2008 Ford F53 Alternators and Starters

Essential 2008 Ford F53 Alternators and Starters

Motorcraft – Original Equipment (O.E.) Relay Assembly – Starter Motor (Part No.SW-5181)

Original Equipment (O.E.) Relay Assembly - Starter Motor

from

$42.49
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
  • Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
  • As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
See More

Carquest Premium – Multi Purpose Relay (Part No.SBC2105)

Multi Purpose Relay

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Starter Solenoid (Part No.S5060)

Starter Solenoid

from

$64.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our starter solenoids have more pure copper windings than found on most vehicles to create a stronger magnetic field
  • Our polyester-insulated magnet wire, cadmium-plated copper discs and solid contact bolts reduce voltage drop and deliver full battery power to the starter while providing greater protection against electrical overload
  • Pure copper battery terminal studs reduce resistance to permit higher current flow, even in the hottest environments, for better performance
  • We understand and expect the demand for quality, our starting and charging system products feature high grade materials for extended service life
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest – Starter Solenoid (Part No.S5047)

Starter Solenoid

from

$39.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our starter solenoids have more pure copper windings than found on most vehicles to create a stronger magnetic field
  • Our polyester-insulated magnet wire, cadmium-plated copper discs and solid contact bolts reduce voltage drop and deliver full battery power to the starter while providing greater protection against electrical overload
  • Pure copper battery terminal studs reduce resistance to permit higher current flow, even in the hottest environments, for better performance
  • We understand and expect the demand for quality, our starting and charging system products feature high grade materials for extended service life
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Motorcraft – Motorcraft Starter Solenoid (Part No.F5020673327MTR)

Motorcraft Starter Solenoid

from

$51.49
Motorcraft starter solenoids are the only solenoids recommended by Ford Motor Company to use in Ford and Lincoln vehicles.

Product Features:
  • Engineered to protect against flywheel and ring gear damage
  • One-piece compact extruded pinion and cam
  • Two-piece dust cover helps prevent dust and moisture intrusion
  • Specially designed spring for positive engagement
  • Available for most U.S. and import car, truck, farm, marine and industrial applications
See More

Carquest Premium – Starter Solenoid (Part No.SBC2133)

Starter Solenoid

from

$60.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better
See More

Carquest – Starter Solenoid Switch (Part No.S5049)

Starter Solenoid Switch

from

$25.49
Product Features:
  • Designed to OE standards for ease of installation
  • Contain more pure copper windings than found on most vehicles and create a stronger magnetic field in even the hottest environments for better performance.
  • Solenoids contain cadmium-plated copper discs and solid contact bolts reduce voltage drop to deliver full battery power to the starter and have pure copper battery terminal studs that reduce resistance and permit higher current flow.
See More

Carquest Standard – Starter Remanufactured Standard (Part No.3152SV)

Starter Remanufactured Standard

from

$67.99
Carquest Standard starters are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard starters are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest HD Electrical – Starter: New, 12V, 10 Tooth (Part No.72-3246N)

Starter: New, 12V, 10 Tooth

from

$140.99
Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are prime

Product Features:
  • High quality components form the foundation our parts are built from. Transpo’s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
  • Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
  • Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
  • Integrated magnetic switch provides protection against weak power from batteries.
  • Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
  • Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
See More

Carquest Professional – Starter-New (Part No.3225SN)

Starter-New

from

$207.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-10481
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

WAI – Starter – 100% NEW (Part No.19247N)

Starter - 100% NEW

from

$207.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components for the Rotating Electri

Product Features:
  • Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
  • Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
  • Armatures have precision machined and upgraded steel shaft for improved durability and performance.
  • Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
See More

Carquest Premium – Starter Remanufactured Premium (Part No.3225S)

Starter Remanufactured Premium

from

$171.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More

Bosch – Premium 100% Remanufactured Starter (Part No.SR7566X)

Premium 100% Remanufactured Starter

from

$195.99
Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability

Product Features:
  • Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
  • Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
  • Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
  • Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life
See More

Carquest Professional – Starter-New (Part No.6646SN)

Starter-New

from

$177.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-10538
See More

Carquest Professional – Alternator-New (Part No.7716-10AN)

Alternator-New

from

$183.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • All new components are utilized to ensure long service life
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
  • Rotors and stators are load tested and double insulated for maximum charging performance
See More

DENSO – Alternator (Part No.F4000688971ND)

Alternator

from

$230.26
DENSO alternators are not only original equipment on many of the world’s top production cars; they are a favorite in motorsports as well, where their light weight, high efficiency, and durability under the most gruelling conditions make them the natural choice. Remanufactured DENSO alternators go through a gruelling process: Stators and rectifiers are tested to 300 volts, while rotors are submitted to 600 volts, all to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-standard lubricants. New or remanufactured, a DENSO alternator is a quality component.

Product Features:
  • OE-Equivalent Direct Fit Application.
  • Remanufactured using only OE Components.
  • 29 performance and safety checks.
  • Subjected to rigorous safety and performance tests.
  • Tested to OE standards and re-packed with OE-grade lubricant.
  • Provides exceptional reliability.
See More

Carquest Professional – Alternator-New (Part No.8429AN)

Alternator-New

from

$226.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • All new components are utilized to ensure long service life
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • All units are 100% triple tested to ensure quality and performance
See More

Carquest Premium – Alternator Remanufactured Premium (Part No.8429A)

Alternator Remanufactured Premium

from

$184.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Alternator Remanufactured (Part No.7735-10A)

Alternator Remanufactured

from

$133.99
Carquest Premium Alternators and all components are thoroughly inspected and tested to meet or exceed manufacturer specifications. Every remanufactured unit is 100% performance tested from components through final assembly, to ensure dependable service an

Product Features:
  • Each unit is triple-tested to ensure quality and performance
  • All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
  • Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
See More

Carquest Professional – Alternator-New (Part No.7761AN)

Alternator-New

from

$209.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • All new components are utilized to ensure long service life
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
  • Rotors and stators are load tested and double insulated for maximum charging performance
See More

Carquest Premium – Alternator Remanufactured Premium (Part No.11649A)

Alternator Remanufactured Premium

from

$336.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More

Carquest Premium – Ignition Lock Cylinder CSC1201 (Part No.CSC1201)

Ignition Lock Cylinder CSC1201

from

$75.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Dorman – Ignition Lock Cylind (Part No.M5040961047DOR)

Ignition Lock Cylind

from

$24.56
Dorman Ignition Lock Cylinders are part of the Ignition Lock Assembly and failure is due to wear and tear from continual key rotation. The purpose of the Ignition Lock Cylinder is to provide a level of security that requires a coded metal Ignition Key in order for the vehicle Ignition Switch to be operated and energized, thereby allowing the vehicle to be started and operated.

Product Features:
  • Direct replacement and operation
  • Includes easy to follow instructions with no need for any specialized tools or equipment
  • Tumblers are included for optional rekeying, eliminating the need to carry 2 keys and reprogram a new anti-theft key
See More

Locksmart – Ignition Lock Cylinder (Part No.LC14060)

Ignition Lock Cylinder

from

$43.05
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:
  • Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
  • Constructed from high-grade materials to ensure durability and longevity
  • Undergoes 100% testing for proper fit, form, and function
  • As a global manufacturer, we maintain complete quality control throughout the manufacturing process
See More

Dorman – Help – Ignition Actuator – With Tilt Wheel (Part No.83280)

Ignition Actuator - With Tilt Wheel

from

$17.29
This steering column lock actuator is designed to match the appearance and function of the original actuator on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this steering column lock actuator is made to match the fit and performance of the original actuator on specific vehicle applications
  • Ideal solution – this actuator is a reliable replacement for an original part that has failed due to collision damage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Ignition Lock Cylind (Part No.M50401226054DOR)

Ignition Lock Cylind

from

$22.20
Dorman Ignition Lock Cylinders are part of the Ignition Lock Assembly and failure is due to wear and tear from continual key rotation. The purpose of the Ignition Lock Cylinder is to provide a level of security that requires a coded metal Ignition Key in order for the vehicle Ignition Switch to be operated and energized, thereby allowing the vehicle to be started and operated.

Product Features:
  • Direct replacement and operation
  • Includes easy to follow instructions with no need for any specialized tools or equipment
  • Tumblers are included for optional rekeying, eliminating the need to carry 2 keys and reprogram a new anti-theft key
See More

Carquest Premium – Ignition Lock Cylinder CSC1635 (Part No.CSC1635)

Ignition Lock Cylinder CSC1635

from

$44.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Motorcraft – Ignition Lock Cylinder: No Keys Included, Codeable (Part No.SW-6383)

Ignition Lock Cylinder: No Keys Included, Codeable

from

$93.99
Motorcraft Original Equipment Products are manufactured of premium-quality materials to strict Ford Engineering standards. Motorcraft Parts are designed and engineered for each application. The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
See More

2008 Ford F53 Alternators and Starters

You count on your 2008 Ford F53 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Alternators and Starters. With 18 Alternators and Starters ranging in price from $39.99 to $282.72, you’re sure to find everything you need for your 2008 Ford F53.

Brands matter. If you want to shop a specific Alternators and Starters brand, we stock 6 different brands like Carquest Premium, Carquest, and Carquest Professional. 2008 Ford F53 Alternators and Starters start as low as $39.99!

One of the best ways to find top quality OEM or aftermarket Alternators and Starters is by asking professionals. Short of that, you can shop with confidence thanks to our 644 extensive product reviews on 2008 Ford F53 Alternators and Starters. Some of the top-rated Alternators and Starters products we carry are Starter with 3.0 stars.

Did we mention you can order your Alternators and Starters from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Alternators and Starters inventory for your 2008 Ford F53 below to get started!

Top-Rated Alternators and Starters Brands For Your 2008 Ford F53

Trusted Alternators and Starters OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Ford F53 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Carquest, Carquest Professional, and even more.

Popular Carquest Alternators and Starters

You’ll find popular Carquest brand products across Starter Parts. All are waiting to get your 2008 Ford F53 back on the road. Some of the top-rated Carquest products in these categories are:
Starter Solenoid
from $39.99
(5)
Starter Solenoid
Starter Solenoids
Starter 6646SV: Remanufactured
from $116.99
(93)
Starter 6646SV: Remanufactured
Starters

Top-Rated Carquest Premium Alternators and Starters


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Alternators and Starters for your 2008 Ford F53, and some of our most reviewed Carquest Premium parts include:
Starter Remanufactured Premium
from $143.99
(213)
Starter Remanufactured Premium
Starters
Starter Remanufactured
from $133.99
(124)
Starter Remanufactured
Starters
Alternator Remanufactured Premium
from $184.99
(17)
Alternator Remanufactured Premium
Alternators

FAQs for 2008 Ford F53 Alternators and Starters

What are the most purchased Alternators and Starters for the 2008 Ford F53?

Out of 18 Alternators and Starters for the 2008 Ford F53, the most popular in our inventory are:
Starter-New
from $177.99
(111)
Starter-New
Starters
Starter-New
from $169.99
(73)
Starter-New
Starters
Alternator-New
from $226.99
(7)
Alternator-New
Alternators

What are the top-rated 2008 Ford F53 Alternators and Starters?

Top-rated Alternators and Starters for your 2008 Ford F53 based on customer reviews/ratings are:
Starter
from $278.75
(1)
Starter
“In the description it’s doesn’t tell you that this product is REMANUFACTURED ! I thought I was purchasing a brand new starter. In the end it was inst”