2008 Mitsubishi Lancer Cooling and Climate Controls

Name: Heater Core
Brand: Carquest Premium
SKU: 910607
Price: 125.99 USD

Below you will find various in-demand Mitsubishi Cooling and Climate Controls, components and accessories for your 2008 Lancer. Advance Auto Parts has popular Lancer parts like Blower Motor and Related Products, Engine Cooling Parts, Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Lancer model years including 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and more. Select a category of 2008 Mitsubishi Lancer Cooling and Climate Controls below and start saving instantly.

Popular 2008 Mitsubishi Lancer Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

Blower Motors

Engine Cooling Fan Controllers

Radiator Caps

AC Compressor Without Clutch

Coolant Temperature Sensors

AC Condenser and Receiver Drier Assemblies

Heater Cores

Cabin Air Temperature Sensors

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Engine Coolant Pipe O-Rings

Blower Motor Resistors

AC Condensers

AC Line O-Rings

AC Compressor Cut-Out Relays

AC Caps and Valve Core Kits

Thermostat Housing Gaskets

Accumulator and Receiver Driers

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

AC O-Ring and Gasket Kits

Water Pump Gaskets

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Support Tie Bars

AC Refrigerant Pressure Sensors

Engine Coolant Thermostat Case Gaskets

Radiator Cap Adapters

AC System Seal Kits

HVAC Pressure Transducers

Essential Cooling and Climate Controls for 2008 Mitsubishi Lancers

from

$125.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$38.20

NTC offers a full line of thermostats to replace your original equipment thermostat. This includes a wide variety of temperature ranges all designed to operate within OEM specifications.

Product Features:

Strict quality control, and functional testing
Self-cleaning and self-aligning thermostat valve
Original equipment design provides exact fit and performance
Precise sealing edges reduce leakage and premature cooling
Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
Stainless steel assembly and springs are engineered for long life

from

$17.79

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$22.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$173.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$60.99

New Standard Replacement Radiator Support Upper Tie Bar, Without Turbo

Product Features:

Without Turbo, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$11.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$224.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$24.99

New Standard Replacement A/C System Seal Kit, MT2610, L4 Engine

Product Features:

MT2610, L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$2.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$79.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$65.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$46.05

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$33.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$10.99

New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:

MT2909
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$29.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$65.58

A/C Pressure Switch

from

$82.99

New Platinum Pro A/C Condenser, 2.0/2.4/3.0 Liter Engines

Product Features:

2.0/2.4/3.0 Liter Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$236.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$31.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$146.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$51.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$355.99

Carquest Standard Remanufactured Compressors are manufactured to meet original equipment specifications. All components are either remanufactured to strict standards or are replaced with new components to ensure performance and durability. All compressors are 100% end of line tested.

Product Features:

O-Rings and gaskets necessary for installation are included.
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$5.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$21.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$204.99

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

Upgrade your 2008 Mitsubishi Lancer with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2008 Mitsubishi Lancer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mitsubishi or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Lancer functioning at its best. At Advance Auto Parts, we offer a wide selection of 69 Cooling and Climate Controls for the 2008 Mitsubishi Lancer, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Engine Cooling Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2008 Mitsubishi Lancer at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $3.79 to $609.99, with an average price of $87.77. Our 69 Cooling and Climate Controls in stock come from 19 trusted brands, so you’re sure to find the right part for your 2008 Mitsubishi Lancer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Mitsubishi Lancer, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Imperial, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Imperial also bring quality to the table, with Cooling and Climate Controls available starting at $13.99, and at an average 4 stars rating. With 3,556 customer reviews and counting, our 2008 Mitsubishi Lancer Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Mitsubishi Lancer is always ready to roll. We’re committed to providing you with everything you need to keep your Lancer in top shape, all in one place. Start shopping confidently below for your 2008 Mitsubishi Lancer!

Best-Selling Blower Motor and Related Products for 2008 Mitsubishi Lancers

Enhance the driving experience in your Mitsubishi with 4 quality Blower Motor and Related Product components, starting at $79.99.

show more show less

from

$79.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$80.99

Blower motor resistor fail? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment.

Product Features:

Restores Functionality – Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$91.80

Blower Mtr Resistor

from

$101.17

The Original Equipment Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function. The Original Equipment Blower Motor Resistor is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

Excellent electrical and thermal performance
Direct OE replacement
Built to strict quality control standards
100% tested

Most Popular 2008 Mitsubishi Lancer Engine Cooling Parts

Customize your Mitsubishi with 42 Engine Cooling Parts products like Thermostats, Radiators, and Water Pumps, all priced under $241.99.

show more show less

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$204.99

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$13.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$18.79

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$188.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$21.99

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$15.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$74.99

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$156.99

New Platinum Pro Radiator Fan Assembly, Excludes Evolution

Product Features:

Excludes Evolution, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$3.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$23.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$241.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$106.99

New Platinum Pro Radiator, 2.0/2.4/3.0 Liter Engines [Reuse Original Core-Mounted Sensor If Required]

Product Features:

2.0/2.4/3.0 Liter Engines [Reuse Original Core-Mounted Sensor If Required], Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$24.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$9.49

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$124.99

New Platinum Pro Radiator, 3.0 Liter V6 Engine

Product Features:

3.0 Liter V6 Engine, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$208.23

Plastic Tank / Aluminum Core Radiator Koyo radiators are available in plastic tank and aluminum core. The Nocolok brazing line keeps the highest quality standards, bringing you superior products you can rely on. The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.

Product Features:

All Aluminum Core and Plastic Tank
OE Style mounting brackets and hose connections
Integrated transmission oil cooler when applicable
Compact and lightweight

from

$86.25

The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
Advanced technological design.
Carbon ceramic sealing.
Resistant to corrosion.
Optimum cooling performance and longevity.

from

$17.79

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$47.04

Dorman’s Engine Coolant Recovery Tank is designed for enduring use. It resists the expansion and cracking that extreme temperature fluctuations can cause. Plus, the durable plastic construction prevents coolant fluid loss.

Product Features:

Comes with reservoir cap
Level sensor included (where applicable)
Direct replacement for a proper fit every time
Quality tested to ensure trouble-free installation and performance

from

$28.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$51.99

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$11.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$125.99

Trimline Straight Blade Electric Fan

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$60.99

New Standard Replacement Radiator Support Upper Tie Bar, Without Turbo

Product Features:

Without Turbo, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$23.40

THERMOSTAT

from

$22.99

This radiator cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this radiator cap is designed to match the fit and function of the original cap on specified vehicles.
Restores functionality – reliable replacement for an original cap that is missing, leaking or failed due to gasket fatigue and heat
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.68

Water Outlet Gasket

from

$11.04

Radiator Cap

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$6.28

NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.

from

$5.73

Dorman offers a variety of Engine Coolant Recovery Tank Caps for a range of applications. All Dorman Engine Coolant Recovery Tank Caps are constructed of high-quality plastic. They effectively protect the cooling system by providing a tight seal against the elements.

Product Features:

Save time, money and labor by replacing only the Cap – instead of the entire Engine Coolant Recovery Tank
Direct replacement for a proper fit every time
A necessary safety item – prevents coolant from splashing and/or leaking
Available in diverse styles, including screw-on and snap-on

Top Picks for 2008 Mitsubishi Lancer Air Conditioning Parts

Upgrade Mitsubishi Lancers with top-quality Air Conditioning Parts parts, including 20 OEM and aftermarket selections for your 2008 model.

show more show less

from

$17.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$25.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$10.99

New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:

MT2909
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$242.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$82.99

New Platinum Pro A/C Condenser, 2.0/2.4/3.0 Liter Engines

Product Features:

2.0/2.4/3.0 Liter Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$31.49

from

$352.99

O-Rings and gaskets necessary for installation are included.
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$265.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$65.58

A/C Pressure Switch

from

$29.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$33.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$609.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$375.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$352.99

O-Rings and gaskets necessary for installation are included.
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$222.13

The VEMO OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment. Developed for the anti-block braking system, wheel speed sensors send information to many on-board electronic systems. The rotational speed of the wheels is transmitted from the sensor to the control unit and from there to the transmission, engine, navigation and chassis control systems. This data is essential for ABS, ASR and ESP, to prevent blocking or wheel spin. Due to their versatile use, the sensors make a direct contribution to driving dynamics and safety. Moreover, driving comfort can be improved, fuel consumption reduced and emission levels decreased. Failure of the wheel speed sensors means an acute safety risk! The cause may be electrical or mechanical disruption, for example increased wheel bearing play, a broken wire or a corroded plug contact. With more than 670 different wheel speed sensors for vehicles of all the leading manufacturers, the quality brand VEMO offers a high-quality alternative.

Product Features:

OE quality direct fit application
Manufactured to meet or exceed OE requirements and testing
Fuel consumption reduced and emission levels decreased
Protects electronics from static discharge.
Protects electronics against moisture.
Superior filtering function of oxygen.

from

$53.33

A/C Expansion Valve

from

$48.48

A/C Receiver Drier

from

$24.99

New Standard Replacement A/C System Seal Kit, MT2610, L4 Engine

Product Features:

MT2610, L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$18.02

A/C Receiver Drier

In-Demand HVAC Electrical Parts for 2008 Mitsubishi Lancers

Select from 1 premium HVAC Electrical Parts parts for your 2008 Mitsubishi Lancer.

show more show less

from

$43.99

Most Sold 2008 Mitsubishi Lancer Heating Parts

Explore our best-selling Mitsubishi parts for the 2008 Lancer among 2 OEM and aftermarket options starting from $46.05.

show more show less

from

$125.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$46.05

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

Top-Rated Cooling and Climate Controls Brands For Your 2008 Mitsubishi Lancer

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2008 Mitsubishi Lancers. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Imperial, and more. Cooling and Climate Controls from these brands that fit a 2008 Lancer start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2008 Mitsubishi Lancer Cooling and Climate Controls

When it comes to maintaining or upgrading your 2008 Mitsubishi Lancer, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2008 Mitsubishi Lancer. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Popular Carquest Premium 2008 Mitsubishi Lancer Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2008 Mitsubishi Lancer owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2008 Lancer, Advance Auto Parts carries a full inventory of 23 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Mitsubishi in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $13.99 to $609.99, plus, with more than 255 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$23.99

This product is not rated

Coolant Temperature Sensor with Thread Sealant

“”

from
$241.99

This product is not rated

Radiator

“”

from
$242.99

This product is not rated

A/C Condenser and Receiver Drier Assembly

“”

FAQs for 2008 Mitsubishi Lancer Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2008 Mitsubishi Lancers?

Out of 69 Cooling and Climate Controls that fit 2008 Mitsubishi Lancers, the following parts are the top sellers:

Radiator Cap: 16 PSI (17110021) – $13.99
Cap & Valve A/C System Seal Kit (15890310) – $17.99
Adjustable Thermostatic Fan Control (6016936) – $22.99

What’s the price range for 2008 Mitsubishi Lancer Cooling and Climate Controls?

Cooling and Climate Control prices for the 2008 Mitsubishi Lancer start at $3.79 and go up to $609.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2008 Mitsubishi Lancer?

The average price for Cooling and Climate Controls for the 2008 Mitsubishi Lancer is $87.77. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Mitsubishi Lancer model years?

Yes, we currently carry Cooling and Climate Controls for 15 model years of Mitsubishi Lancers between 2002 and 2017. Cooling and Climate Controls are bought most frequently for the following model years: 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, and 2009.

What are the cheapest Cooling and Climate Controls for my 2008 Mitsubishi Lancer?

The cheapest 2008 Mitsubishi Lancer Cooling and Climate Controls we carry in stock are:

Engine Water Pump Gasket (20780157) – $3.79
Expansion Tank Cap (11895436) – $5.73
Heater Pipe O-Ring (10793037) – $6.28
Engine Coolant Outlet Gasket (10081715) – $6.49
Engine Coolant Thermostat Housing Gasket (10018029) – $6.79

What are the top-rated Cooling and Climate Controls that fit the 2008 Mitsubishi Lancer?

Out of 3,556 reviews by customers, our 2008 Mitsubishi Lancer Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2008 Mitsubishi Lancer and their top-rated products:

Blower Motor and Related Products
- Blower Motor: With Wheel (10239356) – $79.99
Engine Cooling Parts
- Blower Motor: With Wheel (10239356) – $79.99

What types of Cooling and Climate Controls do you sell for my 2008 Mitsubishi Lancer?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2008 Mitsubishi Lancer:

Can I get help with 2008 Mitsubishi Lancer Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mitsubishi Cooling and Climate Controls and more.

What is your return policy for Mitsubishi Lancer Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Mitsubishi Lancer Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Mitsubishi Lancer Cooling and Climate Controls

Carquest Premium – Heater Core (Part No.910607)

NTC – Thermostat (Part No.G4000168030NTC)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26764)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432484)

KAI – Radiator Support Tie Bar (Part No.MI1225143)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35865)

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-333)

KAI – A/C System Seal Kit (Part No.FTT010065)

Victor Reinz – Engine Coolant Outlet O-Ring (Part No.41-76662-10)

Carquest Premium – Blower Motor: With Wheel (Part No.75848)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC2199)

Factory Air – System Mounted Pressure Transducer (Part No.37332)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39290)

KAI – A/C Service Valve (Part No.FTT010751)

Carquest Premium – AC Pressure Sensor (Part No.ACA1749)

Santech – A/C Pressure Switch (Part No.R1054278584SII)

KAI – A/C Condenser (Part No.CND3747)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC2536)

Carquest Premium – Multi Purpose Relay (Part No.RAA1737)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2246)

Dorman – Non-Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-234)

Carquest Standard – A/C Remanufactured; w/ Clutch; w/ MSC105C Compressor (Part No.DW77494)

Felpro – Engine Water Pump Gasket (Part No.35737)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.621-368)

Carquest Premium – Blower Motor: With Wheel (Part No.75848)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1112)

Autopart International Inc – Blower Mtr Resistor (Part No.R20321957784API)

Original Equipment – Blower Motor Resistor (Part No.R2032861700OEA)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.621-368)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)

Carquest Premium – Standard Thermostat: With Seal, 180 Degrees (Part No.14719)

Carquest Premium – Radiator (Part No.812979)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)

Carquest Premium – Thermostat-170 Degrees w/ Seal (Part No.14047)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1219)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

KAI – Cooling Fan Assembly (Part No.MI3115139)

Felpro – Engine Water Pump Gasket (Part No.35813)

Carquest Premium – Coolant Temperature Sensor with Thread Sealant (Part No.WTC1048)

Carquest Premium – Radiator (Part No.812978)

KAI – Radiator (Part No.RAD2979)

NTK – Engine Coolant Temperature Sensor (Part No.EF0097)

Dorman – Help – Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack (Part No.54242)

KAI – Radiator (Part No.RAD2978)

Koyo Cooling – Radiator (Part No.G1000332625KCS)

AISIN – OE Replacement Water Pump (Part No.G3000181173ASC)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)

Dorman – Coolant Reservoir – Expansion Tank (Part No.G1030332875DOR)

Carquest Premium – Engine Coolant Temperature Sensor (Part No.ACA1574)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35877)

Dorman – Non-Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-234)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35865)

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.114)

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

KAI – Radiator Support Tie Bar (Part No.MI1225143)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Worldpac – THERMOSTAT (Part No.G40004147308NTC)

Dorman – Help – Radiator Cap (Part No.54237)

Mahle – Water Outlet Gasket (Part No.G3045476867MAH)

Autopart International Inc – Radiator Cap (Part No.G10101995143API)

Felpro – Engine Coolant Outlet Gasket (Part No.35926)

Nippon Reinz – Heater Pipe O-Ring (Part No.G3077337831NRZ)

Dorman – Expansion Tank Cap (Part No.G1040751966DOR)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83132)

KAI – A/C Service Valve (Part No.FTT010751)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26764)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.3212)