2008 Lincoln Town Car Drivetrains

Essential 2008 Lincoln Town Car Drivetrains

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Pinion Install Kit For Ford 8.8" Differential (Part No.13041)

Pinion Install Kit For Ford 8.8" Differential

from

$167.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 2009 and down Ford 8.8″
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" In A 5.13 Ratio (Part No.24100)

High Performance Ring & Pinion Gear Set For Ford 8.8" In A 5.13 Ratio

from

$459.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. A notched cross pin shaft is required for this gear set.

Product Features:
  • Fits standard rotation Ford 8.8″
  • 8.80″ ring gear diameter
  • 30 spline pinion
  • 10 ring gear bolts
  • 5.13 ratio
See More

Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)

Cover Bolt For Ford 7.5", 8.8" & 9.75"

from

$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.

Product Features:
  • 35 spline
  • 8 x 3.96″ bolt pattern
  • Cut to length design fits 40″-43.5″ applications
  • Fits Dana Spicer 60, 70 and 80
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802011)

Tapered Roller Bearing

from

$10.49
Product Features:
  • Brand may vary by location
See More

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-507)

Differential Yoke including Seal and Pinion Nut

from

$48.99
A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.

Product Features:
  • Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles
  • Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33300)

Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

from

$11.99
Side gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:
  • Side gear thrust washer for Ford 8.8″
  • 0.875″ diameter cross pin shaft applications only
See More

Yukon Gear – Trao Loc Spring For Ford 8.8", 31 Spline (Part No.33516)

Trao Loc Spring For Ford 8.8", 31 Spline

from

$99.99
Product Features:
  • Trac Loc spring for Ford 8.8″
  • 31 spline applications only
See More

Pro-King – Differential Pinion Shim Kit (Part No.742G200A)

Differential Pinion Shim Kit

from

$18.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Bearing Race Driver (Part No.56020)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M802011 race
  • All steel construction
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1043-1)

RngPnnInstlKt

from

$182.99
RngPnnInstlKt

Driveworks – Axle Repair Bearing (Part No.S-RP-5707)

Axle Repair Bearing

from

$16.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – 8.8" Ford Cover Gasket (Part No.23011)

8.8" Ford Cover Gasket

from

$12.99
8.8″ Ford cover gasket.

Product Features:
  • Cover gasket
  • Fits Ford 8.8″
See More

USA Standard Gear – Standard Spider Gear Set For Ford 8.8", 28 Spline (Part No.39015)

Standard Spider Gear Set For Ford 8.8", 28 Spline

from

$209.99
Product Features:
  • Spider gear kit
  • Fits Ford 8.8″ 28 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Trac Loc Positraction, Ford 8.8", 31 Spline (Part No.20069)

Trac Loc Positraction, Ford 8.8", 31 Spline

from

$719.99
Product Features:
  • Trac Loc positraction
  • Fits Ford 8.8″ with 31 spline axles
See More

Dorman – Differential Clutch Kit (Part No.697-780)

Differential Clutch Kit

from

$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
  • Quality materials – all components are built for reliable longevity and performance
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

National – Shaft Repair Sleeve (Part No.99187)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Ford 7.5", 8", 8.8", & 9" Axle Stud (Part No.33175)

Ford 7.5", 8", 8.8", & 9" Axle Stud

from

$6.99
Ford 7.5″, 8″, 8.8″, & 9″ axle stud.

Product Features:
  • Axle stud for Ford 7.5″, 8.8″ and 9″
  • 1/2″ x 20 thread
  • 1 7/8″ long
  • 29/64″ shoulder length
See More

Powertrax – Lock Right Locker (Part No.1822-LR)

Lock Right Locker

from

$371.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    National – Bearings (Part No.M802011)

    Bearings

    from

    $14.79
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    ARP Auto Racing – For Use With Ford 8.8 And 9" Using 3/4"Socket, 0.75"L Under Head, 7/16"-20 (Part No.250-3003)

    For Use With Ford 8.8 And 9" Using 3/4"Socket, 0.75"L Under Head, 7/16"-20

    from

    $34.99
    The tremendous shock loads generated at launch by most any drag racing vehicle equipped with today sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. they are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

    Product Features:
    • Forged From Premium Grade 8740 Chrome Moly Steel
    • Heat Treated
    • Nominally Rated At 200,000 Psi Tensile Strength
    • Specially Hardened, Precision Ground Washers
    • 0.75″ Underhead Length
    • 200,000 PSI
    • Sold As A Set
    See More

    Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

    Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

    from

    $8.99
    Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

    Product Features:
    • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
    See More

    NTN – Axle Shaft Bearing (Part No.K4010212752NTN)

    Axle Shaft Bearing

    from

    $42.90
    Axle Shaft Bearing

    Motive Gear – Differential Mini Spool (Part No.MS88-31)

    Differential Mini Spool

    from

    $101.99


    Product Features:
    • MINI SPOOL 8.8 FORD 31SPL
    See More

    Yukon Gear – Mini Spool For Ford 8.8" With 31 Spline Axles (Part No.32226)

    Mini Spool For Ford 8.8" With 31 Spline Axles

    from

    $194.99
    Mini Spool for Ford 8.8″ with 31 spline axles and 7/8″ cross pin. Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Ford 8.8″ with 31 spline axles
    • Provides 100% traction to both wheels at all times
    • Installs into standard open carrier case
    See More

    Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

    14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

    from

    $404.99
    Product Features:
    • Clutch kit
    • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
    • 14 piece kit
    • Carbon fiber clutches
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-532)

    Differential Pinion Yoke Assembly

    from

    $176.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Popular 2008 Lincoln Town Car Drivetrains Categories

    2008 Lincoln Town Car Drivetrains

    You count on your 2008 Lincoln Town Car to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 233 Drivetrains ranging in price from $0.99 to $2,122.99, you’re sure to find everything you need for your 2008 Lincoln Town Car.

    Brands matter. If you want to shop a specific Drivetrains brand, we stock 23 different brands like Valvoline, Moog, and Driveworks. 2008 Lincoln Town Car Drivetrains start as low as $0.99!

    One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 8,196 extensive product reviews on 2008 Lincoln Town Car Drivetrains. Some of the top-rated Drivetrains products we carry are Oil Seal with 4.8 stars and Greaseable Premium Universal Joint with 4.0 stars.

    Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2008 Lincoln Town Car below to get started!

    Top-Rated Drivetrains Brands For Your 2008 Lincoln Town Car

    Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Lincoln Town Car running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

    Popular Valvoline Drivetrains

    You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2008 Lincoln Town Car back on the road. Some of the top-rated Valvoline products in these categories are:
    ATF for Mercon®V Applications Conventional, 1 Quart
    from $12.99
    (120)
    ATF for Mercon®V Applications Conventional, 1 Quart
    Differential Oil

    FAQs for 2008 Lincoln Town Car Drivetrains

    What are the most purchased Drivetrains for the 2008 Lincoln Town Car?

    Out of 233 Drivetrains for the 2008 Lincoln Town Car, the most popular in our inventory are:
    Differential Cover Gasket
    from $14.99
    (121)
    Differential Cover Gasket
    Rear Housing Cover Gaskets
    Greaseable Super Strength Universal Joint
    from $36.99
    (41)
    Greaseable Super Strength Universal Joint
    U-Joints
    Universal Joint
    from $15.99
    (28)
    Universal Joint
    U-Joints

    What are the top-rated 2008 Lincoln Town Car Drivetrains?

    Top-rated Drivetrains for your 2008 Lincoln Town Car based on customer reviews/ratings are:
    Oil Seal
    from $5.49
    (38)
    Oil Seal
    “Exact fit , price was good”
    Greaseable Premium Universal Joint
    from $19.99
    (31)
    Greaseable Premium Universal Joint
    “Greaseable with life time warranty”
    Multi Purpose Seal
    from $11.99
    (28)
    Multi Purpose Seal
    “Stopped the leak”