from

$323.99

The turbocharger compressor wheel plays an important role in delivering high-pressure air to the intake manifold, resulting in more power. Traditional compressor wheels are made from cast aluminum which results in higher mass and lower fatigue life when compared to the lighter weight, stronger, CARDONE Billet compressor wheel. These billet wheels are well suited for high demand applications including high performance racing applications or high duty cycle applications such as buses or delivery vehicles. CARDONE Billet Compressor Wheels are designed to meet or exceed all O.E. performance standards and fit seamlessly into O.E. covers. Built for strength and tested for endurance, CARDONE Billet Compressor Wheels provide peace of mind for severe-duty demands.

Product Features:

Product designed and manufactured to accommodate O.E. applications
Fits into O.E. cover, no modifications needed
Meets or exceeds O.E. performance
All products are tested and inspected in an ISO-9001 compliant environment
Machined from forged billet for strength
Milled for consistent mass and consistent center of gravity
Machined with a high degree of precision
Stronger than OE cast aluminum wheels resulting in higher fatigue life

from

$321.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$179.99

This turbocharger vane position sensor matches the function of the original equipment sensor to restore the engine management system’s ability to determine the position of the vanes on a variable geometry turbocharger.

Product Features:

Ideal replacement – this sensor restores the engine management system’s ability to determine the position of the vanes on a variable geometry turbocharger
Easy to install – no special tools are required to install this vane position sensor
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone vehicle and inspection testing to ensure reliable performance

from

$26.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Engineered for the sealing repair environment
Unsurpassed quality you can trust

from

$3.28

The ACDelco GM Original Equipment Turbo Oil Line Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$6.49

GM Genuine Parts Turbocharger Oil Line Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$3.28

The ACDelco GM Original Equipment Turbo Oil Line Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$1252.00

Product Features:

All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
Each unit comes with a pre-lube syringe to ensure product protection during installation.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Meets or exceeds O.E. performance.
Comes with a pre-lube syringe to ensure product protection during installation.

from

$1144.00

Product Features:

All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
Each unit comes with a pre-lube syringe to ensure product protection during installation.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Meets or exceeds O.E. performance.
Comes with a pre-lube syringe to ensure product protection during installation.

from

$1488.00

Rotomaster Remanufactured Turbochargers meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster Turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back to peak performance with these direct-replacement turbochargers.

Product Features:

All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
Each unit comes with a pre-lube syringe to ensure product protection during installation.

from

$52.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$39.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$141.99

Rotomaster Turbocharger Service Kits provide all the wear items required to remanufacture a turbocharger that has not sustained any damage to the internal components. Featuring only O.E.-grade, direct-fit components, this kit offers a great, cost-effective way to perform a turbo repair without replacing the entire assembly.

Product Features:

Kit includes all serviceable components in one package for turbochargers without internal damage
Saves money by eliminating the need to replace the complete turbocharger assembly
Allows for reuse of the center, compressor and turbine housings
Only O.E.-grade component parts or better are supplied in kit for durability
Direct O.E. replacement

from

$229.99

Turbocharger Kit

from

$77.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$109.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$99.99

This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$92.99

This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$84.99

This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1689.99

When turbochargers fail, the common response is the replacement of the entire unit. However, the damage is often isolated within the turbo cartridge, which contains the core components of the turbo assembly. By replacing just the cartridge, the remaining components can be salvaged and repair times reduced. CARDONE cartridges are assembled with O.E.-grade components to ensure high performance and durability.

Product Features: