2008 GMC Sierra 3500 HD Air Suspension and Kits

Leveraging our history of providing high-performance air springs for the commercial trucking industry, we engineered our toughest line of light-duty aftermarket air springs, RED (TM) Label. These air spring kits are made with commercial-grade materials and can level up to 7500 pound. RED Label air spring kits utilize a pair of convoluted air springs, to raise your truck back up to manufacturers height while hauling or towing heavy. They are built to extreme specifications found in the most demanding applications. The same rubber from our Airide (TM) product line used on commercial trucks around the world paired with a commercial grade cord which gives you added durability and performance.

Product Features:

• Utilize High Strength Steel Alloy Brackets
• Enhanced Coating Technology Protects Against Elemental Conditions, Such As Corrosive DeIcing Agents And Salt Spray
• Handle Up To 150 PSI And Level Loads Up To 7500 Pound

Level out your Chevrolet® Silverado or GMC® Sierra 2500/35000 truck with the Rancho® 2.25-in. LEVEL IT torsion key system. Featuring bolt-on installation, the kit comes with Rancho RS500®X front shocks to accommodate tires up to 33-in.

Product Features:

• COMPATIBILITY — Designed for Chevy Silverado 2500/3500 and GMC Sierra 2500/3500 2/4WD heavy-duty trucks
• LEVELED STANCE — Reduces factory rake and evens out truck’s stance
• COMPLETE SOLUTION — Kit includes two LEVEL IT torsion keys and two Rancho RS5000®X extended length front shocks to accommodate tires up to 33-in. (tire size varies between manufacturers)
• MAINTAINS OE RIDE — Keeps factory ride quality for dependable performance
• ENGINEERED TO LAST — Torsion keys feature forged construction for long life and durable e-coat finish to resist rust and corrosion
• EASY TO INSTALL — Bolt-on installation for an easy upgrade
• NOTES — Rear RS5000®X shocks sold separately

Ride-Rite air springs utilize a pair of convoluted air springs, which can be adjusted for changing loads. These air springs are capable of 3,200 to 5,000 Pound of load leveling capacity. Ride-Rite air helper springs enhance the ride by reducing inter-leaf friction. Please remember that air springs do not increase the load carrying capacity of your vehicle. Ride-Rite air spring kits are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Ride-Rite air spring kits can be installed on most light trucks, motorhomes, RV’s, Suv and vans.

Product Features:

• Enhances Safe Load-Carrying Capacity, Stability, Ride Quality And Brake Effectiveness
• Most Kits Are No-Drill Systems
• Each Product Goes Through Robust, Comprehensive Testing To Deliver Durability You Can Depend On
• Comes With Everything For A Quick, Easy To Install

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• High-quality products that meet OE appearance and performance to

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

• The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
• The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
• Easy Installation

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)

2.0 Factory Shock

2.0 Factory Shock

2.0 Perf Shock

POWER STEERING FLUID

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers for the 2001-2010 GM Silverado/Sierra. These 2.5″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers excellent off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle. * This aFe Control Suspension product is designed and engineered in our Corona, California facility.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

2.5 Perf Shock

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shocks for the 2001-2010 GM Silverado/Sierra HD models. These 2.5″ diameter shocks feature all the same race winning engineering components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers better off road damping curves without sacrificing any on road comfort or handling. These front shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle. *This aFe Control Suspension product is designed and engineered in our Corona, California facility.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• 7/8 in. Polished Nitro Steel Shafts For Strength and Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage