2008 Jeep Wrangler Body Parts

Name: Steel Tube Fender Flares; F/R Set; 07-18 Wrangler JK
Brand: Rugged Ridge
SKU: 11615.48
Price: 1077.99 USD

Below you will find various in-demand Jeep Body Parts, components and accessories for your 2008 Wrangler. Advance Auto Parts has popular Wrangler parts like Vehicle Doors, Vehicle Windows, Bodies and Fender Parts and more. You’ll also find aftermarket and OEM Body Parts for other Wrangler model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2008 Jeep Wrangler Body Parts below and start saving instantly.

Popular 2008 Jeep Wrangler Body Parts Categories

Grille and Brush Guards

Spare Tire Carrier Mounts

Running Boards and Steps

Bumper to Body Filler Panels

Grilles

Bumper Cover Moldings

Tonneau Covers

Door Lock Motors

Bumper Guards

Side Bars and Sideskirts

Wheel Trim Rings

Windshield and Hardware

Spare Tire Brackets

Door Latches

Fender Molding Retainers

Bumper D-Rings

Tailgate Latch Assemblies

Hood Latches

Hood Panels

Hood Latch Assemblies

Fender Liner Retainers

Tailgate Rubber Stops

Power Window Switches

Door Lock Cylinders

Tailgates

Door Lock Clips

Exterior Door Handles

Step Nerf Bar Mount Kits

Hard Top Release Bushings

Splash Guard (Mud Flap)

Soft Top Storage Boots

Outside Mirror Covers

Bumper Impact Bars

Rocker Panel Molding Retainers

Interior Door Pull Handles

Windshield Frame Weatherstrip Seals

Soft Top Wind Screens

Bumper Pad Retainer Strips

Fender Splash Shields

Mirror Replacement Glass

Exterior Door Handle Covers

Truck Cab Storage Cases

Interior Rear View Mirror Mounting Bases

Weatherstrip Fasteners

Bumper Corners

Tailgate Hinge Covers

Bumper Pad Clips

Fender Extension Panels

Fender Flare Hardware Kits

Door Mirror Bracket Covers

Rocker Panel Guards

Body Trim Accessory Kits

Hard Doors

Body Corner Guards

Fender Support Brackets

Spare Tire Carrier Hinges

Door Jamb Switch Connector

Body B-Pillar Moldings

Spare Tire Relocation Kits

Bumper Corner Sets

Cowl Panel Grills

Hood Seals

Spare Tire Carrier Delete Plates

Fender Flare Clips

Door Hinge Covers

Door Glass

Door Mirror Trim Rings

Windshield Tie Down Bar

Tailgate Stop Bumper Retainer

Bumper Valance and Grille Kit

Essential Body Parts for 2008 Jeep Wranglers

from

$1077.99

Steel Tube Fender Flares; F/R Set; 07-18 Wrangler JK

from

$596.99

Westin Snyper Triple Tube Rock Rails are frame mounted Jeep(R) side steps that protect vehicle rocker panels. Made of three 16 gauge welded tube construction. Full-length step area features louvered styling and a texture coated finish for slip resistance and easy cleaning. A welded plate that features a laser cut Snyper logo is welded between the 2 inch upper and lower tubes to provide added support. Available for 2 door and 4 door Jeep(R) Wrangler in textured black finish.

Product Features:

Protect Rocker Panels From Damage
Made Of 16 Gauge Steel
2 In. Diameter .120 In. Thick Wall Tube
Mount Directly To Vehicle Frame
Full-Length Step Area Features Louvered Styling
Slip-Resistant Texture Coated Step Area
Welded Support Plate With Laser-Cut Snyper Logo
Available For 2 Door And 4 Door Jeep Wrangler
Bolt On; No Drill Installation

from

$307.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$445.99

New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar

Product Features:

Made Of High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$11.79

Hardtop Nut with Cli

from

$64.99

Never miss a moment of trail action again! This patent pending Rugged Ridge Dash Multi-Mount System is the most versatile dashboard accessory mounting system available. Featuring a universal ball mount for driver info gadgets.

Product Features:

Black
Includes Both Tripod and Ball Socket
Storage Space
Mounts w/ Factory Screws and Snaps Into The Dash
Mount a Phone GPS Camera or Radar Detector

from

$258.99

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

Rocker Panel Mount
T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
Provides Moderate Protection Against Road Hazards And Debris

from

$91.99

Laser Measured MudFlaps are custom fit and protect your vehicle s fenders and exterior from rocks, mud, road grime and other debris picked up by your vehicle s wheels. No drilling required and installs in Minutes.

Product Features:

Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
MudFlap Will Offers Undeniable Vehicle Protection
Features The Patented QuickTurn Hardened Stainless Steel Fastening System
Provides Protection For Your Vehicles Most Vulnerable Areas Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
Laser Measured For A Perfect Fit Set Literally Mounts In Minutes (In Most Applications) Without The Need For Wheel Or Tire Removal
Most Importantly Mounts Without The Need For Drilling Into The Vehicles Fragile Painted Metal Surface

from

$381.99

New Standard Replacement Spare Tire Bracket, Includes High Mount Stop Lamp

Product Features:

Includes High Mount Stop Lamp, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$17.49

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Rubber
OE Style
Direct Fit
Keeps Out The Rain And The Cold

from

$123.99

Tonneau Cover; 07-18 Jeep Wrangler JKU; 4 Door

from

$18.29

This door hinge screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this door hinge screw matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$56.99

Product Features:

Limited 12 Month Warranty Or Limited 12,000 Mile Warranty

from

$151.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$33.99

HOOD HINGE

from

$139.99

This complete eight piece hood kit from Rugged Ridge includes all necessary mounting hardware. Constructed of prime 304 stainless steel that has been polished to a mirror finish, these accessories are built to last. 304 stainless steel is virtually rust proof.

Product Features:

Stainless Steel
8 Piece Kit
Includes Hardware

from

$224.99

New Standard Replacement Front Bumper Cover Molding [Applique] Prime/Paint To Match Finish

Product Features:

Made Of Olefinic Thermoplastic Elastomer
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$50.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$138.99

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

from

$5.79

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

Black
OE Style
Direct Fit
Secures Fender
Limited 5 Year Warranty

from

$7.29

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$466.99

4-Inch Oval Side Ste

from

$42.99

DoorCheckStrap

from

$8.79

Push Pin Fastener; G

from

$173.99

Door latches are included with half doors and tube doors, but are available separately for custom applications.

Product Features:

For Half And Tube Doors
Pair

from

$34.99

New Standard Replacement Passenger Side Rear Bumper End

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$198.99

The XHD Aluminum Bumper System was designed for a whole new look while being extremely lightweight. The bumper is all aluminum but uses the current steel XHD D-rings and comes with a built in top filler plate.

Product Features:

Aluminum
Front

Upgrade your 2008 Jeep Wrangler with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2008 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Body Parts are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 428 Body Parts for the 2008 Jeep Wrangler, designed to meet your needs without breaking the bank. From Vehicle Door replacements to Vehicle Windows upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2008 Jeep Wrangler at great prices. Our Body Parts inventory for this model ranges from just $0.99 to $2,368.00, with an average price of $194.81. Our 428 Body Parts in stock come from 24 trusted brands, so you’re sure to find the right part for your 2008 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Jeep Wrangler, we stock popular OEM and aftermarket Body Parts from top names like StrongArm, Rugged Ridge, Dorman, and more. StrongArm Body Parts start at just $26.99 and boast an impressive 4.5 stars average rating from customers. Rugged Ridge and Dorman also bring quality to the table, with Body Parts available starting at $4.99, and at an average 4.3 stars rating. With 66 customer reviews and counting, our 2008 Jeep Wrangler Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 2008 Jeep Wrangler!

Best-Selling Vehicle Doors for 2008 Jeep Wranglers

Enhance the driving experience in your Jeep with 54 quality Vehicle Door components, starting at $3.99.

show more show less

from

$18.29

Direct replacement – this door hinge screw matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$151.99

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$15.99

Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$99.99

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$6.99

Plug; Door Shell; 99-17 TJ/JK/WJ/KJ

from

$63.99

Product Features:

Limited 12 Month Warranty Or Limited 12,000 Mile Warranty

from

$29.99

This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$105.99

Full Door Seal; Front; Right; 07-17 Jeep Wrangler JK

from

$105.99

Full Door Seal; Rear; Left; 4 Door; 07-17 Jeep Wrangler JKU

from

$60.99

All Terrain Entry Guard Kit; 07-18 Jeep Wrangler JK; 2 Door

from

$44.99

Product Features:

Limited 12 Month Warranty Or Limited 12,000 Mile Warranty

from

$315.99

Door Hinge Kit; 8 Piece; 07-18 Jeep Wrangler Unlimited JKU; 4 Door

from

$872.99

2-Piece Door Kits offer passenger and driver side upper and lower complete with Rotary or Paddle Handler kits. Compatible with Supertop, Sunrider, and Halftop. Snug fit is ensured by using adjustable lower door pins and door collars. Velcro to fasten upper and lower doors together. Double-bulb weather stripping surrounds the door to facilitate a good seal. Exterior fabric color matches Bestop and factory original soft tops. All Bestop Jeep doors are easily adjustable for a weather tight fit.

Product Features:

Weather-stripping Around Channel
Keeps Out The Elements
Compatible w/Supertop/Sunrider/Halftop
Adjustable To Ensure an Exact Fit
Rotary Latch Paddle Handles Close on Factory Doors
Door Strikers Provided for Standard Handles

from

$466.99

from

$463.99

ARIES Jeep tube doors are more than a fancy aftermarket toy for your Wrangler JK; they are the key to turning your ride into the ultimate off-roading machine. Their open-concept design and aggressive cutout pattern makes them the perfect accessory for the desert baja and the rock climber alike. To keep your Jeep JK light on its feet over every sand dune, ARIES Jeep tube doors are built to be lightweight while still maintaining superior strength. They are constructed from T6 aluminum alloy, making them strong but far lighter than steel. We also use 100% TIG welds to ensure a solid build and a precise fit on your vehicle. Jeep tube doors are quick to install and easy to remove whenever necessary, using the factory hinge points. They are coated in a durable black powder coat for maximum corrosion resistance, and the unique textured finish of the powder coat helps hide minor scratches and grime from your off-road excursions (NOTE: Before purchasing ARIES Jeep tube doors, it is recommended that you check local and state laws. Some laws may prohibit the use of this product).

Product Features:

Open design and aggressive cutout for ultimate offroad look and feel
Hardened T6 aluminum construction to be strong, lightweight and rust-free
Textured black powder coat easily hides minor scratches and grime
100% TIG welds for a precise fit
Simple installation using existing hinge points
Accepts factory mirrors (not compatible with power mirrors)

from

$459.99

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

Adjustable Hinge Brackets And Latch Assembly
Rubber Anti-rattle Bump Stops
Black Powder Coat Finish
Limiting Straps Included

from

$451.99

Open design and aggressive cutout for ultimate offroad look and feel
Hardened T6 aluminum construction to be strong, lightweight and rust-free
Textured black powder coat easily hides minor scratches and grime
100% TIG welds for a precise fit
Simple installation using existing hinge points
Accepts factory mirrors (not compatible with power mirrors)

from

$389.99

JEEP WRANGLER JK DOOR LOCK-DISPLAY PACK

from

$288.99

from

$245.99

from

$136.99

from

$114.99

from

$112.99

from

$105.99

Full Door Seal; Rear; Right; 4 Door; 07-17 Jeep Wrangler JKU

Most Popular 2008 Jeep Wrangler Vehicle Windows

Customize your Jeep with 11 Vehicle Windows products like Window Regulators and Window Trims, all priced under $187.99.

show more show less

from

$67.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$77.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$101.99

Looking for a summer top that is easy to install and remove? The Rugged Ridge Eclipse Sunshade gives the open air and top down feeling you want, while providing added protection from harsh sunlight.

Product Features:

Protects Passengers From the Sun
Works w/ Factory Top Still Attached
Simple Bungee Ball Attachments
Included Mesh Carry Bag

from

$77.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$187.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$174.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$114.99

Protects Passengers From the Sun
Works w/ Factory Top Still Attached
Simple Bungee Ball Attachments
Included Mesh Carry Bag

from

$82.99

AISIN Window Regulator Assemblies and Motors are mechanical and electrical components that work together to raise and lower the power windows in a vehicle. The window regulator assembly is the mechanical component that consists of gears, tracks and other parts that move the window up and down. The electric motor is the component that provides the power to move the window. Together, they form the power window system that allows the driver and passengers to easily raise and lower the windows with the push of a button.

Product Features:

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$75.99

Does your Jeep window not roll up and down anymore? Or even worse, it’s stuck somewhere in between. Omix-ADA offers high-quality replacements that will give you years of service. You won’t need clear plastic and duct tape.

Product Features:

Driver Front
Motor Not Included
OE Style
Direct Fit
Limited 5 Year Warranty

from

$66.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$60.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

Top Picks for 2008 Jeep Wrangler Bodies and Fender Parts

Upgrade Jeep Wranglers with top-quality Bodies and Fender Parts parts, including 143 OEM and aftermarket selections for your 2008 model.

show more show less

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$439.99

Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek OE style 5 step pad. Available in 4 lengths 53 7

Product Features:

Unique Style w/Tough Construction
Sleek Style And Finish
OE Style Look
UV Stable 5 in. Wide Step Pad
Stylized End Caps
Contoured Step Pad
Lifetime Warranty

from

$65.99

At ARIES, we know what it means to be a Jeep owner. We know that the sky is your roof, the rocky slopes are your bread and butter, and the mud in your tires is the blood pumping through your veins. Owning a Jeep means fueling up with more than just gasoline because it’s passion that drives you every time you turn the ignition. That same passion has been our inspiration for the ARIES line of Jeep products. From our modular bumpers and tube doors to our security cargo lid and fender flares, ARIES is your gateway to the ultimate off-roading experience. The ARIES Jeep tire relocation carrier is made with high-strength carbon steel and covered in a durable, dual-layer E-coat and black powder coat finish to resist scuffs, grime and rust. It offers reliable strength and easy installation (NOTE: Using aftermarket lug nuts may prevent proper torqueing of the spare tire to the carrier. Refer to the installation instructions for additional information and torque values).

Product Features:

Allows for a larger spare tire up to 35″ in diameter
Securely bolts onto existing rear door tire carrier
Maintains easy access to the rear cargo area
Brackets fortify tire relocation carrier to accept larger tires
Strong steel construction with a durable E-coat and black powder coat finish

from

$6.49

This black replacement T-style fender flare and rocker panel molding clip from Omix-ADA allows you to attach your factory fender flares to the sides of your Jeep. The clip is constructed of durable thermoplastic material and injection molded.

Product Features:

Black
OE Style
Direct Fit
Attach Your Fender Flares To Sides Of Your Jeep

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$54.99

New, Standard Replacement Driver Side Fender Flare Bracket

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Or Modifications Needed For Installation
Same Form Fit As OE

from

$13.99

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications are Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Foam Construction
Meets Quality Standards
Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
Easy To Install

from

$50.99

The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:

Classic Styling Of Brite-Tread Aluminum
Front Or Rear Wheel Protection
Radius Notch Contours To The Fender Well
Protected By A BriteGard Powder Coat Finish

from

$23.99

This jounce bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$14.99

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications Comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Foam Construction
Meets Quality Standards
Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
Easy To Install

from

$53.99

New, Standard Replacement Passenger Side Fender Flare Bracket

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Or Modifications Needed For Installation
Same Form Fit As OE

from

$157.99

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Jeep Wrangler (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

Unique bends to contour to the body of the vehicle
Custom, non-skid step pads for safe entry and exit
3″ diameter, heavy-wall tube design
High-strength carbon steel construction
Highly rust-resistant semi-gloss black powder coat and E-coat finish
No-drill, vehicle-specific application for a custom fit
Heavy-duty steel mounting brackets for a solid step

from

$23.49

Spare Tire Carrier Bump Stop; 07-17 Jeep Wrangler JK

from

$6.79

Plug; Floor; 6.3mm Hole; 84-99 Jeep Cherokee/Comanche

from

$381.99

New Standard Replacement Spare Tire Bracket, Includes High Mount Stop Lamp

Product Features:

Includes High Mount Stop Lamp, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$379.99

Stylish and durable, Westin’s Wrangler JK Rear Inner Fenders provide protection from rocks and debris. Designed to fit with Westin’s Rear Tube Fenders and made of 16 gauge steel. Sold in pairs and available in textured black finish. Hardware included for easy installation

Product Features:

Made Of 16 Gauge Steel
Mesh Covered Openings To Provide Engine Compartment Ventilation
Protection From Rocks And Debris
Designed To Fit With West ins Front Tube Fenders
Sold In Pairs
Textured Black Finish
Hardware Included
Bolt-On Installation; No Drilling Required

from

$338.99

Stylish and durable, Westin’s Wrangler JK Front Inner Fenders provide engine protection from rocks and debris while improving airflow to the engine compartment. Designed to fit with Westin’s Front Tube Fenders and made of 16 gauge steel. Sold in pairs and available in textured black finish. Hardware included for easy installation.

Product Features:

Made Of 16 Gauge Steel
Mesh Covered Openings To Provide Engine Compartment Ventilation
Protection From Rocks And Debris
Designed To Fit With West ins Front Tube Fenders
Sold In Pairs
Textured Black Finish
Hardware Included
Bolt On Installation; No Drilling Required

from

$249.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$275.99

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

Vehicle Specific Mounting Kit Required; Sold Separately
4 in. Oval Tube
Injection Molded Polymer Step Pad
Molded Oval End Caps
Bolt-On Installation; No Drilling Required
3 Year Warranty

from

$55.99

New Standard Replacement Driver Side Rear Fender Flare, Black Textured

Product Features:

Black Textured, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$53.99

New Standard Replacement Passenger Side Rear Fender Flare, Smooth, Paint To Match

Product Features:

Smooth, Paint To Match, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$29.99

New Standard Replacement Passenger Side Rear Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$3.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$109.99

Plastic Construction
Meets Quality Standards
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy To Install

In-Demand Vehicle Latches and Handles for 2008 Jeep Wranglers

Select from 39 premium Vehicle Latches and Handles parts for your 2008 Jeep Wrangler, with prices ranging from $9.99 to $292.99.

show more show less

from

$37.99

Hood no longer opening or closing properly? This replacement hood latch assembly matches the fit and function of the original equipment hood latch and is made of corrosion-resistant materials for reliable service.

Product Features:

Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch
Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration
Easy installation – requires no special tools to replace
Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service

from

$10.79

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

Black
OE Style
Direct Fit
Single
Limited 5 Year Warranty

from

$9.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$82.99

Paracord Grab Handle

from

$56.99

Product Features:

Limited 12 Month Warranty Or Limited 12,000 Mile Warranty

from

$21.49

Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch
Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration
Easy installation – requires no special tools to replace
Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service

from

$14.99

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

Ideal replacement – this window crank handle matches the fit and function of the original equipment component
Durable construction – this window crank handle is made of durable material to withstand extended use
Easy to install – this window crank requires no special tools to install
Versatile design – this window crank handle is suitable for use in various locations in the vehicle

from

$184.99

Has your hood been fluttering? Original hood catches degrade and fail and most aftermarket hood catches look spindly. These adjustable, durable, and aesthetically pleasing aluminum hood catches are proportional to the vehicle and offer a direct fit.

Product Features:

Textured Black
Aluminum
Reduces Hood Flutter
Limited 5 Year Warranty

from

$88.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

Black Powder Coated
OE Style
Direct Fit
Resistant To Rust And Corrosions
Limited 5 Year Warranty

from

$45.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$13.49

Liftgate Hinge Cover; Left/Right; 07-17 Jeep Wrangler JK/JKU

from

$292.99

This tailgate latch is designed to match the fit and function of the original latch on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this tailgate latch is designed to match the fit and function of the original latch on specified vehicles
Restores functionality – this latch is made to fit and fully restore part functionality after the original latch fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$237.99

Aluminum Grab Handle

from

$203.99

Hood Catch Kit; Silver; 07-18 Jeep Wrangler JK

from

$189.99

Enhance the appearance of your Jeep with these premium CNC machined billet aluminum accessories from Rugged Ridge. Available in a lightly brushed or black anodized finish. These high quality accessories replace your factory components with no drilling or

Product Features:

Black
Molded Foam Handles
Easy to Install
Easily Attached to Factory Mounts
Limited 5 Year Warranty

from

$189.99

Billet Aluminum

from

$173.99

Door latches are included with half doors and tube doors, but are available separately for custom applications.

Product Features:

For Half And Tube Doors
Pair

from

$144.99

Aluminum Grab Handle

from

$136.99

from

$136.99

Aluminum Grab Handle

from

$136.99

Steel Grab Handles

Hood Latch Assembly: Left and Right Hood Catch Lock Set, Black Steel

from

$114.99

Bolt on security for your engine compartment and under hood accessories with a Locking Hood Catch Kit from RT Off-Road. Included with each kit is a pair of black powder coated 304 stainless steel hood catches, a set of pre-installed lock cylinders with keys and all necessary hardware. Hood flutter, a very common problem with all Jeep JKs is eliminated by omitting rubber from the construction of the kit. This kit fits in place of the factory hood catches; a no-drill installation.

Product Features:

Made with 34 Stainless Steel
Eliminates Hood Flutter at Highway Speeds
No-Drill Installation
Sold in Pairs

from

$82.99

Steel Grab Handles

from

$77.99

Handle; Door/Tailgate; Outer; 07-17 Wrangler JK

Most Sold 2008 Jeep Wrangler Vehicle Hoods

Explore our best-selling Jeep parts for the 2008 Wrangler among 19 OEM and aftermarket options starting from $7.79.

show more show less

from

$26.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$61.99

Increase the efficiency of your heater and air conditioner with these easy to install Hood Scoops. Available in UV treated chrome plastic, black UV treated plastic or durable smoked acrylic for long life and matching good looks.

Product Features:

Black
UV Treated
Easy to Install

from

$61.99

2006-2012 Wrangler & Wrangler Unlimited, Liftgate Support Strut (Shock), LH or RH

from

$18.49

This hood stop support is designed to match the fit and function of the original support on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this hood stop support is designed to match the fit and function of the original support on specified vehicles
Restores functionality – reliable replacement for an original support that has failed due to collision damage or has cracked from fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$147.99

Product Features:

Limited 12 Month Warranty Or Limited 12,000 Mile Warranty

from

$10.49

Hood Bump Stop; 07-17 Jeep Wrangler JK/JKU

from

$599.99

New Standard Replacement Hood Panel, With 2 Washer Nozzles, Without Power Bulge

Product Features:

With 2 Washer Nozzles, Without Power Bulge, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$565.99

New Economy Replacement Hood Panel, One Washer Hole, High Strength Steel

Product Features:

One Washer Hole, Made Of High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$268.99

The new JK Hood Louvers from Rugged Ridge mount to the factory JK hood and are designed to provide more ventilation surface area to assist with reducing heat build-up in the engine compartment.

Product Features:

Stainless Steel
Weather Resistant
Sold Individually
Installs Directly Covering Factory Hinge Using Existing Hardware

from

$163.99

Get the ultimate WOW factor with Rugged Ridge polished stainless steel accessories. These beautiful bolt on accessories turn even the most worn Jeep into a hot street machine. Constructed of prime 304 stainless steel that has been polished to a mirror finish.

Product Features:

Stainless Steel
Weather Resistant
Pair
Installs Directly Covering Factory Hinge Using Existing Hardware

from

$158.99

These cast stainless design Hinge Treatments are guaranteed not to rust while providing a new beefy look. Door and Hood Hinge covers feature a easy to install design. Replacing your existing hinges can break and crack the surrounding paint, as the hinges

Product Features:

Stainless Steel
OE Style
Direct Fit
Includes Hardware
Limited 5 Year Warranty

from

$131.99

from

$106.99

Stainless Steel
Weather Resistant
Sold Individually
Installs Directly Covering Factory Hinge Using Existing Hardware

from

$86.99

from

$85.99

Chromed Plastic
UV Treated
Easy to Install

from

$81.99

New Standard Replacement Driver Or Passenger Side Hood Hinge

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$53.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$47.99

Seal; Hood to Grille; 07-17 Jeep Wrangler JK/JKU

from

$7.79

Bumper; Hood to Fender; 07-17 Jeep Wrangler JK/JKU

Top-Rated Body Parts Brands For Your 2008 Jeep Wrangler

Shop for the best-rated brands offering Body Parts and other products for your 2008 Jeep Wranglers. Below you’ll find some of our best rated Body Parts from StrongArm, Rugged Ridge, and Dorman, and more. Body Parts from these brands that fit a 2008 Wrangler start at just $4.99 and are rated as high as 4.5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular StrongArm 2008 Jeep Wrangler Body Parts

When it comes to maintaining or upgrading your 2008 Jeep Wrangler, using quality Body Parts is essential to ensure durability and a perfect fit. StrongArm ticks all of those boxes. We offer a wide selection of StrongArm Body Parts, specifically designed for the 2008 Jeep Wrangler. With over 1 StrongArm brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $26.99. Plus, with over 2 customer reviews and an average rating of 4.5 stars, you can trust that our StrongArm Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $26.99

(2)

Back Glass Lift Support: 22.99" Ext Length, 9.14" Travel, 28 Lbs of Force, 1 Pk

“These parts were easy to use and worked exactly how they should. great customer service by Amy. Thanks”

Popular Rugged Ridge 2008 Jeep Wrangler Body Parts

Rugged Ridge auto parts is one of the highest quality Body Part brands in the market. Any 2008 Jeep Wrangler owner should feel confident when installing genuine Rugged Ridge parts in their vehicle. To ensure the best fit and performance for your 2008 Wrangler, Advance Auto Parts carries a full inventory of 3 Rugged Ridge Body Parts. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Rugged Ridge Body Parts range from $61.99 to $132.99, plus, with more than 3 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

from $61.99

(1)

Hood Scoop

“THIS PRODUCT HELP INCREASE AIR FLOW IN ENGINE COMPARTMENT,BIG HELP WITH HOT FOUR WHEELING DAYS”

from $96.99

(1)

Windshield Header

“I purchased this lower control arm for my 2007 Toyota Tacoma Pre-Runner and it works as advertised – direct fit in replacing the OE lower control arm.”

from $132.99

(1)

Grille Insert Kit; Black

“Looks really sharp on my Wrangler Dozer; good contrast to a light body color. Description says 2007-11 models, but fits 2012 and 13 as well.”

FAQs for 2008 Jeep Wrangler Body Parts

Which Body Parts are best-sellers for 2008 Jeep Wranglers?

Out of 428 Body Parts that fit 2008 Jeep Wranglers, the following parts are the top sellers:

GM 1/4" Screw Rivets (11910954) – $4.99
T-style Fender Flare/Rocker Molding Clip; 07-17 Jeep Wrangler JK (10952109) – $6.49
GM Bumper Retainer (11911130) – $4.99

What’s the price range for 2008 Jeep Wrangler Body Parts?

Body Part prices for the 2008 Jeep Wrangler start at $0.99 and go up to $2,368.00 for the most premium parts.

What’s the average price of a Body Part for a 2008 Jeep Wrangler?

The average price for Body Parts for the 2008 Jeep Wrangler is $194.81. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Jeep Wrangler model years?

Yes, we currently carry Body Parts for 36 model years of Jeep Wranglers between 1987 and 2025. Body Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Body Parts for my 2008 Jeep Wrangler?

The cheapest 2008 Jeep Wrangler Body Parts we carry in stock are:

Bumper Retainer-Exterior-GM (Sold by each) (11224159) – $0.99
Panel Trim Retainer, Interior, GM/Ford/Chrysler (Sold by each) (22141968) – $0.99
Fender Blind Rivet-Exterior-GM (sold by each) (11224064) – $1.29
OE Replacement, Black, Nylon, Single (50074585) – $1.99
One Piece Christmas Tree Design, Smooth Head, Black, Plastic, Single (50074288) – $2.99

What are the top-rated Body Parts that fit the 2008 Jeep Wrangler?

Out of 66 reviews by customers, our 2008 Jeep Wrangler Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 2008 Jeep Wrangler and their top-rated products:

Windshields
- Windshield Header (10973633) – $96.99

What types of Body Parts do you sell for my 2008 Jeep Wrangler?

As of 11/2/25, these are some of the most in-demand types of Body Parts for a 2008 Jeep Wrangler:

Can I get help with 2008 Jeep Wrangler Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Body Parts and more.

What is your return policy for Jeep Wrangler Body Parts?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Jeep Wrangler Body Parts

Rugged Ridge – Steel Tube Fender Flares; F/R Set; 07-18 Wrangler JK (Part No.11615.48)

Westin – Triple Tube Rock Rail Steps (Part No.42-6025)

Crown Auto Jeep Replacmnt – Oem Replacement (Part No.55345787)

KAI – Bumper Cover Reinforcement (Part No.CH1006212DSC)

Omix – Hardtop Nut with Cli (Part No.12304.31)

Rugged Ridge – Dash Organizer (Part No.13551.11)

TrailFX – 3"Round Bent 90Deg, Powder Coated Black Steel, Rocker Panel Mount, With Step Pad (Part No.A0056S)

WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.120097)

KAI – Spare Tire Bracket (Part No.CH5998100)

Omix – Inner Glass Seal; Left; 87-95 Jeep Wrangler YJ (Part No.12303.09)

Rugged Ridge – Tonneau Cover; 07-18 Jeep Wrangler JKU; 4 Door (Part No.13550.04)

Dorman – Help – Stainless Steel Door Hinge Screws (Part No.45998)

Crown Auto Jeep Replacmnt – OE Replacement, Single (Part No.55397117AB)

RT Offroad – Grab Handle Set (Part No.RT27049)

Dorman – Integrated Door Lock Actuator (Part No.931-694)

Crown Auto Jeep Replacmnt – HOOD HINGE (Part No.55016588)

Rugged Ridge – Hood Kit (Part No.11101.03)

KAI – Bumper Cover Molding (Part No.CH1044115)

Crown Auto Jeep Replacmnt – Black, Oem Replacement, Strut Only, Single (Part No.55029560)

Rugged Ridge – Tailgate Stop Bumper; Billet Aluminum; 87-18 Jeep Wrangler YJ/TJ/JK (Part No.11238.11)

Omix – Fender Flare Retainer (Part No.11609.26)

Dorman – Fender/ Splash Shield W Type Clip – Fits 10mm Hole (Part No.963-158D)

Rugged Ridge – 4-Inch Oval Side Ste (Part No.11591.13)

Omix – DoorCheckStrap (Part No.11812.92)

Omix – Push Pin Fastener; G (Part No.12218.01)

Rugged Ridge – Door Latch Set (Part No.11812.80)

KAI – Passenger Side Rear Bumper End (Part No.CH1105140)

Rugged Ridge – Xtreme Heavy Duty; Bumper End Caps (Part No.11541.10)

Dorman – Help – Stainless Steel Door Hinge Screws (Part No.45998)

Dorman – Integrated Door Lock Actuator (Part No.931-694)

Crown Auto Jeep Replacmnt – OE Replacement, Hood Mount, Single (Part No.55176422)

Dorman – Integrated Door Lock Actuator (Part No.931-695)

Omix – Plug; Door Shell; 99-17 TJ/JK/WJ/KJ (Part No.12029.43)

RT Offroad – Door Hinge Pin and Bushing Kit: Door Hinge Pin Kit Set of 8 Delrin Bushings With Tool (Part No.RT25005)

Dorman – Help – Door Hinge Pin Repair Kit (Part No.38633)

Omix – Full Door Seal; Front; Right; 07-17 Jeep Wrangler JK (Part No.12303.21)

Omix – Full Door Seal; Rear; Left; 4 Door; 07-17 Jeep Wrangler JKU (Part No.12303.32)

Rugged Ridge – All Terrain Entry Guard Kit; 07-18 Jeep Wrangler JK; 2 Door (Part No.11216.20)

RT Offroad – Door Hinge Pin and Bushing Kit: Door Hinge Pin Kit Set of 4 Delrin Bushings With Tool (Part No.RT25004)

Rugged Ridge – Door Hinge Kit; 8 Piece; 07-18 Jeep Wrangler Unlimited JKU; 4 Door (Part No.11202.32)

Bestop – Soft Door Kits (Part No.51798-35)

Rugged Ridge – Door Hinge Kit; Stainless Steel; 07-18 Jeep Wrangler JK (Part No.11111.20)

ARIES – Tubular Front Jeep Door (Part No.AR15009)

TrailFX – Tubular Full Door, Textured Powder Coated, Black, Steel, Set Of 2 (Part No.J051RD)

ARIES – Tubular Rear Jeep Door (Part No.25009)

McGard – JEEP WRANGLER JK DOOR LOCK-DISPLAY PACK (Part No.90225)

Rugged Ridge – Hood Hinge Kit; Stainless Steel; 07-18 Jeep Wrangler JK (Part No.11111.22)

Rugged Ridge – Door Hinge Cover Kit; Textured Black; 07-18 Jeep Wrangler JK (Part No.11202.04)

Rugged Ridge – Door Hinge Cover Kit; Textured Black; 07-18 Jeep Wrangler JK (Part No.11205.10)

Rugged Ridge – Door Hinge Set, Black Aluminum, Rh, Pair, Jeep Wrangler (Jk) 07-11 (Part No.11202.22)

Rugged Ridge – Door Hinge Set, Cast Black Steel, Lh, Pair, Jeep Wrangler (Jk) 07-11 (Part No.11202.23)

Omix – Full Door Seal; Rear; Right; 4 Door; 07-17 Jeep Wrangler JKU (Part No.12303.31)

Dorman – Window Regulator: Power, 1 Pack (Part No.749-912)

Dorman – Window Regulator: Power, 1 Pack (Part No.749-911)

Rugged Ridge – Eclipse Sun Shade (Part No.13579.04)

Dorman – Window Regulator: Power, 1 Pack (Part No.749-910)

Dorman – Window Regulator: Manual, 1 Pack (Part No.752-809)

Dorman – Window Regulator: Manual, 1 Pack (Part No.752-810)

Rugged Ridge – Eclipse Sun Shade (Part No.13579.06)

AISIN – Power Window Regulator Assembly without Motor (Part No.RPCH-048)

Omix – Window Regulator (Part No.11821.21)

AISIN – Power Window Regulator Assembly without Motor (Part No.RPCH-045)

AISIN – Power Window Regulator Assembly without Motor (Part No.RPCH-046)

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

Westin – Premier 6 Oval Nerf Step Bars (Part No.22-6000)

ARIES – Jeep Tire Relocation Carrier Kit (Part No.25630AB)

Omix – T-style Fender Flare/Rocker Molding Clip; 07-17 Jeep Wrangler JK (Part No.11609.28)

Dorman – GM Bumper Retainer (Part No.963-202D)

KAI – Front Driver Side Fender Brace (Part No.CH1244100)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.52060428AB)

Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)

Dorman – Position Strut Bumper (Part No.523-258)

Crown Auto Jeep Replacmnt – Foam, White, Single (Part No.52060423AB)

KAI – Front Passenger Side Fender Brace (Part No.CH1245100)

ARIES – 3 Inch Round Side Bars (Part No.35700)

Omix – Spare Tire Carrier Bump Stop; 07-17 Jeep Wrangler JK (Part No.11503.93)

Omix – Plug; Floor; 6.3mm Hole; 84-99 Jeep Cherokee/Comanche (Part No.12033.15)

KAI – Spare Tire Bracket (Part No.CH5998100)

Westin – Inner Fenders (Part No.62-11015)