2008 Jeep Wrangler Exhaust Parts

Essential 2008 Jeep Wrangler Exhaust Parts

Felpro – Exhaust Pipe Flange Gasket (Part No.61494)

Exhaust Pipe Flange Gasket

from

$11.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Omix – Exhaust Flange Gasket (Part No.17617.06)

Exhaust Flange Gasket

from

$14.79
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a bad exhaust pipe gasket. Omix-ADA offers high quality exhaust gaskets to solve the problem.

Product Features:
  • Front
  • Composite
  • Heat Resistant
  • Limited 5 Year Warranty
See More

MBRP Exhaust – Black Coated Steel, 2.5"Dia Pipe, Single Exhaust With Dual Split Rear Exit (Part No.S5529BLK)

Black Coated Steel, 2.5"Dia Pipe, Single Exhaust With Dual Split Rear Exit

from

$471.99
Our Black Series performance exhaust systems offer a true murdered-out style without compromising on quality and performance. With fully sealed seams to resist rust you can count on this system to really hold up. The black coat finishing is recommended for driving areas that are not exposed to salt and other chemicals on the road.

Product Features:
  • Black Series Axle Back System
  • Built To Perform Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Truck Will Use Less Gas, Last Longer And Perform Better
  • Dyno Proven, Undergone Countless Hours On Our In-House Mustang 1100 AWD-SE Chassis Dynomometer, Hundreds Of Miles On Road And Track And Numerous Tweaks To Get The Most Out Of The Truck
  • Sound And Style Specifically Tuned To Get The Optimal Sound From The Pickup
  • Built To Perform Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Ride Will Use Less Gas, Last Longer And Perform Better
  • Easy Installation, Bolt-On, No Weld Design Makes Installation A No Hassle One And A Half To Two Hour Project
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.19417)

Street Series Cat-Back Performance Exhaust System

from

$1290.00
The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19417 brings out the personality of your 3.6L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19417 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19417 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

AP Exhaust – Exhaust Clamp (Part No.H80202393166APE)

Exhaust Clamp

from

$5.09
The AP Exhaust / Exhaust Clamp is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

BRExhaust – Exhaust Clamp (Part No.250-058)

Exhaust Clamp

from

$6.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

Dynomax – 52515 Exhaust Intermediate Pipe (Part No.52515)

52515 Exhaust Intermediate Pipe

from

$25.49
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

aFe POWER – Loop Relocation Pipe (Part No.48-48027)

Loop Relocation Pipe

from

$435.99
aFe POWER Twisted Steel Exhaust Loop Relocation Pipe replaces the restrictive factory downpipe header for improved flow, while relocating the exhaust header loop to accommodate a long-arm lift kit setup. The 2 IN mandrel-bent, 409 stainless steel tubing provides optimum flow while maintaining equal length between the exhaust banks and exhaust system without compromise. Direct bolt-on installation doesn’t require any cutting or drilling.

Product Features:
  • Accommodates most aftermarket long-arm lift kits to resolve clearance issues
  • Provides Optimum Flow and Performance
  • Mandrel-Bent Tubing for Smooth Transitions and Increased Power
  • OE-style flanges and Stainless Clamps for Improved Sealing Surface
See More

Felpro – INTAKE & EXHAUST MANIFOLD GASKET SET (Part No.MS 92100)

INTAKE & EXHAUST MANIFOLD GASKET SET

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Premium quality parts
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
See More

Omix – Exhaust Manifold Gasket Set (Part No.17451.06)

Exhaust Manifold Gasket Set

from

$23.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, it’s time to replace the exhaust manifold gasket. Omix-ADA offers high quality exhaust manifold gaskets to solve the problem.

Product Features:
  • Composite
  • Heat Resistant
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

JBA Performance – 1527SJT 1 1/2" Header Shorty Stainless Steel 00-06 Jeep Wrangler 4.0L Titanium Ceramic (Part No.1527SJT)

1527SJT 1 1/2" Header Shorty Stainless Steel 00-06 Jeep Wrangler 4.0L Titanium Ceramic

from

$752.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 1527SJT 1 1/2″ Header Shorty Stainless Steel 00-06 Jeep Wrangler 4.0L Titanium Ceramic
  • Mandrel bent stainless steel tube
See More

Omix – Exhaust Manifold (Part No.17624.07)

Exhaust Manifold

from

$254.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a cracked exhaust manifold. Omix-ADA offers high quality exhaust manifolds and gaskets to solve the problem.

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15042)

Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed

from

$167.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.

Product Features:
  • EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
  • NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51206)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51205)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.50065)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$118.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker® Quiet-Flow® muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.

Product Features:
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • RESISTS CORROSION — Internal drainage system helps reduce moisture collection
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Flowmaster Inc. – 50 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842452)

50 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

from

$169.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Super 50 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.852556)

Super 50 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, 17in long, Non-Reversible, Moderate Sound

from

$206.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:
  • Mild to stock exterior exhaust tone
  • Minimal interior resonance
  • Excellent choice for large displacement vehicles
  • Improved horsepower, torque and potential mileage improvement
  • Race proven patented Delta Flow technology
See More

Dorman – Help – Exhaust Manifold Hardware Kit – M8-1.25 Stainless Steel (Part No.03413HP)

Exhaust Manifold Hardware Kit - M8-1.25 Stainless Steel

from

$28.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance
  • Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
  • Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03408B)

Exhaust Manifold Hardware Kit

from

$13.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413B)

Exhaust Manifold Hardware Kit

from

$17.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Walker – Exhaust 36221 Exhaust System Hanger Insulator (Part No.36221)

Exhaust 36221 Exhaust System Hanger Insulator

from

$12.29
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)

Exhaust 35460 Exhaust System Hanger Insulator

from

$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Dynomax – 36517 Exhaust Bracket (Part No.36517)

36517 Exhaust Bracket

from

$32.49
Complete your exhaust repair with DynoMax® exhaust brackets. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax brackets are manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • OE DESIGN — Designed with OE-style features (where applicable) for easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from quality steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dorman – Help – Exhaust Stud Kit – 3/8-16 x 1-11/16 In. (Part No.03127)

Exhaust Stud Kit - 3/8-16 x 1-11/16 In.

from

$15.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:
  • Direct replacement for a proper fit every time
  • Durable steel construction
  • New hardware helps fix exhaust leaks
  • Also available in the Exhaust Manifold Hardware Kit
See More

2008 Jeep Wrangler Exhaust Parts

You count on your 2008 Jeep Wrangler to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 55 Exhaust Parts ranging in price from $6.79 to $2,321.99, you’re sure to find everything you need for your 2008 Jeep Wrangler.

Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 15 different brands like Walker, Dorman, and Felpro. 2008 Jeep Wrangler Exhaust Parts start as low as $6.79!

One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 525 extensive product reviews on 2008 Jeep Wrangler Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Intermediate Pipe Aluminized 77" with 5.0 stars and Seal-4-Good Header Flange Gasket with 5.0 stars.

Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2008 Jeep Wrangler below to get started!

Top-Rated Exhaust Parts Brands For Your 2008 Jeep Wrangler

Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Jeep Wrangler running right for years to come. In our inventory you’ll find brands like Walker, Dorman, Felpro, and even more.

Popular Felpro Exhaust Parts

You’ll find popular Felpro brand products across Exhaust Gaskets. All are waiting to get your 2008 Jeep Wrangler back on the road. Some of the top-rated Felpro products in these categories are:
Exhaust Manifold Gasket Set
from $12.99
(1)
Exhaust Manifold Gasket Set
Exhaust Manifold Gaskets

Top-Rated Walker Exhaust Parts


If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 2008 Jeep Wrangler, and some of our most reviewed Walker parts include:
Exhaust 35460 Exhaust System Hanger Insulator
from $6.79
(53)
Exhaust 35460 Exhaust System Hanger Insulator
Exhaust System Insulators

FAQs for 2008 Jeep Wrangler Exhaust Parts

What are the most purchased Exhaust Parts for the 2008 Jeep Wrangler?

Out of 55 Exhaust Parts for the 2008 Jeep Wrangler, the most popular in our inventory are:
Exhaust Manifold Hardware Kit
from $17.99
(17)
Exhaust Manifold Hardware Kit
Exhaust Manifold Hardware Kits
Direct Fit Exhaust Manifold: With Heat Shield
from $141.99
(4)
Direct Fit Exhaust Manifold: With Heat Shield
Exhaust Manifold and Headers
Direct Fit Exhaust Manifold: With Heat Shield
from $179.99
(1)
Direct Fit Exhaust Manifold: With Heat Shield
Exhaust Manifold and Headers

What are the top-rated 2008 Jeep Wrangler Exhaust Parts?

Top-rated Exhaust Parts for your 2008 Jeep Wrangler based on customer reviews/ratings are:
Intermediate Pipe Aluminized 77"
from $81.99
(1)
Intermediate Pipe Aluminized 77"
“Fits great!”
Seal-4-Good Header Flange Gasket
from $48.99
(1)
Seal-4-Good Header Flange Gasket
“Ver y good”
Street Series Axle-Back Performance Exhaust System
from $799.99
(1)
Street Series Axle-Back Performance Exhaust System
“Exact match for 1987 1.3L non-turbo rotary rx-7 w auto sensing suspension. 4 port master w 2 prong low level switch.”