2008 Chrysler PT Cruiser Transmission Parts

Essential Transmission Parts for 2008 Chrysler PT Cruisers

Carquest Premium – Automatic Transmission Gear Position Sensor (Part No.SAC3774)

Automatic Transmission Gear Position Sensor

from

$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

National – Bearings (Part No.A-18)

Bearings

from

$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Manual Transmission Output Shaft Seal (Part No.S-223535)

Manual Transmission Output Shaft Seal

from

$4.79
Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.8609)

Multi Purpose Seal

from

$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Gearshift Control Cable Assembly (Part No.924-711)

Gearshift Control Cable Assembly

from

$82.99
This automatic transmission shifter cable matches the fit and function of the original equipment cable to ensure a trustworthy repair. Made of quality materials, it has been extensively tested to ensure a long service life.

Product Features:
  • Direct replacement – this automatic transmission shifter cable matches the fit and function of the original equipment part.
  • Durable materials – this shifter cable is manufactured from quality materials for durability.
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance
See More

Anchor – Torque Strut Motor Mount: Right, 1 Piece (Part No.2948)

Torque Strut Motor Mount: Right, 1 Piece

from

$34.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 00-10; DODGE 00-05; PLYM 00-01;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2000-2010
  • Weight approx: 3 Lbs
  • COMPLETE MOUNT
  • PART GROUP: 2947, 2948
See More

Moveras – 41TE – Automatic Transmission (Part No.M01605)

41TE - Automatic Transmission

from

$1736.99
Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:
  • Product might not be available in all states due to local laws.
  • We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
  • Each Moveras transmission is produced in a World Class manufacturing facility
  • Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
  • Our transmissions are produced in a Clean Room environment
  • Every transmission is built to the same exacting stAndards by using a precisely documented And controlled process.
See More

FAG US – GENERAL SEAL (Part No.SS2412)

GENERAL SEAL

from

$11.49
GENERAL SEAL

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Maxi-Kool® XL Transmission Oil Cooler

from

$73.99
The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:
  • Imperial Maxi-Cool® plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 7-1/2″
  • Mid-size and full-size cars, pickups
  • GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
See More

Driveworks – Tapered Roller Bearing (Part No.S-JL-69349)

Tapered Roller Bearing

from

$8.29
Product Features:
  • Brand may vary by location
See More

Dorman – Automatic Transmission Pan (Part No.265-820)

Automatic Transmission Pan

from

$20.99
This automatic transmission case cover is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this automatic transmission case cover is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this cover is a reliable replacement for an original part that is missing or damaged.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

KAI – Trans Oil Cooler Assembly (Part No.CH4050103)

Trans Oil Cooler Assembly

from

$46.99
New Platinum Pro Automatic Transmission Oil Cooler Assembly, Without Turbo

Product Features:
  • Without Turbo
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Shift Cable Bushing Kit (Part No.14044)

Shift Cable Bushing Kit

from

$26.49
Fixing a broken manual transmission shift cable usually requires replacing the entire cable assembly. This Dorman OE FIX shift cable bushing kit saves expense by allowing the replacement of just the failed bushing.

Product Features:
  • Convenient solution – this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly.
  • Save time and money – save the expense and significant installation time of replacing an entire cable assembly
  • Ensure fit – two different kits for specified Dodge, Chrysler or Plymouth vehicles, one containing two bushings and one end, and the other containing one bushing and one retaining clip
  • Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
See More

FAG US – SHAFT SEAL (Part No.SS2565)

SHAFT SEAL

from

$23.99
SHAFT SEAL

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.CR85)

Automatic Transmission Remanufactured Torque Converter

from

$152.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:
  • Fluid Balanced
See More

Carquest Premium – Back Up Light Switch (Part No.SBA4502)

Back Up Light Switch

from

$36.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

National – Bearings (Part No.LM503349A)

Bearings

from

$22.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Shift Solenoid Pack (Part No.698-100)

Shift Solenoid Pack

from

$199.99
This automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles
  • Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
  • Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Oil Seal (Part No.S-3459)

Oil Seal

from

$7.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Carquest – Neutral Safety Switch (Part No.S26381)

Neutral Safety Switch

from

$39.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

ATP – AT SOLENOID GASKET (Part No.TG-31)

AT SOLENOID GASKET

from

$8.99
AT SOLENOID GASKET

ATP – AT TORQUE CONVT SEAL (Part No.TO-4)

AT TORQUE CONVT SEAL

from

$12.99
AT TORQUE CONVT SEAL

ATP – AT SPEED SENSOR (Part No.TE-8)

AT SPEED SENSOR

from

$29.99
AT SPEED SENSOR

Dorman – Trans Fitting M10 X 1.0 Threads (Part No.800-724)

Trans Fitting M10 X 1.0 Threads

from

$22.99
Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:
  • Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector.
  • Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability.
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
  • Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line
See More

Vemo – ABS Speed Sensor, w/ iSP-foil (Part No.N6030193353VMO)

ABS Speed Sensor, w/ iSP-foil

from

$96.11
The VEMO OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment. Developed for the anti-block braking system, wheel speed sensors send information to many on-board electronic systems. The rotational speed of the wheels is transmitted from the sensor to the control unit and from there to the transmission, engine, navigation and chassis control systems. This data is essential for ABS, ASR and ESP, to prevent blocking or wheel spin. Due to their versatile use, the sensors make a direct contribution to driving dynamics and safety. Moreover, driving comfort can be improved, fuel consumption reduced and emission levels decreased. Failure of the wheel speed sensors means an acute safety risk! The cause may be electrical or mechanical disruption, for example increased wheel bearing play, a broken wire or a corroded plug contact. With more than 670 different wheel speed sensors for vehicles of all the leading manufacturers, the quality brand VEMO offers a high-quality alternative.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Fuel consumption reduced and emission levels decreased
  • Protects electronics from static discharge.
  • Protects electronics against moisture.
  • Superior filtering function of oxygen.
See More

Energy Suspension – Transmission Mount (Part No.5.1105R)

Transmission Mount

from

$23.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:
  • Unique Safety Interlock Design
  • Impervious to Vehicle Oils and Chemicals
  • Strong Enough Too Handle High Performance
See More

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Ultra Grey RTV Gasket Maker (9.5 oz.)

from

$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:
  • Designed specially for high-torque and high vibration applications
  • Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
  • OEM specified
  • Low-odor, non-corrosive formula
  • Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
See More

Upgrade your 2008 Chrysler PT Cruiser with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2008 Chrysler PT Cruiser, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Transmission Parts are key to keeping your PT Cruiser functioning at its best. At Advance Auto Parts, we offer a wide selection of 79 Transmission Parts for the 2008 Chrysler PT Cruiser, designed to meet your needs without breaking the bank. From Automatic Transmission Pan and Gasket replacements to Automatic Transmission Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2008 Chrysler PT Cruiser at great prices. Our Transmission Parts inventory for this model ranges from just $4.79 to $2,000.99, with an average price of $90.49. Our 79 Transmission Parts in stock come from 21 trusted brands, so you’re sure to find the right part for your 2008 Chrysler PT Cruiser without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Chrysler PT Cruiser, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex, Imperial, National, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. Imperial and National also bring quality to the table, with Transmission Parts available starting at $9.29, and at an average 4 stars rating. With 4,121 customer reviews and counting, our 2008 Chrysler PT Cruiser Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Chrysler PT Cruiser is always ready to roll. We’re committed to providing you with everything you need to keep your PT Cruiser in top shape, all in one place. Start shopping confidently below for your 2008 Chrysler PT Cruiser!

Best-Selling Automatic Transmission Pan and Gaskets for 2008 Chrysler PT Cruisers

Enhance the driving experience in your Chrysler with 10 quality Automatic Transmission Pan and Gasket components, starting at $6.99.

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18687)

Transmission Oil Pan Gasket

from

$11.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Dorman – AT Oil Pan (Part No.J5030683694DOR)

AT Oil Pan

from

$47.28
AT Oil Pan

Dorman – Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart (Part No.265-801)

Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart

from

$33.99
This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:
  • Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
  • Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on testing to ensure a quality fit
See More

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

from

$16.99
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 90 minutes
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Ultra Grey RTV Gasket Maker (9.5 oz.)

from

$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:
  • Designed specially for high-torque and high vibration applications
  • Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
  • OEM specified
  • Low-odor, non-corrosive formula
  • Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
See More

ATP – AT OIL PAN GASKET (Part No.TG-102)

AT OIL PAN GASKET

from

$10.99
AT OIL PAN GASKET

Most Popular 2008 Chrysler PT Cruiser Automatic Transmission Parts

Customize your Chrysler with 11 Automatic Transmission Parts products like Transmission Solenoids, Automatic Transmission Case Covers, and Remanufactured Automatic Transmissions, all priced under $2,000.99.

Shift Pro by ETE – A604 Automatic Transmission Assembly (Part No.T150845)

A604 Automatic Transmission Assembly

from

$2000.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Shift Pro by ETE – A604 Automatic Transmission Assembly (Part No.T150846)

A604 Automatic Transmission Assembly

from

$2000.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Carquest – Automatic Transmission Control Solenoid (Part No.S9863)

Automatic Transmission Control Solenoid

from

$182.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Resistance and inductance matched to OE standards for proper fit, form and function.
  • Equipped with 100% copper winding for positive valve actuation on command.
  • Precision-machined mounting surface and included OE style gasket provide perfect sealing of the unit with the transmission case.
See More

ATP – Automatic Transmission Control Solenoid (Part No.TE-6)

Automatic Transmission Control Solenoid

from

$251.99
The TE-6 automatic transmission control solenoid is the nerve center of the transmission. If your transmission is not shifting correctly, the problem may be a faulty control solenoid. To properly service this part, it is necessary to clear related fault codes from the control module. ATP’s control solenoid is the highest quality replacement part available for the best price.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Easy to install
  • Fully tested
See More

Pro-King – Automatic Transmission Solenoid Block (Part No.52-0217)

Automatic Transmission Solenoid Block

from

$178.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Dorman – Shift Solenoid Pack (Part No.698-100)

Shift Solenoid Pack

from

$199.99
This automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles
  • Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
  • Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Automatic Transmission Pan (Part No.265-820)

Automatic Transmission Pan

from

$20.99
This automatic transmission case cover is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this automatic transmission case cover is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this cover is a reliable replacement for an original part that is missing or damaged.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Pro-King – Remanufactured Transmission Solenoid Block (Part No.RTS105)

Remanufactured Transmission Solenoid Block

from

$109.99
Remanufactured to meet or exceed OE quality, with inherent OE flaws corrected to improve longevity and performance.

Product Features:
  • All blocks are pretested
  • All blocks are serialized
See More

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBE4945)

Automatic Transmission Control Solenoid

from

$175.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Moveras – 41TE – Automatic Transmission (Part No.M01605)

41TE - Automatic Transmission

from

$1736.99
Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:
  • Product might not be available in all states due to local laws.
  • We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
  • Each Moveras transmission is produced in a World Class manufacturing facility
  • Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
  • Our transmissions are produced in a Clean Room environment
  • Every transmission is built to the same exacting stAndards by using a precisely documented And controlled process.
See More

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCA1168)

Automatic Transmission Control Solenoid

from

$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Top Picks for 2008 Chrysler PT Cruiser Transmission Mounts

Upgrade Chrysler PT Cruisers with top-quality Transmission Mounts parts, including 7 OEM and aftermarket selections for your 2008 model.

Anchor – Torque Strut Motor Mount: Front, 1 Piece (Part No.3169)

Torque Strut Motor Mount: Front, 1 Piece

from

$51.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 03-10; DODGE 03-03;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2003-2010
  • Weight approx: 5 Lbs
  • COMPLETE MOUNT
  • LARGE END: BOLT M14
  • SMALL END: OE STUD
See More

Anchor – Torque Strut Motor Mount: Front, 1 Piece (Part No.2949)

Torque Strut Motor Mount: Front, 1 Piece

from

$45.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 00-09; DODGE 00-05; PLYM 00-01;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2000-2009
  • Weight approx: 4 Lbs
  • COMPLETE MOUNT
  • LARGE END: BOLT M12
  • SMALL END: OE STUD
See More

Anchor – Torque Strut Motor Mount: Right, 1 Piece (Part No.2948)

Torque Strut Motor Mount: Right, 1 Piece

from

$34.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 00-10; DODGE 00-05; PLYM 00-01;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2000-2010
  • Weight approx: 3 Lbs
  • COMPLETE MOUNT
  • PART GROUP: 2947, 2948
See More

Energy Suspension – Transmission Mount (Part No.5.1105R)

Transmission Mount

from

$23.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:
  • Unique Safety Interlock Design
  • Impervious to Vehicle Oils and Chemicals
  • Strong Enough Too Handle High Performance
See More

Anchor – Transmission Mount: Left, 1 Piece (Part No.3179)

Transmission Mount: Left, 1 Piece

from

$49.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 03-08;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2003-2008
  • Weight approx: 3 Lbs
See More

Anchor – Transmission Mount: Left, 1 Piece (Part No.3512)

Transmission Mount: Left, 1 Piece

from

$87.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 06-10;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2006-2010
  • Weight approx: 4 Lbs
See More

Energy Suspension – Transmission Mount (Part No.5.1105G)

Transmission Mount

from

$24.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:
  • Unique Safety Interlock Design
  • Impervious to Vehicle Oils and Chemicals
  • Strong Enough Too Handle High Performance
See More

In-Demand Transmission Seals for 2008 Chrysler PT Cruisers

Select from 11 premium Transmission Seals parts for your 2008 Chrysler PT Cruiser, with prices ranging from $4.79 to $23.99.

National – Multi Purpose Seal (Part No.331228H)

Multi Purpose Seal

from

$15.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

ATP – AT SOLENOID GASKET (Part No.TG-31)

AT SOLENOID GASKET

from

$8.99
AT SOLENOID GASKET

Driveworks – Oil Seal (Part No.S-331228H)

Oil Seal

from

$9.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.3459)

Multi Purpose Seal

from

$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Oil Seal (Part No.S-3459)

Oil Seal

from

$7.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.8609)

Multi Purpose Seal

from

$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Manual Transmission Output Shaft Seal (Part No.S-223535)

Manual Transmission Output Shaft Seal

from

$4.79
Product Features:
  • Brand may vary by location
See More

FAG US – SHAFT SEAL (Part No.SS2565)

SHAFT SEAL

from

$23.99
SHAFT SEAL

SKF – Drive Axle Seal (Part No.J7043420879SKF)

Drive Axle Seal

from

$19.16
Drive Axle Seal

FAG US – SHAFT SEAL (Part No.SS2627)

SHAFT SEAL

from

$11.99
SHAFT SEAL

FAG US – GENERAL SEAL (Part No.SS2412)

GENERAL SEAL

from

$11.49
GENERAL SEAL

Most Sold 2008 Chrysler PT Cruiser Transmission Cooler and Parts

Explore our best-selling Chrysler parts for the 2008 PT Cruiser among 11 OEM and aftermarket options starting from $39.99.

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

High Performance Transmission Oil Cooler

from

$85.99
Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 10″ x 15-7/8″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Maxi-Kool® XL Transmission Oil Cooler

from

$73.99
The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:
  • Imperial Maxi-Cool® plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 7-1/2″
  • Mid-size and full-size cars, pickups
  • GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
See More

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty

from

$59.99
Product Features:
  • Imperial Rapid-Cool« plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 6″
  • Sub-compact to compact cars
  • GVWR up to 18,000 lbs.
  • Compatible with OEM cooler systems
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Econo-Kool® Transmission Oil Cooler

from

$54.99
Product Features:
  • Imperial Econo-Kool« tube and fin transmission cooler
  • Size: 3/4″ x 5″ x 15-7/8″
  • Compact and mid-size cars
  • GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Econo-Kool® Transmission Oil Cooler

from

$39.99
Product Features:
  • Imperial Econo-Kool« tube and fin transmission cooler
  • Size: 3/4″ x 5″ x 12-1/2″
  • Sub-compact to compact cars
  • GVWR up to 12,000 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty

from

$80.99
Product Features:
  • Imperial Rapid-Cool« plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 9-1/2″
  • Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
  • GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
  • 33% more efficient than a comparable tube and fin design
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Econo-Kool® Transmission Oil Cooler

from

$52.99
Product Features:
  • Mid-size and full-size cars, pickups
  • GVWR up to 18,000 lbs.; towing up to 3,500 lbs
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

High Performance Transmission Oil Cooler

from

$81.99
High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 15-7/8″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

High Performance Transmission Oil Cooler

from

$67.99
Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 12-1/2″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

KAI – Trans Oil Cooler Assembly (Part No.CH4050107)

Trans Oil Cooler Assembly

from

$85.99
New Platinum Pro Automatic Transmission Oil Cooler Assembly, With Turbo

Product Features:
  • With Turbo
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Trans Oil Cooler Assembly (Part No.CH4050103)

Trans Oil Cooler Assembly

from

$46.99
New Platinum Pro Automatic Transmission Oil Cooler Assembly, Without Turbo

Product Features:
  • Without Turbo
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Top-Rated Transmission Parts Brands For Your 2008 Chrysler PT Cruiser

Shop for the best-rated brands offering Transmission Parts and other products for your 2008 Chrysler PT Cruisers. Below you’ll find some of our best rated Transmission Parts from Permatex, Imperial, and National, and more. Transmission Parts from these brands that fit a 2008 PT Cruiser start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2008 Chrysler PT Cruiser Transmission Parts

When it comes to maintaining or upgrading your 2008 Chrysler PT Cruiser, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 2008 Chrysler PT Cruiser. With over 6 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $19.49. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge
from
$28.49
This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ
from
$16.99
This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

Ultra Grey RTV Gasket Maker (9.5 oz.)
from
$32.99
This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

Popular Imperial 2008 Chrysler PT Cruiser Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 2008 Chrysler PT Cruiser owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 2008 PT Cruiser, Advance Auto Parts carries a full inventory of 9 Imperial Transmission Parts. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Imperial Transmission Parts range from $39.99 to $85.99, plus, with more than 114 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

High Performance Transmission Oil Cooler
from
$67.99
This product is not rated

High Performance Transmission Oil Cooler

“”

High Performance Transmission Oil Cooler
from
$85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

Maxi-Kool® XL Transmission Oil Cooler
from
$73.99

(7)

Maxi-Kool® XL Transmission Oil Cooler

“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”

FAQs for 2008 Chrysler PT Cruiser Transmission Parts

Which Transmission Parts are best-sellers for 2008 Chrysler PT Cruisers?

Out of 79 Transmission Parts that fit 2008 Chrysler PT Cruisers, the following parts are the top sellers:

What’s the price range for 2008 Chrysler PT Cruiser Transmission Parts?

Transmission Part prices for the 2008 Chrysler PT Cruiser start at $4.79 and go up to $2,000.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2008 Chrysler PT Cruiser?

The average price for Transmission Parts for the 2008 Chrysler PT Cruiser is $90.49. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Chrysler PT Cruiser model years?

Yes, we currently carry Transmission Parts for 9 model years of Chrysler PT Cruisers between 2001 and 2010. Transmission Parts are bought most frequently for the following model years: 2010, 2009, 2007, 2006, 2005, 2004, 2003, 2002, and 2001.

What are the cheapest Transmission Parts for my 2008 Chrysler PT Cruiser?

The cheapest 2008 Chrysler PT Cruiser Transmission Parts we carry in stock are:

What are the top-rated Transmission Parts that fit the 2008 Chrysler PT Cruiser?

Out of 4,121 reviews by customers, our 2008 Chrysler PT Cruiser Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2008 Chrysler PT Cruiser and their top-rated products:

What types of Transmission Parts do you sell for my 2008 Chrysler PT Cruiser?

Can I get help with 2008 Chrysler PT Cruiser Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Transmission Parts and more.

What is your return policy for Chrysler PT Cruiser Transmission Parts?

Advance Auto Parts keeps returns simple. For new Chrysler PT Cruiser Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.