2008 Chevrolet HHR Transmission Parts

Essential Transmission Parts for 2008 Chevrolet HHRs

Mahle – AT Pan Gasket (Part No.J5040366469MAH)

AT Pan Gasket

from

$64.64
AT Pan Gasket

National – Multi Purpose Seal (Part No.4072N)

Multi Purpose Seal

from

$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Taper Bearing Set (Part No.S-30206)

Taper Bearing Set

from

$12.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Maxi-Kool® XL Transmission Oil Cooler

from

$73.99
The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:
  • Imperial Maxi-Cool® plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 7-1/2″
  • Mid-size and full-size cars, pickups
  • GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
See More

Carquest Premium – Back Up Light Switch (Part No.SBA1438)

Back Up Light Switch

from

$28.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – GM Original Equipment Transmission Control Module- Remanufactured (Part No.J2503576976ACD)

GM Original Equipment Transmission Control Module- Remanufactured

from

$226.37
An ACDelco GM Original Equipment Transmission Control Module is a GM-recommended replacement for your vehicle’s original component. It controls shifting in your vehicle if it has an automatic transmission. This original equipment transmission control module has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information or equivalent describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM71CW)

Automatic Transmission Remanufactured Torque Converter

from

$171.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:
  • Fluid Balanced
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Dorman – Remanufactured Transmission Control Module (Part No.599-120)

Remanufactured Transmission Control Module

from

$149.99
This remanufactured transmission control module has been thoroughly tested to offer the same function and performance as the stock component – electronically controlling the vehicle’s automatic shifting – for far less than replacement at the dealer.

Product Features:
  • Remanufactured Transmission Control Module.
  • Remanufactured Transmission Control Module.
  • This remanufactured transmission control module has been thoroughly tested to offer the same function and performance as the stock component – electronically controlling the vehicle’s automatic shifting – for far less than replacement at the dealer.
  • Ideal replacement – this remanufactured transmission control module provides the same function and performance of the stock TCM
  • Cost-effective fix – module is equally compatible as original but far less expensive than replacement from dealership
See More

SKF – AT Output Shaft Seal (Part No.J2557571115SKF)

AT Output Shaft Seal

from

$25.42
AT Output Shaft Seal

Mahle – Oil Dipstick Seal (Part No.A1120666332MAH)

Oil Dipstick Seal

from

$2.62
Oil Dipstick Seal

Dorman – Help – Transfer Case Shifter Bushing (Part No.14797)

Transfer Case Shifter Bushing

from

$15.79
These replacement automatic transmission shift lever control rod bushings have been made to match the function and performance of the original bushings on select vehicle years, makes and models.

Product Features:
  • Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles.
  • Conveniently fix- simple solution to address worn bushings and restore original performance and feel
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Imperial – Transmission Fitting Kit (Part No.240397)

Transmission Fitting Kit

from

$27.49
Product Features:
  • Transmission line fitting kit
  • GM snap-in-style lines
  • Helps simplify transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
  • Crafted from high-quality material that makes it durable and longer-lasting
  • A high quality, direct fit OE replacement
  • Easily connects the transmission cooler line to the cooler hose
  • Precision machined
See More

Driveworks – Taper Bearing Set (Part No.S-30208)

Taper Bearing Set

from

$17.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

FAG US – SHAFT SEAL (Part No.SS2114)

SHAFT SEAL

from

$7.49
SHAFT SEAL

ACDelco – Automatic Transmission Solenoid (Part No.J4006209907ACD)

Automatic Transmission Solenoid

from

$82.39
ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda. ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and After sales, a division of General Motors.
See More

Dorman – Transmission Oil Cooler Line (Part No.624-348)

Transmission Oil Cooler Line

from

$65.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:
  • Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
  • Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Transmission Oil Cooler Seal (Part No.66998)

Transmission Oil Cooler Seal

from

$15.99
This Dorman Automatic Transmission Oil Cooler Gasket eliminates leaks where the oil cooler line connects to the transmission. Gasket may break down over time, causing leaks, and should be replaced any time the oil cooler line and transmission are separated.

Product Features:
  • Durable construction – rubber over steel construction creates a positive seal and retains its shape.
  • Direct replacement – fits and functions like original equipment
  • Easy to install – direct-fit, no special tools required
  • Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
See More

Felpro – Automatic Transmission Valve Body Cover Gasket (Part No.TOS 18716)

Automatic Transmission Valve Body Cover Gasket

from

$45.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

ACDelco – Black Multi-Purpose Relay (Part No.D1780C)

Black Multi-Purpose Relay

from

$16.49
ACDelco GM Original Equipment Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ATP – AT SEAL DRIVE AXLE (Part No.XO-16)

AT SEAL DRIVE AXLE

from

$19.99
AT SEAL DRIVE AXLE

National – Multi Purpose Seal (Part No.5693)

Multi Purpose Seal

from

$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40°F to 400°F / -40°C to 204°C
  • Excellent high temperature capabilities
  • Compatible with wide range of fluids
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart (Part No.265-809)

Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart

from

$66.99
This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:
  • Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
  • Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on testing to ensure a quality fit
See More

Pro-King – Automatic Transmission Deluxe Rebuild Kit (Part No.KS-87)

Automatic Transmission Deluxe Rebuild Kit

from

$487.99
One of the most complete rebuild kits in the automatic transmission industry today. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:
  • Include steels, frictions, gaskets, and filter
  • Includes Band and Modulator (if applicable)
See More

Driveworks – Oil Seal (Part No.S-4072N)

Oil Seal

from

$5.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Dorman – AT Oil Pan (Part No.J5030577048DOR)

AT Oil Pan

from

$105.35
AT Oil Pan

Carquest Premium – Vehicle Speed Sensor (Part No.SNA1262)

Vehicle Speed Sensor

from

$76.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Automatic Transmission Speed Sensor (Part No.SBA3685)

Automatic Transmission Speed Sensor

from

$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Upgrade your 2008 Chevrolet HHR with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2008 Chevrolet HHR, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Transmission Parts are key to keeping your HHR functioning at its best. At Advance Auto Parts, we offer a wide selection of 89 Transmission Parts for the 2008 Chevrolet HHR, designed to meet your needs without breaking the bank. From Transmission Cooler and Part replacements to Transmission Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2008 Chevrolet HHR at great prices. Our Transmission Parts inventory for this model ranges from just $2.49 to $2,023.99, with an average price of $124.12. Our 89 Transmission Parts in stock come from 21 trusted brands, so you’re sure to find the right part for your 2008 Chevrolet HHR without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Chevrolet HHR, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex, Imperial, National, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. Imperial and National also bring quality to the table, with Transmission Parts available starting at $6.99, and at an average 4 stars rating. With 2,084 customer reviews and counting, our 2008 Chevrolet HHR Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Chevrolet HHR is always ready to roll. We’re committed to providing you with everything you need to keep your HHR in top shape, all in one place. Start shopping confidently below for your 2008 Chevrolet HHR!

Best-Selling Transmission Cooler and Parts for 2008 Chevrolet HHRs

Enhance the driving experience in your Chevrolet with 10 quality Transmission Cooler and Part components, starting at $39.99.

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

High Performance Transmission Oil Cooler

from

$85.99
Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 10″ x 15-7/8″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Maxi-Kool® XL Transmission Oil Cooler

from

$73.99
The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:
  • Imperial Maxi-Cool® plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 7-1/2″
  • Mid-size and full-size cars, pickups
  • GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
See More

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty

from

$59.99
Product Features:
  • Imperial Rapid-Cool« plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 6″
  • Sub-compact to compact cars
  • GVWR up to 18,000 lbs.
  • Compatible with OEM cooler systems
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Econo-Kool® Transmission Oil Cooler

from

$54.99
Product Features:
  • Imperial Econo-Kool« tube and fin transmission cooler
  • Size: 3/4″ x 5″ x 15-7/8″
  • Compact and mid-size cars
  • GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Econo-Kool® Transmission Oil Cooler

from

$39.99
Product Features:
  • Imperial Econo-Kool« tube and fin transmission cooler
  • Size: 3/4″ x 5″ x 12-1/2″
  • Sub-compact to compact cars
  • GVWR up to 12,000 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty

from

$80.99
Product Features:
  • Imperial Rapid-Cool« plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 9-1/2″
  • Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
  • GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
  • 33% more efficient than a comparable tube and fin design
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Econo-Kool® Transmission Oil Cooler

from

$52.99
Product Features:
  • Mid-size and full-size cars, pickups
  • GVWR up to 18,000 lbs.; towing up to 3,500 lbs
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

High Performance Transmission Oil Cooler

from

$81.99
High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 15-7/8″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

High Performance Transmission Oil Cooler

from

$67.99
Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 12-1/2″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

Dorman – Transmission Oil Cooler Line (Part No.624-348)

Transmission Oil Cooler Line

from

$65.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:
  • Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
  • Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Most Popular 2008 Chevrolet HHR Transmission Mounts

Customize your Chevrolet with 7 Transmission Mounts products like Transmission Mounts, all priced under $119.99.

Anchor – Transmission Mount: Rear Left, 1 Piece (Part No.3086)

Transmission Mount: Rear Left, 1 Piece

from

$75.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 05-11; PONT 05-10; SATURN 03-07;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2003-2011
  • Weight approx: 2 Lbs
See More

Anchor – Transmission Mount: Front Left, 1 Piece (Part No.3081)

Transmission Mount: Front Left, 1 Piece

from

$119.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 05-11; PONT 05-10; SATURN 05-07;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2005-2011
  • Weight approx: 3 Lbs
See More

Anchor – Transmission Mount: Left, 1 Piece (Part No.3291)

Transmission Mount: Left, 1 Piece

from

$86.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 05-11; PONT 05-10; SATURN 05-07;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2005-2011
  • Weight approx: 3 Lbs
See More

Autopart International Inc – Transmission Mount (Part No.J60003156834API)

Transmission Mount

from

$90.11
Transmission Mount

Anchor – Transmission Mount: Front Left, 1 Piece (Part No.3451)

Transmission Mount: Front Left, 1 Piece

from

$87.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 05-11; PONT 05-10; SATURN 05-07;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2005-2011
  • Weight approx: 3 Lbs
See More

Anchor – Transmission Mount: Left, 1 Piece (Part No.3459)

Transmission Mount: Left, 1 Piece

from

$52.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 05-11; PONT 05-10; SATURN 03-07;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2003-2011
  • Weight approx: 4 Lbs
See More

Autopart International Inc – Transmission Mount (Part No.J60002068263API)

Transmission Mount

from

$29.99
Transmission Mount

Top Picks for 2008 Chevrolet HHR Automatic Transmission Parts

Upgrade Chevrolet HHRs with top-quality Automatic Transmission Parts parts, including 18 OEM and aftermarket selections for your 2008 model.

ATP – Shift Solenoid (Part No.JE-54)

Shift Solenoid

from

$43.99
Shift Solenoid

GM Genuine Parts – Transmission Control Module (Part No.24252114)

Transmission Control Module

from

$174.99
GM Genuine Parts Transmission Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules help control shifting in vehicles with automatic transmissions. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ATP – AT CONTR SOLENOID (Part No.JE-8)

AT CONTR SOLENOID

from

$66.99
AT CONTR SOLENOID

Delphi – Auto Trans Control Solenoid (Part No.SL10019)

Auto Trans Control Solenoid

from

$31.49
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part

Product Features:
  • Ensures proper fit, form, and function
  • Developed with premium components and durable materials
  • Designed to meet or exceed OE requirements
See More

Dorman – Remanufactured Transmission Control Module (Part No.599-120)

Remanufactured Transmission Control Module

from

$149.99
This remanufactured transmission control module has been thoroughly tested to offer the same function and performance as the stock component – electronically controlling the vehicle’s automatic shifting – for far less than replacement at the dealer.

Product Features:
  • Remanufactured Transmission Control Module.
  • Remanufactured Transmission Control Module.
  • This remanufactured transmission control module has been thoroughly tested to offer the same function and performance as the stock component – electronically controlling the vehicle’s automatic shifting – for far less than replacement at the dealer.
  • Ideal replacement – this remanufactured transmission control module provides the same function and performance of the stock TCM
  • Cost-effective fix – module is equally compatible as original but far less expensive than replacement from dealership
See More

ACDelco – Automatic Transmission Solenoid (Part No.J4006209907ACD)

Automatic Transmission Solenoid

from

$82.39
ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda. ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and After sales, a division of General Motors.
See More

ACDelco – GM Original Equipment Transmission Control Module- Remanufactured (Part No.J2503576976ACD)

GM Original Equipment Transmission Control Module- Remanufactured

from

$226.37
An ACDelco GM Original Equipment Transmission Control Module is a GM-recommended replacement for your vehicle’s original component. It controls shifting in your vehicle if it has an automatic transmission. This original equipment transmission control module has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information or equivalent describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Transmission Shift Interlock Solenoid (Part No.924-982)

Transmission Shift Interlock Solenoid

from

$109.99
This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles.
  • Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current.
  • Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280225)

4T45E Automatic Transmission Assembly

from

$2023.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280231)

4T45E Automatic Transmission Assembly

from

$2023.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280236)

4T45E Automatic Transmission Assembly

from

$2023.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280232)

4T45E Automatic Transmission Assembly

from

$2023.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280230)

4T45E Automatic Transmission Assembly

from

$2023.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280235)

4T45E Automatic Transmission Assembly

from

$2023.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:
  • Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
  • All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
  • During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
  • All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
  • Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
  • No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
  • Product might not be available in all states due to local laws.
See More

Moveras – 4T45E – Automatic Transmission (Part No.M01784)

4T45E - Automatic Transmission

from

$1849.99
Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:
  • Product might not be available in all states due to local laws.
  • We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
  • Each Moveras transmission is produced in a World Class manufacturing facility
  • Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
  • Our transmissions are produced in a Clean Room environment
  • Every transmission is built to the same exacting standards by using a precisely documented and controlled process.
See More

ACDelco – AT Pressure Control (Part No.J4006209898ACD)

AT Pressure Control

from

$123.94
AT Pressure Control

ACDelco – AT Solenoid (Part No.J4006209867ACD)

AT Solenoid

from

$53.56
AT Solenoid

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBA4967)

Automatic Transmission Control Solenoid

from

$24.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

In-Demand Automatic Transmission Pan and Gaskets for 2008 Chevrolet HHRs

Select from 13 premium Automatic Transmission Pan and Gaskets parts for your 2008 Chevrolet HHR, with prices ranging from $6.99 to $105.35.

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18715)

Transmission Oil Pan Gasket

from

$28.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Dorman – Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart (Part No.265-809)

Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart

from

$66.99
This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:
  • Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
  • Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on testing to ensure a quality fit
See More

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

from

$16.99
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 90 minutes
See More

ATP – REUSABLE AT PAN GSKT (Part No.JG-138)

REUSABLE AT PAN GSKT

from

$40.99
REUSABLE AT PAN GSKT

Felpro – Automatic Transmission Valve Body Cover Gasket (Part No.TOS 18716)

Automatic Transmission Valve Body Cover Gasket

from

$45.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Dorman – AT Oil Pan (Part No.J5030577048DOR)

AT Oil Pan

from

$105.35
AT Oil Pan

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Ultra Grey RTV Gasket Maker (9.5 oz.)

from

$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:
  • Designed specially for high-torque and high vibration applications
  • Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
  • OEM specified
  • Low-odor, non-corrosive formula
  • Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
See More

Mahle – AT Pan Gasket (Part No.J5040366469MAH)

AT Pan Gasket

from

$64.64
AT Pan Gasket

Dorman – Help – Transmission Oil Cooler Seal (Part No.66998)

Transmission Oil Cooler Seal

from

$15.99
This Dorman Automatic Transmission Oil Cooler Gasket eliminates leaks where the oil cooler line connects to the transmission. Gasket may break down over time, causing leaks, and should be replaced any time the oil cooler line and transmission are separated.

Product Features:
  • Durable construction – rubber over steel construction creates a positive seal and retains its shape.
  • Direct replacement – fits and functions like original equipment
  • Easy to install – direct-fit, no special tools required
  • Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
See More

Most Sold 2008 Chevrolet HHR Transmission Seals

Explore our best-selling Chevrolet parts for the 2008 HHR among 15 OEM and aftermarket options starting from $2.49.

National – Shaft Repair Sleeve (Part No.99138)

Shaft Repair Sleeve

from

$24.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Multi Purpose Seal (Part No.3543)

Multi Purpose Seal

from

$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.8792S)

Multi Purpose Seal

from

$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.5693)

Multi Purpose Seal

from

$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40°F to 400°F / -40°C to 204°C
  • Excellent high temperature capabilities
  • Compatible with wide range of fluids
  • Delivers quality and reliable performance for every type of repair
See More

ATP – AT SEAL DRIVE AXLE (Part No.XO-15)

AT SEAL DRIVE AXLE

from

$15.99
AT SEAL DRIVE AXLE

SKF – AT Output Shaft Seal (Part No.J2557571115SKF)

AT Output Shaft Seal

from

$25.42
AT Output Shaft Seal

National – Multi Purpose Seal (Part No.4072N)

Multi Purpose Seal

from

$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

ATP – AT SEAL DRIVE AXLE (Part No.XO-16)

AT SEAL DRIVE AXLE

from

$19.99
AT SEAL DRIVE AXLE

Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)

Auto Transmission Shift Shaft Seal

from

$2.49
Product Features:
  • Brand may vary by location
See More

ACDelco – MT Output Shaft Seal (Part No.J1157225257ACD)

MT Output Shaft Seal

from

$30.57
MT Output Shaft Seal

Driveworks – Auto Transmission Output Shaft Seal Kit (Part No.S-5693)

Auto Transmission Output Shaft Seal Kit

from

$20.29
Product Features:
  • Brand may vary by location
See More

Timken – Axle Seal (Part No.K40211175475TIM)

Axle Seal

from

$19.46
Axle Seal

FAG US – SHAFT SEAL (Part No.SS2677)

SHAFT SEAL

from

$11.99
SHAFT SEAL

FAG US – SHAFT SEAL (Part No.SS2114)

SHAFT SEAL

from

$7.49
SHAFT SEAL

Mahle – Oil Dipstick Seal (Part No.A1120666332MAH)

Oil Dipstick Seal

from

$2.62
Oil Dipstick Seal

Top-Rated Transmission Parts Brands For Your 2008 Chevrolet HHR

Shop for the best-rated brands offering Transmission Parts and other products for your 2008 Chevrolet HHRs. Below you’ll find some of our best rated Transmission Parts from Permatex, Imperial, and National, and more. Transmission Parts from these brands that fit a 2008 HHR start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2008 Chevrolet HHR Transmission Parts

When it comes to maintaining or upgrading your 2008 Chevrolet HHR, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 2008 Chevrolet HHR. With over 6 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $19.49. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge
from
$28.49
This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

Ultra Grey RTV Gasket Maker (9.5 oz.)
from
$32.99
This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ
from
$16.99
This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

Popular Imperial 2008 Chevrolet HHR Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 2008 Chevrolet HHR owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 2008 HHR, Advance Auto Parts carries a full inventory of 10 Imperial Transmission Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Imperial Transmission Parts range from $27.49 to $85.99, plus, with more than 116 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

Maxi-Kool® XL Transmission Oil Cooler
from
$73.99

(7)

Maxi-Kool® XL Transmission Oil Cooler

“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”

High Performance Transmission Oil Cooler
from
$67.99
This product is not rated

High Performance Transmission Oil Cooler

“”

High Performance Transmission Oil Cooler
from
$85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

FAQs for 2008 Chevrolet HHR Transmission Parts

Which Transmission Parts are best-sellers for 2008 Chevrolet HHRs?

Out of 89 Transmission Parts that fit 2008 Chevrolet HHRs, the following parts are the top sellers:

What’s the price range for 2008 Chevrolet HHR Transmission Parts?

Transmission Part prices for the 2008 Chevrolet HHR start at $2.49 and go up to $2,023.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2008 Chevrolet HHR?

The average price for Transmission Parts for the 2008 Chevrolet HHR is $124.12. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Chevrolet HHR model years?

Yes, we currently carry Transmission Parts for 5 model years of Chevrolet HHRs between 2006 and 2011. Transmission Parts are bought most frequently for the following model years: 2011, 2010, 2009, 2007, and 2006.

What are the cheapest Transmission Parts for my 2008 Chevrolet HHR?

The cheapest 2008 Chevrolet HHR Transmission Parts we carry in stock are:

What are the top-rated Transmission Parts that fit the 2008 Chevrolet HHR?

Out of 2,084 reviews by customers, our 2008 Chevrolet HHR Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2008 Chevrolet HHR and their top-rated products:

What types of Transmission Parts do you sell for my 2008 Chevrolet HHR?

Can I get help with 2008 Chevrolet HHR Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Transmission Parts and more.

What is your return policy for Chevrolet HHR Transmission Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet HHR Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.