 5W-30 A3/B4 Full Synthetic Motor Oil transforms under pressure, increasing film strength to prevent oil breakdown and reduce friction, unlocking maximum performance. Optimized to deliver 40% better performance than required by ACEA standards, it is recommended by world-leading auto manufacturers. This full-synthetic oil provides engine protection for the entire drain interval, even under the extreme pressure of high-output engines. Formulated for the latest technology, high-output engines that operate at extreme temperatures, it meets API CF/SL, ACEA A3/B4, BMW LL 01, Ford WSS-M2C937-A, MB Approval 229.3/229.5, Porsche A40, and VW 502 00/505 00 specifications, covering European OEM gasoline requirements for BMW, Mercedes-Benz, Porsche, and VW/Audi.

Product Features:

• Optimized to deliver 40% better performance than required by ACEA standards
• Recommended by world leading auto manufacturers
• Engine protection for the entire drain interval even under extreme pressure of high output engines
• Meets API CF/SL, ACEA A3/B4, BMW LL 01, Meets Ford WSS-M2C937-A, MB Approval 229.3/229.5, Porsche A40, VW 502 00/505 00
• Advanced Formulation: Specifically formulated for the latest technology, high-output engines that operate at extreme temperatures, ensuring reliable performance.

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• ENHANCED MAXLIFE TECHNOLOGY PREVENTS engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• TREAT AND PREVENT LEAKS with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% EXTRA DEFENSE AGAINST DEPOSITS, sludge, corrosion and rust via interior-cleansing detergents
• EXTREME TEMPERATURE PROTECTION through our high-quality base oils and superior viscosity modifiers
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• Enhanced Wear Protection: Fortified with advanced wear additives to safeguard critical engine components, ensuring longevity for vehicles with over 75,000 miles.
• Friction-Fighting Agents: Contains friction-fighting agents to reduce engine friction, enhancing overall engine efficiency and performance.

Pennzoil Platinum full synthetic SAE 0W-20 motor oil is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high-quality base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Pennzoil Platinum full synthetic SAE 0W-20 motor oil is licensed and meets the vehicle warranty requirements of GM’s dexos 1 Gen 2 specifications that are set forth to meet today’s modern engine technologies. This means that our Pennzoil Platinum full synthetic products meet the stringent requirements of leading car manufacturers. Why does this matter? Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines.

Product Features:

• Full synthetic 0W-20 engine oil made from made from natural gas, not crude, using Pennzoil’s patented gas-to-liquid PurePlus Technology
• Provides better fuel economy-drive on average an extra 550 miles per year (versus a dirty engine)
• Pennzoil Platinum 0W-20 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results)
• No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Helps protect engines from loss of power
• Formulated for modern turbocharged engines-GF-6, API SP/SP-Resource Conserving and all previous categories
• Superior Purity: Contains 99.5% pure base oil with fewer impurities compared to base oils made from crude oil, ensuring optimal engine performance.
• Advanced Additive Technology: Combines high-quality base oil with advanced additives to create one of the best formulations in the Pennzoil portfolio.
• Meets Modern Engine Requirements: Licensed and meets GM’s dexos 1 Gen 2 specifications, ensuring compatibility with today’s modern engine technologies and stringent car manufacturer requirements.
• Complete Engine Protection: Provides protection against abnormal combustion phenomena like low-speed pre-ignition in modern turbocharged gasoline direct injection (TGDI) engines, ensuring complete engine protection.

Uniquely designed for your drive, Pennzoil Extended Care Full Synthetic motor oil combats engine aging to extend the life of your engine

Product Features:

• Pennzoil Extended Care Full Synthetic helps keep your engine clean by preventing engine deposits and formation of sludge
• Natural gas is synthesized into a 99.5% pure base oil, resulting in better oxidative stability, cold temperature performance, and volatility control
• Each Pennzoil premium oil is specially formulated to meet the requirements of your engine and unique driving style
• Recommended for use in all vehicles requiring the use of SAE 0W-20 or 5W-20 viscosity grade engine oils

FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Engine Cleaning and Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
• Versatile Protection: Suitable for domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
• Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos®1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos®1 Gen 3 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM dexos«1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
• Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
• Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
• Fully Licensed GM dexos«1 Gen 3: This oil is a fully licensed GM dexos«1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.

Castrol® GTX® is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.

Product Features:

• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Helps minimize oil consumption
• Meets ILSAC GF-6 specs
• Engine Life Extension: Castrol« GTX« has been helping to extend engine life for over 50 years, making it one of the most trusted motor oil brands today.
• Conventional Oil Composition: As a premium conventional motor oil, Castrol« GTX« meets the needs of both consumers and vehicle manufacturers.
• Superior Performance: Exceeds tough industry standards by protecting against new oil splatter formation, ensuring optimal engine performance.
• Versatile SAE Weight: With an SAE oil weight of 10W-40, Castrol« GTX« is suitable for a wide range of vehicles, providing reliable protection and performance.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-Speed Pre-Ignition Control
• Chain Wear Protection
• Piston Cleanliness
• Turbo-Compatibility
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
• High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
• Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
• SAE oil weight of 10W-30, making it a dependable choice for various engine types.

Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 0W-20. This formula utilizes Mobil 1s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup-keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks-including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is Americas No. 1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing, results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.(1)
• Utilizes Mobil 1s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Manufacturer Part Number: 120769
• Extended Engine Life: This high mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes.
• Temperature Control: Proven to cool engine temperatures by over 10%, Mobil 1 helps to keep your engine running at lower temperatures compared to conventional oil.
• Oxidation Control: Mobil 1 High Mileage motor oil helps control oxidation to prevent oil breakdown, ensuring long-lasting performance and protection.
• Versatile Compatibility: Recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines.

Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. Mobil 1 helps to keep your engine running at lower temperatures. (2) This technologically advanced motor oil is proven to cool engine temperatures by over 10%. (3) Its formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing results may vary. (4) Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO Full Synthetic/52 weeks ending July 1, 2023.)

Product Features:

• Mobil 1 advanced full-synthetic engine oil 5w-30 utilizes Mobil 1’s signature triple action formula to deliver outstanding engine performance, protection, and cleanliness.
• Helps protect critical engine parts for up to 10,000 miles between oil changes,(1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ilsac gf-6 standards to help provide low-speed pre-ignition (lspi) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Provides excellent internal engine heat protection (up to 500 degrees f) and low temperature protection (to -30 degrees f)
• Manufacturer part number: 124317

FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Protection for High Mileage Engines: Designed for engines with over 75,000 miles, this oil provides the ultimate protection, making it ideal for higher mileage vehicles.
• Advanced LSPI Prevention Technology: Contains additive technology to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines, helping to prevent premature engine fai

Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:

• Patented phosphorus replacement technology to help extend the life of your emission system
• 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
• 6x better wear protection (as measured in latest sequence iva engine test)
• 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
• Maximum Performance: Castrol EDGE High Mileage Engine Oil is designed to provide maximum performance for high mileage cars that often operate at extreme temperatures.
• Improved High Temperature Performance: With Fluid TITANIUM Technology, this engine oil provides up to 10X better high temperature performance than the latest industry standard, ensuring optimal protection and oil flow over the drive cycle.

Castrol® EDGE® Extended Performance is Castrol’s most advanced full synthetic motor oil. It provides ultimate performance and the strength to enable an extended drain of 20,000 miles or a full year (whichever comes first).

Product Features:

• Approved and Licensed Specifications include: API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, ACEA C5, MB 229.71, Ford WSS-M2C962-A1, Fiat 9.55535-CR1, Fiat 9.55535-GSX
• 10X Better High Temperature Performance (Seq IIIH test vs. API SP limit)
• 6X Better Wear Protection (Based on Seq IVA vs. latest test limit)