Name: Fuel Tank Cleaning Kit
Brand: Delphi
SKU: FC01
Price: 12.49 USD

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$34.49

The Evaporative Emission System is designed to control fuel vapors in the vehicle fuel storage system to prevent any release of fuel vapors into the atmosphere. In a normally operating system, released vapors from the fuel storage tank will be directed into an on-board charcoal canister via a piping system and control valves. Under the most ideal engine operating condition, the vapors will be pulled into the engine to be burned during the normal combustion process.

Product Features:

Application matched components ensure the vehicle will be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$110.07

The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft oxygen sensors are designed for maximum performance.

Product Features:

Same components used in the factory
Units come ready to plug and play, with no need for modifications
OE connectors and wire lengths
Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
Designed to help provide optimal performance and fuel economy
OE enhancements are included in the most current designs
Vehicle-specific coverage Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

from

$122.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

from

$69.99

Wire Assembly

from

$164.99

The Premium CarQuest® Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:

The Premium CarQuest® Vehicle Solutions line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.

from

$70.99

CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:

Lifecycle tested to meet or exceed OE specifications
Direct OE replacement
High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
Global coverage for import and/or domestic applications.

from

$29.99

This vacuum pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this vacuum pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$24.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$55.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
Direct fit ensures safe, secure fuel tank installation
Product individually packaged and labeled to help reduce product damage prior to installation
Industry leading coverage on straps for plastic tanks

from

$5.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$144.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$725.99

CARQUEST premium remanufactured high-pressure oil pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes pump gasket
Includes new quick-disconnect fittings that ensure a leak-free installation

from

$542.99

CARQUEST premium remanufactured Injector Driver Modules (IDM) for the Ford Power Stroke 7.3L are completely disassembled and all electronic components are tested. Faulty components are replaced with upgraded components, the case cover is replaced, the enclosure is powder coated and updated to prevent water intrusion, a common failure mode on the OE unit. Each unit is 100% tested under multiple operating conditions prior to shipment.

Product Features:

Each unit is 100% tested to OE specifications
No programming required
Upgraded module prevents common failure modes and water intrusion
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$322.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Fuel Injector Assembly consists of a cylindrical housing with an electric solenoid-controlled plunger valve mounted inside
When the solenoid is electrically actuated by the engine control module, the plunger valve opens, allowing fuel to reach the spray head that injects atomized fuel into the cylinder to be mixed with oxygen for combustion.
The resulting explosive air/fuel mixture is compressed by the upward moving piston and ignited by a spark plug or glow plug to power the engine.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into every Motorcraft Fuel Injector Assembly, ensuring the most current technology.
Motorcraft Fuel Injector Assemblies are built to last: corrosion resistant, pressure-tested and engineered to perform under extreme conditions and meet Ford’s exacting OE specifications, performance and quality standards.

from

$69.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$46.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$1066.99

The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles.

Product Features:

Helps ensure optimal performance and durability
Designed for long service life under harsh conditions in under-hood environment
Works with other vehicle sensors to deliver optimal fuel efficiency and emissions
Adherence to OE specs helps minimize repeat repairs and false Check Engine warnings
Design includes OE innovations and upgrades
100 percent coverage of Ford and Lincoln vehicles

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$58.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$64.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$15.29

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can result in combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

Original equipment fit, form and function

from

$129.99

F INJ TIME SNSR

from

$31.49

This diesel injection control pressure harness is designed to match the fit and function of the original harness on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this diesel injection control pressure harness is designed to match the fit and function of the original harness on specified applications
Ideal solution – this harness is a reliable replacement for an original harness that is missing, failed or damaged due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$10.29

The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$2.29

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$79.99

This replacement A/C vacuum actuator is engineered to match the fit and function of the original equipment vacuum actuator on specified vehicles. Made of quality materials, it’s designed for a reliable service life.

Product Features:

Ideal replacement – this A/C vacuum actuator directly replaces the original equipment actuator on specified vehicle years, makes and models
Durable construction – this vacuum actuator is made of quality materials for reliable performance
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit