2008 Mercedes-Benz GL320 Brake Parts

Essential 2008 Mercedes-Benz GL320 Brake Parts

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5089)

Disc Brake Caliper Guide Pin Kit

from

$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
  • Helps deliver a quieter, more efficient braking system
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH200529)

Disc Brake Rotor Meets or Exceeds OE Design

from

$102.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Febi – Parking Brake Hardware Kit (Part No.N5005376163FEB)

Parking Brake Hardware Kit

from

$19.65
Parking Brake Hardware Kit

Elring – Oil Drain Plug Gasket (Part No.A612044453ELR)

Oil Drain Plug Gasket

from

$1.21
Oil Drain Plug Gasket

PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-1122)

Z17 Low-Dust Ceramic Brake Pads with Hardware

from

$53.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium hardware for easy installation
See More

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2298)

Multi-Purpose Wire Connector with Leads

from

$37.99
ACDelco Professional Cornering Light Socket is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket socket is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

PowerStop – Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z26 Street Performance (Part No.K6708-26)

Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z26 Street Performance

from

$281.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. This PowerStop Z26 Street Warrior Brake Upgrade Kit is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.

Product Features:
  • This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
  • Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
  • Stainless-steel pad shims resist the increased temperatures common on high performance applications
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Drilled & Slotted performance rotors provide maximum cooling
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
  • Rotors are zinc plated for maximum protection against rust.
  • Includes 1 Rear Sensor Wire
  • Buy with confidence from the originator & industry leader of brake kits
See More

ATE – ATE Brake Master Cylinder (Part No.N3000294363ATE)

ATE Brake Master Cylinder

from

$231.33
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

Febi – Bilstein Brake Disc Set Screw (Part No.N1004140486FEB)

Bilstein Brake Disc Set Screw

from

$2.98
The Febi/Bilstein Brake Disc Set Screw is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B3256B)

Semi Loaded Disc Brake Caliper with Bracket

from

$85.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

ATE – Anti Rattle Spring / Clip (Part No.N1069225490ATE)

Anti Rattle Spring / Clip

from

$17.84
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1527)

Brake Pad Wear Sensor

from

$15.79
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:
  • Triggers a warning light on the dashboard
  • Should be replaced each time the brake pad is replaced
  • Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH200530)

Disc Brake Rotor Meets or Exceeds OE Design

from

$144.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

ATE – Diaphram Position Se (Part No.N4040148169ATE)

Diaphram Position Se

from

$61.61
Diaphram Position Se

Carquest Premium – Brake Fluid Pressure Sensor (Part No.BBA1015)

Brake Fluid Pressure Sensor

from

$87.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8238A)

Disc Brake Caliper Guide Pin Boot Kit

from

$34.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Prevents noise and premature wear
See More

ATE – Anti Rattle Spring / Clip (Part No.N1069225494ATE)

Anti Rattle Spring / Clip

from

$9.64
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Akebono Euro – Ceramic Brake Pads Ultra-Premium (Part No.EUR1123)

Ceramic Brake Pads Ultra-Premium

from

$99.99
Product Features:
  • Made in the USA
  • OE Manufacturer
  • Ceramic Brake Pad
  • Low Dust
  • Powerful Quiet Stopping
  • Ultra-Premium
  • Extremely Rotor-Friendly for Longer Rotor Life
See More

Carquest Standard – Brake Pads (Part No.MKD1272)

Brake Pads

from

$22.99
Wearever Silver brake pads are an economical choice for dependable stopping power and quiet braking.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
See More

Carquest Wearever – BRK HOSE 1 EA TRUTQ (Part No.BHA621187)

BRK HOSE 1 EA TRUTQ

from

$32.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
  • Brand may vary by location
See More

Corteco – Brake Hose (Part No.N70001097684CFW)

Brake Hose

from

$26.99
Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:
  • High durability
  • Low volume expansion
  • 100% high pressure tested and certified quality
See More

Economy Black – Disc Brake Caliper Repair Kit (Part No.15271)

Disc Brake Caliper Repair Kit

from

$4.99
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B3245)

Semi Loaded Disc Brake Caliper with Bracket

from

$112.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B3315)

Semi Loaded Disc Brake Caliper with Bracket

from

$71.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Carquest Wearever – Parking Brake Shoes (Part No.S870)

Parking Brake Shoes

from

$43.49
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

2008 Mercedes-Benz GL320 Brake Parts

You count on your 2008 Mercedes-Benz GL320 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 57 Brake Parts ranging in price from $1.21 to $619.99, you’re sure to find everything you need for your 2008 Mercedes-Benz GL320.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 14 different brands like Carquest, Cardone, and Carquest Professional. 2008 Mercedes-Benz GL320 Brake Parts start as low as $1.21!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 112 extensive product reviews on 2008 Mercedes-Benz GL320 Brake Parts. Some of the top-rated Brake Parts products we carry are Semi-Metallic Brake Pads – (4-Pad Set) with 4.3 stars and Ceramic Brake Pads Ultra-Premium with 4.5 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2008 Mercedes-Benz GL320 below to get started!

Top-Rated Brake Parts Brands For Your 2008 Mercedes-Benz GL320

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Mercedes-Benz GL320 running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Carquest Professional, and even more.

Popular Carquest Professional Platinum Brake Parts

You’ll find popular Carquest Professional Platinum brand products across Brake Pads and Shoes. All are waiting to get your 2008 Mercedes-Benz GL320 back on the road. Some of the top-rated Carquest Professional Platinum products in these categories are:
Brake Pads With Hardware, Semi-Metallic, Longer Life, Quiet
from $73.99
(12)
Brake Pads With Hardware, Semi-Metallic, Longer Life, Quiet
Front Brake Pads and Shoes
Brake Pads With Hardware, Semi-Metallic, Longer Life, Quiet
from $61.99
(6)
Brake Pads With Hardware, Semi-Metallic, Longer Life, Quiet
Rear Brake Pads and Shoes

FAQs for 2008 Mercedes-Benz GL320 Brake Parts

What are the most purchased Brake Parts for the 2008 Mercedes-Benz GL320?

Out of 57 Brake Parts for the 2008 Mercedes-Benz GL320, the most popular in our inventory are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders
Disc Brake Caliper Guide Pin Boot Kit
from $15.29
(2)
Disc Brake Caliper Guide Pin Boot Kit
Brake Caliper Guide Pin Boot Kits
Ceramic Brake Pads - Front (4-Pad Set)
from $63.99
(10)
Ceramic Brake Pads – Front (4-Pad Set)
Front Brake Pads and Shoes

What are the top-rated 2008 Mercedes-Benz GL320 Brake Parts?

Top-rated Brake Parts for your 2008 Mercedes-Benz GL320 based on customer reviews/ratings are:
Semi-Metallic Brake Pads - (4-Pad Set)
from $49.49
(6)
Semi-Metallic Brake Pads – (4-Pad Set)
“Excelente producto”
Ceramic Brake Pads Ultra-Premium
from $99.99
(4)
Ceramic Brake Pads Ultra-Premium
“excellent pads and quiet”
ThermoQuiet Semi-Metallic Disc Brake Pad Set
from $35.00
(4)
ThermoQuiet Semi-Metallic Disc Brake Pad Set
“Installed in an ML-350. They have performed perfectly. No noise and at least at parity with the OEM material. Price is what I would expect for a qu”