2008 Infiniti FX45 Serpentine and V Belts
More 2008 Infiniti FX45 Serpentine and V Belts
Find your specific 2008 Infiniti FX45 original or aftermarket Serpentine and V Belts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2008 Infiniti FX45 Serpentine and V Belts
Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100087561MBL)
from
$35.41
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
Bando – Multi Rib (Serpentine) Belt (Part No.W100087561BAN)
from
$24.93
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Bando – Multi Rib (Serpentine) Belt (Part No.W100027666BAN)
from
$14.06
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100027666MBL)
from
$15.40
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
Dayco – Poly Rib Belt Serpentine Belt; 76.38 Long, 6 Rib Count (Part No.5060763)
from
$32.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Driveworks – Poly Rib Belt Serpentine Belt; 76.38 Long, 6 Rib Count (Part No.763K6)
from
$21.29
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Dayco – Aramid Cord Poly Rib Belt Serpentine Belt; 76.38 Long, 6 Rib Count (Part No.A060763)
from
$46.99
The Dayco poly-V aramid belt is engineered to maintain a quiet, vibration-free belt drive system, especially for higher output OE engines that require an aramid belt. Unlike polyester-corded belts, this aramid cord belt is designed to resist the expected elongations, especially during high accessory loading. This unique feature of length stability and minimal stretch aids in difficult drives where span vibrations and tensioner movements are excessive. The Dayco aramid cord poly rib belt is built with Dayco’s specially designed EPDM rubber compounds to resist cracking and perform better under extreme temperature ranges.
Product Features:
See More
Product Features:
- Designed for applications with an OEM aramid belt and is specifically helpful for those with noise, vibration or harshness issues, or in-drive systems in which tensioner take-up is minimal
- Length stability resists excessive span vibrations or tensioner movements
- Features special compounds that resist cracking and perform well under intense engine temperatures
Gates – Micro-V« Serpentine Drive Belt (Part No.K060763)
from
$34.49
Product Features:
See More
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
Dayco – Poly Rib Belt Serpentine Belt; 37.25 Long, 4 Rib Count (Part No.5040373)
from
$30.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Gates – Micro-V« Serpentine Drive Belt (Part No.K040372)
from
$31.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Driveworks – Poly Rib Belt Serpentine Belt; 37.25 Long, 4 Rib Count (Part No.373K4)
from
$23.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Dayco – Dayco, Acc. Belt Idler Pulley (Part No.G6020298874DAY)
from
$58.78
The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Precision bearing
- OE High quality pulley assembly
- Durable long life performance.
Dayco – Serpentine Idler/Tensioner Pulley; Steel, 84mm Dia., 25.1mm Width, Smooth (Part No.89150)
from
$55.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Popular 2008 Infiniti FX45 Serpentine and V Belts Categories
2008 Infiniti FX45 Serpentine and V Belts
Maybe you’re in the middle of a full rebuild of that 2008 Infiniti FX45. Maybe you just need a couple of Serpentine and V Belts. Either way, Advance Auto Parts has 14 different Serpentine and V Belts in our inventory ranging from $14.06 to $58.78. That means you can find the exact parts or products you need to keep that 2008 Infiniti FX45 running smoothly.
Serpentine and V Belts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2008 Infiniti FX45. Dayco, DriveWorks, and Mitsubishi are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Serpentine and V Belts for your 2008 Infiniti FX45, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Serpentine and V Belts to keep your 2008 Infiniti FX45 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Serpentine and V Belts Brands To Make Your 2008 Infiniti FX45 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 Infiniti FX45 demands trusted brand parts and products to keep it running. Many trusted brands of Serpentine and V Belts make up Advance Auto Parts’ inventory, and all are ready to help make your FX45 the best it can be. Be sure to browse some of our top Serpentine and V Belts brands and parts.
Popular Driveworks Serpentine and V Belts
We carry Driveworks parts in our stock across Serpentine Belts categories, plus more. For a 2008 Infiniti FX45, our most popular Driveworks Serpentine and V Belts include:
Top 2008 Infiniti FX45 Serpentine and V Belts from Dayco
Dayco products are another trusted brand when it comes to Serpentine and V Belts for your 2008 Infiniti FX45. Popular Dayco parts include:
from
$55.99
(2)
Serpentine Idler/Tensioner Pulley; Steel, 84mm Dia., 25.1mm Width, Smooth
Drive Belt Idler Assemblies
FAQs for 2008 Infiniti FX45 Serpentine and V Belts
What are the most purchased Serpentine and V Belts for the 2008 Infiniti FX45?
Out of 14 Serpentine and V Belts for the 2008 Infiniti FX45, the most popular in our inventory are:
