2008 Chrysler 300 Belts and Hoses

Below you will find various in-demand Chrysler Belts and Hoses, components and accessories for your 2008 300. Advance Auto Parts has popular 300 parts like Engine Cooling Hoses, Serpentine and V Belts, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other 300 model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2008 Chrysler 300 Belts and Hoses below and start saving instantly.

Popular 2008 Chrysler 300 Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Belt Tensioner Pulleys

Radiator Overflow Hoses

Fuel Hoses

Engine Oil Cooler Hoses

HVAC Heater Pipe Lines

Seal Pullers

V-Belts

Drive Belt Idler Assemblies

Essential Belts and Hoses for 2008 Chrysler 300s

from

$55.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability.
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models.
Complete replacement – hoses come with necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$50.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$57.99

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.19

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$7.79

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$3.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$108.89

Heater Hose

from

$25.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$74.14

Acc. Belt Idler Pull

from

$11.79

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$22.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$154.99

Litens is the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. This popular tensioner was designed for the V-6 Pentastar Chrysler engines, looks, fits, and performs as the original part being replaced. “O.E. Exact” – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part does not have the OE P/N on the part but it is identical in every way. Like the original design, this tensioner was designed with an “Active Pivot”. It has two springs, one for damping control that puts axial force on the damping bushing which enables the part to maintain continued constant damping throughout the useful life of the part and the other for torque output. The pulley for this part was also designed to the strictest roundness tolerances requiring a proprietary molding technique developed by Litens. The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. The internal damping design provides quiet, smooth, system performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit and performance.
Active Pivot
Pulley for this part was designed to the strictest roundness tolerances requiring a proprietary molding technology developed by the manufacturer.
The internal damping design provides quiet, smooth, system performance
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
Installation instructions included
Professional Mechanics will change this tensioner in approx. 20 minutes.

from

$75.99

This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$16.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$27.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$87.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$48.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$41.49

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$52.99

This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:

Trustworthy replacement – this fuel line safely replaces the original fuel line to fix fuel leaks.
Durable design – withstands tough underhood and undercar conditions
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Comprehensive solutions – this fuel line is part of a diverse collection of fuel line repair solutions

from

$29.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$24.99

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$2.49

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$16.79

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$36.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$19.79

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$20.29

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

Upgrade your 2008 Chrysler 300 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2008 Chrysler 300, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Belts and Hoses are key to keeping your 300 functioning at its best. At Advance Auto Parts, we offer a wide selection of 76 Belts and Hoses for the 2008 Chrysler 300, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2008 Chrysler 300 at great prices. Our Belts and Hoses inventory for this model ranges from just $2.49 to $169.82, with an average price of $45.77. Our 76 Belts and Hoses in stock come from 12 trusted brands, so you’re sure to find the right part for your 2008 Chrysler 300 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Chrysler 300, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Litens, Driveworks, and more. Dayco Belts and Hoses start at just $7.79 and boast an impressive 5 stars average rating from customers. Litens and Driveworks also bring quality to the table, with Belts and Hoses available starting at $21.99, and at an average 5 stars rating. With 2,443 customer reviews and counting, our 2008 Chrysler 300 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Chrysler 300 is always ready to roll. We’re committed to providing you with everything you need to keep your 300 in top shape, all in one place. Start shopping confidently below for your 2008 Chrysler 300!

Best-Selling Engine Cooling Hoses for 2008 Chrysler 300s

Enhance the driving experience in your Chrysler with 16 quality Engine Cooling Hose components, starting at $15.99.

show more show less

from

$16.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$27.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$38.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$25.89

Radiator Hose

from

$169.82

Heater Hose Set

from

$135.49

Heater Hose

from

$108.89

Heater Hose

from

$77.99

Radiator Hose

from

$58.72

Radiator Hose

from

$55.43

Radiator Hose

from

$39.99

Shock Kit

from

$36.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$35.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$17.96

Radiator Hose

from

$17.56

Radiator Hose

from

$15.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

Most Popular 2008 Chrysler 300 Serpentine and V Belts

Customize your Chrysler with 19 Serpentine and V Belts products like Serpentine Belts, Drive Belt Idler Assemblies, and V-Belts, all priced under $59.55.

show more show less

from

$50.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$35.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$29.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$31.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$49.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$41.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$53.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$24.99

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$50.16

Dayco, Drive Belt

from

$40.96

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$43.83

The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$53.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$48.49

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$32.56

Drive Belt

from

$41.11

Drive Belt

from

$59.55

ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Temperature-stable from -22F to 176F (30C to 80C).
Delivers over 98% power efficiency.
High performance construction.
Polychloroprene rubber cover and body.
Polyester fiber tensile members and a ribbed belt design.

from

$44.77

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$42.19

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

Top Picks for 2008 Chrysler 300 Belt Tensioners

Upgrade Chrysler 300s with top-quality Belt Tensioners parts, including 4 OEM and aftermarket selections for your 2008 model.

show more show less

from

$75.99

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$49.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
This tensioner is another Dayco product proudly made in the USA

from

$68.99

Litens was the Original Equipment (O.E.) supplier of this Chrysler/Dodge/Jeep/Ram tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner is designed with a molded locator pins on the base to ensure precise installation location as well as a heavy-duty polymer pulley. To assist with belt installation and removal, the tensioner arm has an integrated lift feature. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use round spring technology and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$78.95

Acc. Belt Tensioner

In-Demand Fuel Hoses for 2008 Chrysler 300s

Select from 1 premium Fuel Hoses parts for your 2008 Chrysler 300.

show more show less

from

$52.99

This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:

Trustworthy replacement – this fuel line safely replaces the original fuel line to fix fuel leaks.
Durable design – withstands tough underhood and undercar conditions
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Comprehensive solutions – this fuel line is part of a diverse collection of fuel line repair solutions

Most Sold 2008 Chrysler 300 Heater Hoses

Explore our best-selling Chrysler parts for the 2008 300 among 13 OEM and aftermarket options starting from $12.49.

show more show less

from

$16.79

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$12.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$51.99

Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability.
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models.
Complete replacement – hoses come with necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$18.29

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$55.99

Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability.
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models.
Complete replacement – hoses come with necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$18.29

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$57.99

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$126.99

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$62.99

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$137.99

Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability.
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models.
Complete replacement – hoses come with necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$12.49

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$24.49

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$14.79

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:

Resists electrochemical degradation and water permeation
Use with heater hose connectors and bulk heater hose to create custom assemblies
Compatible for coolant, air and water applications
EPDM tube and cover, synthetic fiber reinforcement
SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Caution: Do not use for fuel or oil transfer applications

Top-Rated Belts and Hoses Brands For Your 2008 Chrysler 300

Shop for the best-rated brands offering Belts and Hoses and other products for your 2008 Chrysler 300s. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Driveworks, and more. Belts and Hoses from these brands that fit a 2008 300 start at just $7.79 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2008 Chrysler 300 Belts and Hoses

When it comes to maintaining or upgrading your 2008 Chrysler 300, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2008 Chrysler 300. With over 27 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.79, with an average price of just $30.70. Plus, with over 706 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$22.99

This product is not rated

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.44" Diameter

“”

from
$18.29

This product is not rated

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length

“”

from
$18.29

This product is not rated

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length

“”

Popular Litens 2008 Chrysler 300 Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2008 Chrysler 300 owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2008 300, Advance Auto Parts carries a full inventory of 4 Litens Belts and Hoses. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Litens Belts and Hoses range from $21.99 to $68.99, plus, with more than 14 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$55.99

(7)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 63.5mm Diameter

“replaced older pulley, perfect fit”

from
$21.99

This product is not rated

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter

“”

from
$68.99

This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

FAQs for 2008 Chrysler 300 Belts and Hoses

Which Belts and Hoses are best-sellers for 2008 Chrysler 300s?

Out of 76 Belts and Hoses that fit 2008 Chrysler 300s, the following parts are the top sellers:

Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count (20060049) – $35.99
Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (5062861) – $31.99
Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (15130072) – $24.99

What’s the price range for 2008 Chrysler 300 Belts and Hoses?

Belts and Hose prices for the 2008 Chrysler 300 start at $2.49 and go up to $169.82 for the most premium parts.

What’s the average price of a Belts and Hose for a 2008 Chrysler 300?

The average price for Belts and Hoses for the 2008 Chrysler 300 is $45.77. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Chrysler 300 model years?

Yes, we currently carry Belts and Hoses for 35 model years of Chrysler 300s between 1955 and 2023. Belts and Hoses are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Belts and Hoses for my 2008 Chrysler 300?

The cheapest 2008 Chrysler 300 Belts and Hoses we carry in stock are:

Safety Stripe« Standard Straight Heater Hose (10504844) – $2.49
Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot) (10505007) – $3.99
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length (5197090) – $7.79
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11.75" Long, .63" Diameter (3320022) – $9.49
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 24 Inch Length (5371252) – $12.49

What are the top-rated Belts and Hoses that fit the 2008 Chrysler 300?

Out of 2,443 reviews by customers, our 2008 Chrysler 300 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2008 Chrysler 300 and their top-rated products:

Serpentine and V Belts
- Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (15130081) – $29.99
- Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (5062861) – $31.99
- Poly Rib Belt Serpentine Belt; 81.5 Long, 6 Rib Count (3340112) – $41.49
Belt Tensioners
- Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (15130081) – $29.99
- Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (5062861) – $31.99
- Poly Rib Belt Serpentine Belt; 81.5 Long, 6 Rib Count (3340112) – $41.49
Radiator Hoses
- Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (15130081) – $29.99
- Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (5062861) – $31.99
- Poly Rib Belt Serpentine Belt; 81.5 Long, 6 Rib Count (3340112) – $41.49

What types of Belts and Hoses do you sell for my 2008 Chrysler 300?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2008 Chrysler 300:

Can I get help with 2008 Chrysler 300 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Belts and Hoses and more.

What is your return policy for Chrysler 300 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Chrysler 300 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Chrysler 300 Belts and Hoses

Dorman – Molded Heater Hose: Steel/Rubber (Part No.626-320)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 65.4mm Dia., 26.6mm Width, 6 Grooves (Part No.89070)

Dorman – Engine Cooling Inlet Tube (Part No.626-547)

Driveworks – Automotive V-Belt (Part No.37513)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length (Part No.80411)

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot) (Part No.28412)

Gates – Heater Hose (Part No.R3030661411GAT)

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38018)

Gates – Acc. Belt Idler Pull (Part No.G6020661368GAT)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, 1.75" Diameter (Part No.C70287)

Gates – Premium Molded Coolant Hose (Part No.22943)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999933A)

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-006)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.50" Long, 1.50" Diameter (Part No.D70776)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.25" Diameter (Part No.E72341)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060840)

Driveworks – Poly Rib Belt Serpentine Belt; 81.5 Long, 6 Rib Count (Part No.815K6)

Yukon Gear – Seal Puller Tool (Part No.56063)

Dorman – FUEL LINE (Part No.904-027)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (Part No.89133)

Gates – Safety Stripe« Standard Straight Heater Hose (Part No.28409)

Dayco – Flex Radiator Hoses; EPDM Rubber, 12.25 Inch Long, 1.5 Inch Inner Dia. (Part No.81141)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.5" Long, 1.44" Diameter (Part No.E73048)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.22" Diameter (Part No.D72283)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.50" Diameter (Part No.C70624)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.44" Diameter (Part No.C72282)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.25" Diameter (Part No.E72341)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.5" Long, 1.38" Diameter (Part No.D72370)

Dayco – Radiator Hose (Part No.G2000570066DAY)

Dorman – Heater Hose Set (Part No.R30311697687DOR)

Gates – Heater Hose (Part No.R3030777844GAT)

Gates – Heater Hose (Part No.R3030661411GAT)

ContiTech – Radiator Hose (Part No.G2000416990CON)

Gates – Radiator Hose (Part No.G20001065700GAT)

ContiTech – Radiator Hose (Part No.G2000416989CON)

Suncore – Shock Kit (Part No.2-12S253600-001)

Gates – Premium Molded Coolant Hose (Part No.23454)

Gates – Premium Molded Coolant Hose (Part No.22955)

Dayco – Radiator Hose (Part No.G2000569857DAY)

Dayco – Radiator Hose (Part No.G2000975831DAY)

Gates – Premium Molded Coolant Hose (Part No.22940)

Dayco – Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count (Part No.5060840)

Driveworks – Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count (Part No.840K6)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Driveworks – Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (Part No.825K6)

Dayco – Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (Part No.5060825)

Driveworks – Poly Rib Belt Serpentine Belt; 81.5 Long, 6 Rib Count (Part No.815K6)

Dayco – Poly Rib Belt Serpentine Belt; 81.5 Long, 6 Rib Count (Part No.5060815)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (Part No.89133)

Dayco – Dayco, Drive Belt (Part No.W10001221485DAY)

Bando – Multi Rib (Serpentine) Belt (Part No.W1000117823BAN)

Yukon Gear – Seal Puller Tool (Part No.56063)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W1000335757MBL)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060815)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060840)

Bando – Drive Belt (Part No.W100081297BAN)

Bando – Drive Belt (Part No.W1000142803BAN)

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100036484CON)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100081297MBL)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W1000117823MBL)

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-006)

Dayco – Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89377)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999600A)

Dayco – Acc. Belt Tensioner (Part No.G6001216475DAY)

Dorman – FUEL LINE (Part No.904-027)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 10 Inch Length (Part No.88376)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 25 Inch Length (Part No.80414)

Dorman – Molded Heater Hose: Rubber, OE Fix, Upgraded Material (Part No.626-319)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length (Part No.88361)

Dorman – Molded Heater Hose: Steel/Rubber (Part No.626-320)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length (Part No.80413)

Dorman – Engine Cooling Inlet Tube (Part No.626-547)

Dorman – Engine Heater Hose Assembly (Part No.626-311)

Dorman – Engine Heater Hose Assembly (Part No.626-548)

Dorman – Molded Heater Hose: Aluminum/Rubber, OE Fix, Upgraded Material (Part No.626-586)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 24 Inch Length (Part No.86052)