2008 Chevrolet Silverado 3500 HD Towing Products

When the original trailer brake control module circuit board fails on certain General Motors vehicles, the dealer solution is to replace the entire trailer brake control module assembly. This Dorman OE FIX circuit board allows the direct replacement of only the failed circuit board, saving significant repair expense.

Product Features:

• Trailer Brake Control Switch – Circuit Board
• Trailer Brake Control Switch – Circuit Board – OE Fix
• Saves money – this direct-replacement trailer brake control module circuit board reduces repair cost by eliminating the need to replace entire failed module assembly
• Seamless installation – designed to precise specifications for an exact fit and performance that matches the original equipment circuit board

GM Genuine Parts Trailer Brake Controls are designed, engineered, and tested to rigorous standards, and are backed by General Motors. the brake controls signal a trailer’s brake system when the driver presses on the brake pedal and adjusts how much braking power is needed to stop the trailer. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

One Key Technology Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.

In the world of commercial towing, more is expected. A job cannot be completed if the equipment cannot handle the workload. That is why CURT developed the Commercial Duty class 5 trailer hitch. Constructed from steel and engineered for power, these class 5 hitches are designed to complement the towing power of full-size, commercial pickup trucks, including diesels and chassis cabs. They can easily handle a variety of oversize trailers, including toy and car haulers, livestock trailers, dumper trailers, large flatbed trailers, large boat trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component). This particular class 5 hitch features a gross trailer weight capacity of 20,000 lbs. and a tongue weight capacity of 2,700 lbs. It is designed to be a custom trailer hitch for certain years of the Chevy Silverado 3500, 3500 HD or 3500 Classic, Dodge Ram 3500, 4500 or 5500, GMC Sierra 3500, 3500 HD or 3500 Classic and Ram 3500, 4500 or 5500 (to verify your vehicle compatibility, see application info). All CURT Commercial Duty class 5 hitches feature a 2-1/2″ x 2-1/2″ receiver tube opening to accept the strongest of ball mounts and towing accessories. They are perfect for mounting standard ball mounts, pintle mounts, tow hooks and weight distribution hitches as well as winch mounts and cargo carriers. CURT class 5 tow hitches are protected by a co-curing of liquid A-coat and carbide black powder coat finish. They also mount with grade-8 hardware, included with each hitch.

Product Features:

• Rated to 20,000 lbs. gross trailer weight and 2,700 lbs. tongue weight
• Compatible with weight distribution hitch (20,000 lbs. WD / 2,700 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Constructed with a large, powerful main body
• Protected by a highly durable carbide powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Features wide safety chain openings for heavy-duty hooks
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

Reduce your installation time to minutes! Many of today’s tow vehicles come with an O.E.M. connector or harness wires under the dash. The 47685 simply splices onto the tow vehicle tow package supplied wires and then plugs into the Hopkins brake control to complete the install.

Product Features:

• Blunt cut wires allows for installation of any brake control
• 36 inch wire length
• For vehicles with a factory tow package
• Includes Step-By-Step Instructions And Diagrams

This trailer hitch plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this trailer hitch plug matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Add light mounts to your Dee Zee Aluminum or Steel Headache Rack or Rear Rack. With these convenient mounts that slide into the built in channel system, mounting your auxiliary lights is quick and easy. Several size options to meet your needs.

Product Features:

• Made From Rugged Steel
• Protective Gloss Black Powder Coat Finish
• Utilize The Accessory Channel On Aluminum Cab Racks
• Several Size Options To Meet Your Needs
• Made In USA

Westin Off-Road divisions MAX Winch Mounting System. Strong sturdy and field functional design for all your off-road recovery needs. Bolt on applications make mounting your Westin TMAX Winch a quick and easy task. Westins MAX Tow Hooks are designed to mount directly to your MAX Winch Mount Tray. Black Powdercoated sold 1 Tow Hook per package.

Product Features:

• Mounts Directly To Winch Tray
• Polished Stainless Steel
• No Drill Installation
• Easy Bolt On Installation
• Tow Hook Openings
• 14 Gauge .075 in.

Outfitting your pickup to tow a heavy-duty flatbed or livestock trailer is easy with CURT OEM puck system gooseneck safety chain anchors. Like our OEM puck system gooseneck balls, these safety chain anchors utilize the puck system built into certain pickup trucks today with the towing prep package. They feature a patented installation system, easily dropping into the truck bed pucks without any tools required. They feature heavy-duty forged steel construction with a durable carbide black powder coat finish, and they offer large safety chain loops to accept heavy-duty hooks. These particular OEM puck system gooseneck safety chain anchors are compatible with the puck system of select model years of the Chevrolet Silverado 2500 HD and 3500 HD, Ford F-250 and F-350 Super Duty, GMC Sierra 2500 HD and 3500 HD and Nissan Titan XD (see application info to verify fitment). The anchors can be purchased as a standalone item or as part of a complete kit (#60692) that also includes the OEM puck system gooseneck ball, a rubber hole cover and a durable storage case.

Product Features:

• Fits select Chevrolet, Ford, GMC and Nissan Titan XD puck systems
• Simple, drop-in installation eliminates the need for tools
• Wide loop openings accept large gooseneck safety chain hooks
• Forged steel anchors with durable carbide black powder coat finish

Original Equipment Manufacturer Style Replacement Side View Towing Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass is power adjustable and heated
• OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
• Manual folding for additional clearance
• Textured Black

CURT fixed ball gooseneck hitches are built to deliver all the towing power you need to tackle the demands of the job, without breaking the bank. When your day starts the moment you climb into the seat of that full-size 4×4 pickup, your towing equipment needs to be a reliable extension of your truck. CURT fixed ball gooseneck hitches are a permanent towing solution that offer reliable strength at an economical price. This CURT fixed ball hitch features an over-bed design, installing directly on top of your truck bed using CURT over-bed gooseneck installation brackets. It offers a gross trailer weight capacity up to 30,000 lbs. to allow you to tow whatever heavy-duty trailer you need, from point A to point B, whether a livestock trailer full of horses, a flatbed piled with building materials or a car hauler carrying a backhoe. This fixed ball gooseneck hitch also comes with a standard 2-5/16″ gooseneck trailer ball welded onto a thick 12″ x 12″ steel plate. The fixed design ensures the ball can never be loosened or stolen, increasing safety on the road and preventing theft. Also, to ensure that CURT fixed ball gooseneck hitches can indeed be called CURT hitches, we finish them in a durable carbide powder coat that provides the necessary protection against rust, wear and other everyday threats you meet off the beaten path. For the best quality and durability in gooseneck towing, CURT is the obvious choice. We carefully engineer, test and manufacture our gooseneck hitches to meet today’s safety standards and exceed all expectations. For a gooseneck hitch with all the quality of a CURT hitch and the economy to keep your wallet full, there is nothing like a CURT fixed ball gooseneck hitch.

Product Features:

• Accepts up to 30,000 lbs. GTW and 7,500 lbs. vertical load limit
• 2-5/16″ trailer ball fits all standard gooseneck trailers
• Permanently attached gooseneck ball eliminates theft and loss
• Protected by a highly durable carbide powder coat finish
• Reinforcement required to reach max gross trailer weight rating
• Safety chain hookup loops #66113 sold separately
• Assembled in USA
• Limited lifetime warranty (one-year finish, one-year parts)

A CURT gooseneck hitch is more than a necessary tool for towing; it is an integrated extension of your truck that allows you turn your 4×4 into the workhorse it was designed to be. Gooseneck hitches are stronger, tougher and more subtle than any other, and when quality craftsmanship and intelligent design become the fuel that drives a gooseneck hitch, you get a towing solution that leaves others lost for words. The CURT under-bed Double Lock EZr gooseneck hitch is strong, fast and easy to operate. It gets its name from the two locking pins that engage the trailer ball and hold it in place, giving you twice the security when towing especially heavy trailers. The Double Lock EZr mounts underneath your truck bed with compatible gooseneck installation brackets and provides a removable 2-5/16″ gooseneck trailer ball with a gross trailer weight capacity up to 30,000 lbs. and a tongue weight capacity of 7,500 lbs. Using the heavy-duty operating handle, the trailer ball can be unlocked and flipped over whenever necessary to allow full use of the truck bed. For easy one-person installation, the Double Lock EZr comes with the CURT-exclusive center locator. This simple installation tool inserts into the gooseneck trailer ball hole during installation and shows exactly where to drill in the truck bed, eliminating errors and the need for meticulous measuring. The Double Lock EZr also comes with solid safety chain hookups, an attractive chrome trim ring, a durable carbide powder coat finish and a limited lifetime warranty.

Product Features:

• One-person installation requires no welding or truck bed removal
• Center locator eliminates the need to measure where the ball hole should be
• Double locking pins for superior trailer and trailer ball security
• Flip-and-store ball keeps truck bed free of obstructions
• Removable chrome-plated 2-5/16″ trailer ball fits most gooseneck trailers
• Chrome-plated trim ring provides a finished look
• Rubber hole cover helps prevent corrosion in trailer ball hole
• Heavy-duty 3/8″ diameter handle for solid operation

When the original trailer brake control module circuit board fails on certain General Motors trucks, you usually have to replace the entire module. This Dorman OE FIX circuit board allows direct replacement of only the failed board, saving money.

Product Features:

• Trailer Brake Control Switch – Circuit Board
• Trailer Brake Control Switch – Circuit Board
• When the original trailer brake control module circuit board fails on certain General Motors trucks, you usually have to replace the entire module. This Dorman OE FIX circuit board allows direct replacement of only the failed board, saving money.
• Simplified replacement – this trailer brake control switch circuit board directly replaces a burnt out module circuit board
• Saves money – this unique solution reduces repair cost by eliminating need to replace entire module

Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.

Product Features:

• Mounts To Front Of Vehicle
• Can Be Permanent Or Detachable
• Free spooling; Mechanical Lock
• Sealed Against Elements; Can Be Used Under Water
• Stainless Steel Tie Bars And Fasteners
• Reversible Mounting
• Limited Warranty

Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.

Product Features:

• Mounts To Front Of Vehicle
• Can Be Permanent Or Detachable
• Free spooling; Mechanical Lock
• Sealed Against Elements; Can Be Used Under Water
• Stainless Steel Tie Bars And Fasteners
• Reversible Mounting
• Limited Warranty

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

GM Genuine Parts Trailer Tow Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays function as an electro-mechanical switch containing a coil and set of connection points. These trailer tow relays provide a variety of control functions for a vehicle’s trailer brake system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

There is nothing like the luxury and power that go along with heavy-duty towing. 5th wheel RVs offer a deluxe, home-away-from-home experience unlike any other, while gooseneck trailers possess a strength that far surpasses most other trailer options. As with any trailer, however, 5th wheels and goosenecks must be equipped with the proper lighting and electrical systems, and tend to require even more complex connectors than a standard receiver-type trailer setup. Make things simple with a CURT 5th wheel / gooseneck extension harness. These wiring harnesses are designed to put an extra connector socket in the bed of your pickup truck while still retaining power to the rear connector socket mounted on your bumper or trailer hitch. This is done by plugging into the back of the existing original equipment (OEM) harness and routing through the body of the truck to a hole in the truck bed, providing a connector that is ready to accommodate your 5th wheel or gooseneck trailer. These CURT extension harnesses are designed to work with 7-way RV blade connectors and come with 7′ of wire. Ten harnesses are included in each package. They are compatible with certain models of Chevrolet, Dodge, Ford, GMC, Nissan, Ram and Toyota (see application to verify fitment). When you need a towing electrical solution that allows you to switch back and forth between your receiver hitch and specialized trailer hitch, CURT gets you plugged in.

Product Features:

• Routes a 7-way RV blade socket into truck bed while retaining use of rear socket
• Simple plug-and-play design eliminates the need for cutting or splicing
• Allows for easy connection of 5th wheel or gooseneck wiring
• 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
• 7′ extension with right-angle plugs for easy installation
• Spring-loaded dust cover keeps connector clean when not in use
• Slit loom keeps wires contained and well protected

There is nothing like the luxury and power that go along with heavy-duty towing. 5th wheel RVs offer a deluxe, home-away-from-home experience unlike any other, while gooseneck trailers possess a strength that far surpasses most other trailer options. As with any trailer, however, 5th wheels and goosenecks must be equipped with the proper lighting and electrical systems, and tend to require even more complex connectors than a standard receiver-type trailer setup. Make things simple with a CURT 5th wheel / gooseneck extension harness. These wiring harnesses are designed to put an extra connector socket in the bed of your pickup truck while still retaining power to the rear connector socket mounted on your bumper. This is done by plugging into the back of the existing original equipment (OEM) harness and routing through the body of the truck to a hole in the truck bed, providing a connector that is ready to accommodate your 5th wheel or gooseneck trailer. This CURT extension harness is designed to work with 7-way RV blade connectors and comes in a length of 10′. It is compatible with certain models of Chevrolet, Dodge, Ford, GMC, Nissan, Ram and Toyota (see application to verify fitment). When you need a towing electrical solution that allows you to switch back and forth between your receiver hitch and specialized trailer hitch, CURT gets you plugged in.

Product Features:

• Routes a 7-way RV blade socket into truck bed while retaining use of rear socket
• Simple plug-and-play design eliminates the need for cutting or splicing
• Allows for easy connection of 5th wheel or gooseneck wiring
• 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
• 10′ extension with right-angle plug for easy installation
• Spring-loaded dust cover keeps connector clean when not in use
• Slit loom keeps wires contained and well protected

Gives safe and easy access to the side and top rack of any service truck where exterior tool boxes are used. This step fits commercial, industrial, utility, fire prevention and service trucks that have service truck side tool boxes with flat bottoms or a flat platform area that has access to both sides of the mounting area.

Product Features:

• Large 24 Inch Or 12 Inch Non Skid Cast Step For Increased Safety
• Conveniently Tucked Away When Not In Use
• Interior Steel Straps For Additional Strength
• When Pulled Out Both Feet Fit On The Step
• Fully Assembled
• Easy To Install
• Hands Free

Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
• Strongest And Easy Installation

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 2500 HD, 2500 HD Classic, 3500, 3500 HD or 3500 Classic and GMC Sierra 2500 HD, 2500 HD Classic, 3500, 3500 HD or 3500 Classic (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
• Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 2500 HD, 2500 HD Classic, 3500, 3500 Classic or 3500 HD and GMC Sierra 2500 HD, 2500 HD Classic, 3500, 3500 Classic or 3500 HD (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 8,000 lbs. GTW and 800 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 12,000 lbs. WD and 1,200 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 8,000 lbs. gross trailer weight and 800 lbs. tongue weight
• Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:

• Plugs into USCAR socket to provide 4-way and 6-way trailer wiring connectors
• Fits USCAR-equipped vehicles with factory tow plugs only
• Simple plug-and-play design eliminates the need for cutting or splicing
• 4-way flat output connects tail lights, brake lights and turn signals
• 6-way round socket adds connection for electric brakes and auxiliary power
• Dust covers included to keep connectors clean when not in use
• Slit loom keeps wires contained and well protected
• Metal bracket securely mounts wiring to the vehicle or trailer hitch

Husky Towing Products offers a complete line of hitches, brake assemblies, jacks, sway control solutions, and essential towing accessories. Each Husky product is precision engineered, constructed with durable, quality materials, and is rigorously tested to industry safety standards. Hitches are what Husky does best. From Class III receivers, to 5th wheels, to weight distribution hitches, Husky hitches help keep your towables safe and secure. Husky also offers accessories to accompany your hitch including hitch balls, shanks, locks, and more Electric tongue jacks, electrical and brake products, and cargo carriers are just a few other categories that make any towing experience easier.

Product Features:

• Connects To Your Vehicle OEM Tow Package Connector
• Easy-Open, Weatherproof Lid With Rugged, Oversized Hinge Allows Lid To Open 180 Degrees
• Impact And Corrosion Resistant
• Plug-In Simple(R) , No Cutting, No Splicing, Saves Time

A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Chevy Silverado 2500 HD or 3500 HD and GMC Sierra 2500 HD or 3500 HD (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:

• Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
• Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
• Engineered with a vehicle-specific design for a custom fit
• Provides a convenient mount for hitch accessories
• Ideal for attaching a snow plow, cargo carrier or other front hitch mount
• Allows for easy maneuvering of a trailer into a tight spot
• Concealed main body for OE look and seamless integration with the vehicle
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning

Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.

Product Features:

• Manufactured With A Vehicle-Specific Design For A Custom Fit
• Precisely-Welded For Superior Strength And Fit
• Co-Cured In A Rust-Resistant Liquid Bonderite Coating
• Strengthened With A Welded, Seamless Collar
• Open-Back Receiver For Easy Cleaning

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 2500 HD, 2500 HD Classic, 3500, 3500 HD or 3500 Classic and GMC Sierra 2500 HD, 2500 HD Classic, 3500, 3500 HD or 3500 Classic (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
• Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)