2020 Chrysler 300 Belts and Hoses

Essential 2020 Chrysler 300 Belts and Hoses

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Gates – Premium Molded Coolant Hose (Part No.20355)

Premium Molded Coolant Hose

from

$31.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Coolant Hose (Part No.23454)

Premium Molded Coolant Hose

from

$36.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.5 Inch Inner Dia. (Part No.81171)

Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.5 Inch Inner Dia.

from

$20.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Gates – Premium Molded Coolant Hose (Part No.22942)

Premium Molded Coolant Hose

from

$22.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dorman – Engine Heater Hose Assembly (Part No.626-548)

Engine Heater Hose Assembly

from

$62.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Cooling Inlet Tube (Part No.626-547)

Engine Cooling Inlet Tube

from

$57.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Litens – O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 70 mm Diameter (Part No.900347A)

O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 70 mm Diameter

from

$21.99
This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, specifications and meets performance and durability requirements. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Dayco – Dayco, Acc. Belt Tension Pulley, Idler (Part No.G60111221076DAY)

Dayco, Acc. Belt Tension Pulley, Idler

from

$38.08
The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060827)

Micro-V« Serpentine Drive Belt

from

$48.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Driveworks – Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count (Part No.820K6)

Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count

from

$26.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 82.68 Long, 6 Rib Count (Part No.5060827)

Poly Rib Belt Serpentine Belt; 82.68 Long, 6 Rib Count

from

$49.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89377)

Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$49.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slip

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • This tensioner is another Dayco product proudly made in the USA
See More

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89632)

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$152.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • This tensioner is another Dayco product proudly made in the USA
See More

Dorman – Automatic Belt Tensioner (Part No.419-040)

Automatic Belt Tensioner

from

$172.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.66013)

Automotive V-Belt, Driveworks

from

$5.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.7270)

Automotive XL« High Capacity V-Belt

from

$24.79
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.7508)

Automotive XL« High Capacity V-Belt

from

$30.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 5 Inch Length (Part No.87905)

Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 5 Inch Length

from

$16.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot) (Part No.28412)

Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot)

from

$3.99
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Dorman – Molded Heater Hose: Rubber, OE Fix, Upgraded Material (Part No.626-335)

Molded Heater Hose: Rubber, OE Fix, Upgraded Material

from

$169.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability
  • Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
  • Complete replacement – hoses come with necessary clamps for easy installation
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 65.4mm Dia., 26.6mm Width, 6 Grooves (Part No.89070)

Serpentine Idler/Tensioner Pulley; Polymer, 65.4mm Dia., 26.6mm Width, 6 Grooves

from

$50.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Litens – O.E Quality Idler/Tensioner Pulley Direct Fit Thermoplastic 63.5 mm Diameter (Part No.900149A)

O.E Quality Idler/Tensioner Pulley Direct Fit Thermoplastic 63.5 mm Diameter

from

$55.99
This Litens pulley is manufactured by the original equipment pulley supplier to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Germany to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 63.5mm O.D. grooved pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Dorman – Idler/Tensioner Pulley: Specific Fit, Plastic, 70 mm Diameter (Part No.419-725)

Idler/Tensioner Pulley: Specific Fit, Plastic, 70 mm Diameter

from

$18.79
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:
  • Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
  • Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 18.75 Inch Long, 1.75 Inch Inner Dia. (Part No.81341)

Flex Radiator Hoses; EPDM Rubber, 18.75 Inch Long, 1.75 Inch Inner Dia.

from

$18.79
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 12.25 Inch Long, 1.5 Inch Inner Dia. (Part No.81141)

Flex Radiator Hoses; EPDM Rubber, 12.25 Inch Long, 1.5 Inch Inner Dia.

from

$16.79
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.22" Diameter (Part No.D72283)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.22" Diameter

from

$19.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

2020 Chrysler 300 Belts and Hoses

You count on your 2020 Chrysler 300 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 40 Belts and Hoses ranging in price from $12.80 to $172.99, you’re sure to find everything you need for your 2020 Chrysler 300.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 7 different brands like Dayco, Litens, and DriveWorks. 2020 Chrysler 300 Belts and Hoses start as low as $12.80!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 726 extensive product reviews on 2020 Chrysler 300 Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.44" Diameter with 4.9 stars and Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.44" Diameter with 5.0 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2020 Chrysler 300 below to get started!

Top-Rated Belts and Hoses Brands For Your 2020 Chrysler 300

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2020 Chrysler 300 running right for years to come. In our inventory you’ll find brands like Dayco, Litens, DriveWorks, and even more.

Popular Dorman Belts and Hoses

You’ll find popular Dorman brand products across Belt Tensioners. All are waiting to get your 2020 Chrysler 300 back on the road. Some of the top-rated Dorman products in these categories are:
Automatic Belt Tensioner (Tensioner Only)
from $75.99
(1)
Automatic Belt Tensioner (Tensioner Only)
Belt Tensioner Assemblies

Top-Rated Dayco Belts and Hoses


If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 2020 Chrysler 300, and some of our most reviewed Dayco parts include:
Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count
from $51.99
(32)
Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count
Serpentine Belts

FAQs for 2020 Chrysler 300 Belts and Hoses

What are the most purchased Belts and Hoses for the 2020 Chrysler 300?

Out of 40 Belts and Hoses for the 2020 Chrysler 300, the most popular in our inventory are:
Serpentine Belt Tensioner: 1 Piece
from $68.99
This product is not rated
Serpentine Belt Tensioner: 1 Piece
Belt Tensioner Assemblies
Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count
from $26.49
(26)
Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count
Serpentine Belts

What are the top-rated 2020 Chrysler 300 Belts and Hoses?

Top-rated Belts and Hoses for your 2020 Chrysler 300 based on customer reviews/ratings are:
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.44" Diameter
from $39.99
(15)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.44" Diameter
“It is for my 11 Chrysler 300C it saved me so much time and it was a perfect fit for my vehicles water pump replacement.”
O.E Quality Idler/Tensioner Pulley Direct Fit Thermoplastic 63.5 mm Diameter
from $55.99
(7)
O.E Quality Idler/Tensioner Pulley Direct Fit Thermoplastic 63.5 mm Diameter
“replaced older pulley, perfect fit”