2008 Jeep Wrangler Bumpers

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

This three in. round black plastic tubular bumper end caps from Rugged Ridge presses in easily and will replace your missing caps for a completed look. Will fit most three in. tube bumpers. Sold individually.

New Standard Replacement Front Bumper Cover Molding [Applique] Prime/Paint To Match Finish

The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular package includes the rear corners only. These two corners are intended to be mounted on the TrailChaser rear bumper center section (sold separately). They offer a bold finishing touch with an aggressive cutout and mounting points for additional lights. These side extensions are constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and have a unique, textured black powder coat finish for maximum corrosion resistance. They are also available in powder-coated steel.

The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler and Gladiator because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular package includes the front-end corners only. These two corners are intended to be mounted on the TrailChaser front Jeep JL / JT bumper center section (sold separately). They provide cutouts to relocate the Jeep JL / JT fender flare turn signals when installing aftermarket fender flares. These corner end caps are constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and have a unique, textured black powder coat finish for maximum corrosion resistance. They are also available in powder-coated steel.

New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

“The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler JK because it features a modular design. With a variety of options to choose from, you can select the perfect configuration to match the style of your Jeep Wrangler. All TrailChaser bumpers are also compatible with a variety of accessories, including LED lights, D-rings, tow hooks and a winch. This particular TrailChaser bumper comes with a center section, corner end caps and angular center brush guard. It is constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and has a unique, textured black powder coat finish for maximum corrosion resistance. It is also available in high-strength, powder-coated steel. The bumper center section features a standard 22-1/2″” x 7-3/4″” winch housing and is compatible with the ARIES winch adapter #2072100 for larger winches. It provides cutouts for lights and has pre-drilled holes for D-rings #2081300 and tow hooks #15600TW. The stinger-style angular brush guard of this bumper not only adds an aggressive look to your Jeep JK, but it also provides additional mounting points for an LED light bar or LED work lights. It features a full-length, slotted channel along the center cross-member, allowing lights to be mounted on the top or bottom. The bumper corners offer a professional finishing touch with their compact, angular design. They feature the same durable powder coat as the center section and can be drilled or cut to mount additional lights. We also offer an option with these same corners with integrated, flush-mount LED lights. All ARIES TrailChaser bumpers install using pre-existing factory mounting points for fast, easy installation with no drilling required.”

The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler JL because it features a modular design. This particular bumper for the rear of the Jeep includes the center section and side extensions. It is constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and has a unique, textured black powder coat finish for maximum corrosion resistance. It is also available in high-strength, powder-coated steel. All ARIES TrailChaser bumpers install using pre-existing factory mounting points for fast, easy installation with no drilling required.

“The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler JK because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization and a look that best characterizes your Jeep Wrangler. All TrailChaser bumpers are also compatible with a variety of accessories, including LED lights, D-rings, tow hooks and a winch. This particular piece includes the front-end center section only and is intended to accept corners and brush guards (sold separately). It is constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and has a unique, textured black powder coat finish for maximum corrosion resistance. It is also available in high-strength, powder-coated steel. This bumper center section features a standard 22-1/2″” x 7-3/4″” winch housing and is compatible with the ARIES winch adapter #2072100 for larger winches. It provides cutouts for lights and has pre-drilled holes for D-rings #2081300 and tow hooks #15600TW (lights and accessories not included). All ARIES TrailChaser bumpers install using pre-existing factory mounting points for fast, easy installation with no drilling required.”

Designed for the ARIES TrailChaser Jeep bumper, these anti-rattle D-rings offer reliable strength for the serious off-road-style Jeep Wrangler JK. Their key feature is a rubber grommet built into each D-ring mounting bracket. This grommet is compressed when the D-ring is mounted into place, tightening and even restricting movement to eliminate vibrations. The integrated grommet also provides an additional convenience by allowing the D-ring to be held in the horizontal position, if needed, for better accessibility during use. ARIES anti-rattle D-rings include thick, strong backing plates and come with all necessary hardware for installation. Featuring a work load limit of 9,000 lbs., they can be used on the ARIES TrailChaser bumper or other front-end accessories (limited to the capacity of the mounting structure). Each D-ring is constructed from strong, forged steel and has a highly durable carbide black powder coat finish for long-lasting rust resistance on the trail. Each kit includes two D-rings.

The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler JK because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular piece includes the rear center section only and is intended to accept corners (sold separately). It is constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and has a unique, textured black powder coat finish for maximum corrosion resistance. It is also available in powder-coated steel.

“The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring winch and shackle capabilities with a 12.5K rating. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″” thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″” thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch-and-shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″” in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070, roller fairlead #2156071 and winch fairlead mount #15600FB. For added winch protection and an aggressive look on the Jeep JL, a stinger-style angular brush guard #2156050 is available. The TrailCrusher bumper is fast and easy to install, integrating with the Jeep Wrangler JL like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″” steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear ARIES one-piece bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation and is covered by a three-year warranty.”

Crown Auto Jeep Replacmnt , 1BD22RXFADK.

This jounce bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Auveco products provide OE fit and function.

Auveco products provide OE fit and function.

Auveco products provide OE fit and function.

Auveco products provide OE fit and function.

Auveco products provide OE fit and function.

Auveco products provide OE fit and function.