2008 Hyundai Tiburon Steering and Chassis Parts

Essential 2008 Hyundai Tiburon Steering and Chassis Parts

Atlantic Automotive Eng. – Power Steering Pump, Remanufactured (Part No.M20101196205AAE)

Power Steering Pump, Remanufactured

from

$223.39
AAE remanufactured Power Steering Pumps not only offer a high quality, low cost alternative to new parts, but are the leading choice in the remanufactured market.

Product Features:
  • OEM-Quality and Direct Fit replacement.
  • Original Equipment Supplier
  • 100% new, premium-grade seals
  • Surface wear on cam packs are microfinished
  • Seal surface on input shafts are microfinished for leak-free sealing
  • Pumps are thoroughly tested
See More

Driveworks – Camshaft Seal (Part No.S-223010)

Camshaft Seal

from

$7.99
Product Features:
  • Brand may vary by location
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620520)

Control Arm and Ball Joint Assembly

from

$141.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Whiteline – Sway Bar Link (Part No.KLC174)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90473)

Camber Bolt Kit

from

$17.99
Camber Bolt Kit

MOOG – Camber Adjusting Kit (Part No.K90474)

Camber Adjusting Kit

from

$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Cardone New – Power Steering Reservoir (Part No.3R-326)

Power Steering Reservoir

from

$53.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance
  • Designed to match O.E. fit, function and performance
  • Manufactured from O.E. grade material for strength and durability
  • Resistant to cracking caused by the high temperatures in the engine compartment
  • Reservoirs with integrated filter have the same filtration efficiency as O.E.
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90474)

Camber Bolt Kit

from

$20.29
DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:
  • Designed to meet OE Form, Fit, and Function.
  • Performance tested to ensure durability and reduce tire wear.
  • Precision engineered for improved ride and steering response.
  • Hardware included for ease of installation (where applicable)
See More

Driveworks – Camber Bolt Kit (Part No.DW-K5330)

Camber Bolt Kit

from

$29.99
Camber Bolt Kit

Whiteline – Sway Bar Link (Part No.W23180)

Sway Bar Link

from

$74.99
Do you have every sway bar link on the shelf? Well you don’t need too, Whiteline have developed a clever cut to length universal sway bar link that has a 10mm ball stud has a working range of 80-320mm c/c. 1 part number covers hundreds of applications.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Carquest Premium – Return Hose Assembly (Part No.40550)

Return Hose Assembly

from

$101.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Original Equipment – Sway Bar Bushing (Part No.L1050321497OEA)

Sway Bar Bushing

from

$16.09
The Original Equipment Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration. The Original Equipment Sway Bar Bushing is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Driveworks – Camber Bolt Kit (Part No.DW-K9757)

Camber Bolt Kit

from

$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

MOOG – Ball Joint (Part No.K500031)

Ball Joint

from

$45.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Powercraft – Pump Seal Kit (Part No.8843)

Pump Seal Kit

from

$46.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1026)

Power Steering Pressure Switch

from

$24.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Pressure Hose Assembly (Part No.37469)

Pressure Hose Assembly

from

$134.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Cardone – Rack and Pinion Assembly (Part No.26-2414)

Rack and Pinion Assembly

from

$311.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Driveworks – Tie Rod-Inner (Part No.DW-EV80310)

Tie Rod-Inner

from

$17.79
Driveworks chassis parts help to reduce internal friction and wear by a Premium low friction design which included a hardened and polished ball stud and a high strength polymer bearing.

Product Features:
  • Forged housing provides unequaled strength and durability.
  • Form a oxidation film on the surface of metal to protect the surface of metal from corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resisting surface to extend service life
  • Premium Polychloroprene Rubber Boots fitted with grease relief valves to keep out dirt
See More

TRW – Ball Joint (Part No.L2020143622TRW)

Ball Joint

from

$46.15
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K9882)

Rack & Pinion Bellows Kit

from

$39.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Rare Parts – Rack & Pinion Bellows (Part No.RP17819)

Rack & Pinion Bellows

from

$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Rein – Power Steering Suction Hose (Part No.PSH0341)

Power Steering Suction Hose

from

$35.99
Rein OE Quality power steering suction hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering suction hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:
  • A direct fit, replacement hose with clamps
  • OE quality, braided rubber compound hose
  • Pre attached protective jacket(s) and heat sleeve(s), where required
  • Ensures proper operation of the power steering system
See More

2008 Hyundai Tiburon Steering and Chassis Parts

You count on your 2008 Hyundai Tiburon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 66 Steering and Chassis Parts ranging in price from $7.06 to $434.99, you’re sure to find everything you need for your 2008 Hyundai Tiburon.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 18 different brands like Imperial, Cardone, and Driveworks. 2008 Hyundai Tiburon Steering and Chassis Parts start as low as $7.06!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,366 extensive product reviews on 2008 Hyundai Tiburon Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Pump with 3.1 stars and Tie Rod End with 4.9 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2008 Hyundai Tiburon below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2008 Hyundai Tiburon

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Hyundai Tiburon running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, Driveworks, and even more.

Popular CTR Steering and Chassis Parts

You’ll find popular CTR brand products across Tie Rods. All are waiting to get your 2008 Hyundai Tiburon back on the road. Some of the top-rated CTR products in these categories are:
CTR Tie Rod End
from $29.41
(1)
CTR Tie Rod End
Tie Rod Ends

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2008 Hyundai Tiburon, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 2008 Hyundai Tiburon Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2008 Hyundai Tiburon?

Out of 66 Steering and Chassis Parts for the 2008 Hyundai Tiburon, the most popular in our inventory are:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Camber Bolt Kit
from $20.29
(10)
Camber Bolt Kit
Front Alignment Kits
Camber Adjusting Kit
from $34.99
(9)
Camber Adjusting Kit
Camber Kits

What are the top-rated 2008 Hyundai Tiburon Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2008 Hyundai Tiburon based on customer reviews/ratings are:
Power Steering Pump
from $134.99
(14)
Power Steering Pump
“Exact fit, ok price. I have an old 2001 elantra car, so remanufactured part is best option for me. The most important things- price and warranty”
Tie Rod End
from $46.99
(7)
Tie Rod End
“Exact fit great price”
Camber Bolt Kit
from $17.99
(7)
Camber Bolt Kit
“Worked perfect!”