2008 Hummer H3 Clutch Systems
More 2008 Hummer H3 Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 2008 Hummer H3, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 2008 Hummer H3 Clutch Systems
GM Genuine Parts – Manual Transmission Clutch Pilot Bearing (Part No.CT1082)
from
$20.29
GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Support the end of the transmission input shaft while the clutch is disengaged
- Allows for smooth changing of gears
- Helps keep transmission input shaft properly aligned
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
LuK – Clutch Master Cylinder (Part No.LMC431)
from
$76.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LUK – Clutch Master Cylinder (Part No.I3000836116LUK)
from
$103.88
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
LuK – Clutch Kit: 11" Disc Diameter, 1 3/16" Input Shaft Diameter, 26 Tooth Spline (Part No.04-241)
from
$405.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Hays – Flexplate GM Ls (Part No.10-030)
from
$179.99
Flexplate GM Ls
LuK – OE Quality Flywheel (Part No.LFW466)
from
$119.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
ATP – Automatic Transmission Flex Plate (Part No.Z-269)
from
$77.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – AT FLEX PLATE (Part No.Z-498)
from
$256.99
AT FLEX PLATE
LuK – Clutch Slave Cylinder (Part No.LSC374)
from
$168.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
ARP Auto Racing – 10 Millimeter X 1.50 Thread Size, 180000 Psi Tensile Strength, Hex Style Head (Part No.134-2201)
from
$22.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- Sold As A Kit
- 180,000 PSI
Popular 2008 Hummer H3 Clutch Systems Categories
2008 Hummer H3 Clutch Systems
You count on your 2008 Hummer H3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 10 Clutch Systems ranging in price from $20.29 to $405.99, you’re sure to find everything you need for your 2008 Hummer H3.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 5 different brands like ATP, GM Genuine, and LuK. 2008 Hummer H3 Clutch Systems start as low as $20.29!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 6 extensive product reviews on 2008 Hummer H3 Clutch Systems.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 2008 Hummer H3 below to get started!
Top-Rated Clutch Systems Brands For Your 2008 Hummer H3
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Hummer H3 running right for years to come. In our inventory you’ll find brands like ATP, GM Genuine, LuK, and even more.
Popular ATP Clutch Systems
You’ll find popular ATP brand products across Flywheels. All are waiting to get your 2008 Hummer H3 back on the road. Some of the top-rated ATP products in these categories are:
FAQs for 2008 Hummer H3 Clutch Systems
What are the most purchased Clutch Systems for the 2008 Hummer H3?
Out of 10 Clutch Systems for the 2008 Hummer H3, the most popular in our inventory are:
from
$20.29
This product is not rated
Manual Transmission Clutch Pilot Bearing
Clutch Pilot Bearings
