2008 Freightliner Sprinter 2500 Brake Parts
More 2008 Freightliner Sprinter 2500 Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 2008 Freightliner Sprinter 2500, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 2008 Freightliner Sprinter 2500 Brake Parts
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA620903)
from
$24.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-74425)
from
$128.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH145431)
from
$81.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to prevent warping
- Air gap eliminates brake fade and increases pad life
- Non-Directional finish decreases break-in time
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD1317)
from
$45.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K8449)
from
$445.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.
Product Features:
See More
Product Features:
- This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
- PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Multi-Layer rubberized shims provide virtually noise-free braking
- Drilled & Slotted performance rotors provide maximum cooling
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Bolt-on upgrade for stock brakes, no modifications necessary
- Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
- Rotors are zinc plated for maximum protection against rust.
- Includes 2 Front & 4 Rear Sensor Wires
- Buy with confidence from the originator & industry leader of brake kits
PowerStop – Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z36 Truck And Tow (Part No.K6198-36)
from
$234.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z36 Truck & Tow Brake Upgrade Kit is recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. This brake pad and rotor kit comes with everything you need, including premium stainless-steel hardware, for an easy, bolt-on installation. The low-dust Ceramic brake pads are reinforced with Carbon-Fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Drilled & Slotted rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, get the easy and affordable, bolt-on performance upgrade with the Z36 Truck & Tow Brake Upgrade Kit.
Product Features:
See More
Product Features:
- This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks
- Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads
- Stainless-steel pad shims resist the increased temperatures common on heavy duty applications
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Drilled & Slotted performance rotors provide maximum cooling
- Bolt-on upgrade for stock brakes, no modifications necessary
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Rotors are zinc plated for maximum protection against rust.
- Brake rotors, pads & hardware engineered to work together to increase the overall braking power on vehicles with heavier loads
- Includes 4 Rear Sensor Wires
- Buy with confidence from the originator & industry leader of brake kits
Dorman – Help – Brake Caliper Bracket Bolts (Part No.14962)
from
$8.99
This disc brake caliper bracket mounting bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this disc brake caliper bracket mounting bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Wearever – Brake Rotor (Part No.YH145432)
from
$65.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.18-B4979)
from
$117.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.18-B4981)
from
$117.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Disc Brake Caliper Bracket (Part No.14-1263)
from
$40.99
Carquest Premium Coated Caliper Brackets are engineered and manufactured to meet or exceed OEM performance specifications for strength and durability. Complete inspection of all critical dimensions and bolt threads for a perfect fit and easy installation. OE style rust protective coatings ensure worry-free performance for miles top come.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Application-specific brackets for perfect fit and easy installation
- OE style rust protection extends product life
- Grease pack is included for easy installation
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14177)
from
$20.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41178)
from
$9.49
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Increases the life span of the brake pads
- Restores brakes to like-new performance
- Prevents noise and premature wear
- Direct replacement for a proper fit
Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.15156)
from
$8.29
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Increases the life span of the brake pads
- Restores brakes to like-new performance
- Prevents noise and premature wear
- Direct replacement for a proper fit
Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1226)
from
$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Wearever – Parking Brake Hardware Kit (Part No.H7352)
from
$27.49
Brakes are designed as a system and all the parts need to work together for best performance. Parking brakes hold the vehicle in place when the vehicle is parked. Because the parking brake is so important, you want to be sure all it’s hardware and components are in good shape.
Product Features:
See More
Product Features:
- Contains all the necessary hardware for easy installation
- Direct replacement for a perfect fit, form and function
- Corrosion resistant for long-lasting durability against harsh roads
- Manufactured with quality materials to restrain high tolerances
Carquest Wearever – Disc Brake Hardware Kit (Part No.H5815Q)
from
$18.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- Helps deliver a quieter, more efficient braking system
- Low-friction PTFE coating to reduce drag
- Manufactured with quality materials to suppress high stress levels
Bowa – Brake Pad Wear Sensor (Part No.N1030267577BOW)
from
$6.28
Bowa electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at Bowa make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.
Product Features:
See More
Product Features:
- Exact Replacement with OE Fittings and Connectors
- Highly Durable and Resistant to Temperatures
- Supplied with OE style electrical connectors
- Bowa is an OE supplier to Brake and Vehicle Manufacturers
Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1656)
from
$16.79
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.
Product Features:
See More
Product Features:
- Triggers a warning light on the dashboard
- Should be replaced each time the brake pad is replaced
- Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-1316)
from
$79.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
Product Features:
See More
Product Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Chamfered and slotted to ensure noise free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium stainless-steel hardware for easy installation
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD950)
from
$35.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Carquest Wearever – Parking Brake Shoes (Part No.S938)
from
$34.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.
Product Features:
See More
Product Features:
- Wearever Brake Shoes come bonded or riveted based on OE design.
- Wearever Brake Shoes are coated to prevent rust.
- Wearever Brake Shoes are 100% New not remanufactured.
- Brand may vary by location
Carquest Wearever – Parking Brake Shoes (Part No.S940)
from
$40.49
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.
Product Features:
See More
Product Features:
- Wearever Brake Shoes come bonded or riveted based on OE design.
- Wearever Brake Shoes are coated to prevent rust.
- Wearever Brake Shoes are 100% New not remanufactured.
- Brand may vary by location
Carquest Wearever – Parking Brake Shoes (Part No.S866)
from
$31.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.
Product Features:
See More
Product Features:
- Wearever Brake Shoes come bonded or riveted based on OE design.
- Wearever Brake Shoes are coated to prevent rust.
- Wearever Brake Shoes are 100% New not remanufactured.
- Brand may vary by location
Carquest Wearever – New Brake Master Cylinder: Without Reservoir, Exact Fit, 1" Bore (Part No.MCA630376)
from
$169.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
TRW – Brake Master Cylinde (Part No.N3000409459TRW)
from
$276.05
TRW Automotive supplies master cylinder brake actuation systems featuring quality and performance. TRW’s master cylinder product portfolio covers a wide range of vehicles, from small cars up to truck and SUV platforms. These systems can offer lighter weight, with options such as micro master cylinders and aluminum master cylinders through to heavy-duty master cylinders designed for the durability and variable loading conditions of the light-truck market. These systems function with the help of a series of brake fluid sensors, which are located on the reservoir tank. This series includes vacuum sensors, brake light switches, and travel sensors.
Product Features:
See More
Product Features:
- Low volume uptake
- High efficiency
- Low pressure differential between primary and secondary circuits
- Good bleedability
- Cr6-free surfaces for vehicles built from July 2007 (as required by law)
- Central valve version suitable for ABS
Carquest Wearever – New Brake Master Cylinder: Without Reservoir, Exact Fit, 1.063" Bore (Part No.MCA630516)
from
$297.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
Popular 2008 Freightliner Sprinter 2500 Brake Parts Categories
2008 Freightliner Sprinter 2500 Brake Parts
You count on your 2008 Freightliner Sprinter 2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 55 Brake Parts ranging in price from $8.99 to $483.99, you’re sure to find everything you need for your 2008 Freightliner Sprinter 2500.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 9 different brands like Carquest, Cardone, and Carquest Platinum Painted. 2008 Freightliner Sprinter 2500 Brake Parts start as low as $8.99!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 68 extensive product reviews on 2008 Freightliner Sprinter 2500 Brake Parts. Some of the top-rated Brake Parts products we carry are Brake Pads With Hardware, Better Performance, Longer Life, Quiet, Ideal For Towing with 3.5 stars and Semi-Metallic Brake Pads – (4-Pad Set) with 2.0 stars.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2008 Freightliner Sprinter 2500 below to get started!
Top-Rated Brake Parts Brands For Your 2008 Freightliner Sprinter 2500
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Freightliner Sprinter 2500 running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Carquest Platinum Painted, and even more.
Popular Cardone Brake Parts
You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 2008 Freightliner Sprinter 2500 back on the road. Some of the top-rated Cardone products in these categories are:
Top-Rated Carquest Wearever Brake Parts
If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 2008 Freightliner Sprinter 2500, and some of our most reviewed Carquest Wearever parts include:
FAQs for 2008 Freightliner Sprinter 2500 Brake Parts
What are the most purchased Brake Parts for the 2008 Freightliner Sprinter 2500?
Out of 55 Brake Parts for the 2008 Freightliner Sprinter 2500, the most popular in our inventory are:
from
$8.99
This product is not rated
Brake Caliper Bracket Bolts
Disc Brake Caliper Bracket Mounting Bolts
from
$103.99
This product is not rated
Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield
Front Brake Rotors
from
$105.99
(2)
Painted Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield
Rear Brake Rotors
What are the top-rated 2008 Freightliner Sprinter 2500 Brake Parts?
Top-rated Brake Parts for your 2008 Freightliner Sprinter 2500 based on customer reviews/ratings are:
from
$78.99
(4)
Brake Pads With Hardware, Better Performance, Longer Life, Quiet, Ideal For Towing
“Plenty of meat on these pads, came with the sensors in the box, big bonus!”
from
$66.99
(2)
Semi-Metallic Brake Pads – (4-Pad Set)
“The brake pads worked fine but the slot for the wear sensor was too small to fit the sensor so I had to take my Dremel tool out to make it work.”
