2008 Chevrolet C4500 Kodiak Drivetrains
More 2008 Chevrolet C4500 Kodiak Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2008 Chevrolet C4500 Kodiak, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2008 Chevrolet C4500 Kodiak Drivetrains
Dorman – Differential Pinion Yoke Assembly (Part No.697-547)
from
$202.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)
from
$4.99
Product Features:
See More
- Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
- Fits standard open differentials only
MOOG Driveline Products – Double Cardan CV Ball Kit (Part No.617)
from
$59.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Designed for ease of installation
- Includes necessary hardware
- Designed for superior performance
- Designed for ultimate strength
- Increased tolerance for a performance fit
- Meets deflection parameters
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R80RMK)
from
$226.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- DANA-80 MASTER BEARING KIT
Yukon Gear – S135 Ring Gear Bolt & Nut Kit (Set Of 16 Bolts) (Part No.33041)
from
$138.99
S135 ring gear bolt & nut kit (set of 16 bolts).
Product Features:
See More
Product Features:
- Ring gear bolt and nut kit
- Fits Dana Spicer S135
- Includes 12 bolts and nuts
Yukon Gear – Replacement Outer Oil Slinger For Dana 80 (Part No.33018)
Cardone – Transfer Case Motor (Part No.48-108)
from
$301.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Product Features:
See More
Product Features:
- All motors are 100% torque tested to ensure strength for proper gear engagement.
- Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
- Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
- Motor magnets are 100% recharged for superior performance and reliability.
- Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
Yukon Gear – Pinion Install Kit For Dana 80 Differential (4.125" OD Only) (Part No.13036)
from
$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
USA Standard Gear – Replacement Spider Gear Set For Dana 80, 37 Spline (Part No.39012)
from
$318.99
Product Features:
See More
- Spider gear kit
- Fits Dana Spicer 80, 37 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Dana 80 Tracloc Clutch Set Round Design (Part No.16157)
from
$502.99
Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).
Product Features:
See More
Product Features:
- Clutch kit
- Fit Dana Spicer 80 Trac Loc positraction
Pro-King – Axle Seal (Part No.716F076A)
from
$38.99
Axle Seal
Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Steel Spool For Dana 80 With 37 Spline Axles, 4.10 & Up (Part No.32173)
from
$1060.00
Yukon Performance steel spool for 8Dana 80 with 37 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler Dana Spicer 80 with 37 spline axles
- 4.10 and up ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Replacement Shim Kit For Dana 80 (Part No.55025)
from
$89.99
Product Features:
See More
- Complete shim kit for Dana Spicer 80
- 4.125″ O.D. pinion bearing application only
USA Standard Gear – Master Overhaul Kit for the Dana 80 Differential (4.125" OD only). (Part No.37025)
from
$446.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and silicone.
Driveworks – Tapered Roller Bearing (Part No.S-LM-48548)
Yukon Gear – 1480 U-Bolt Kit (Part No.41191)
Yukon Gear – Differential (Part No.26046)
from
$994.99
Differential
Yukon Gear – Replacement Yoke For Dana 80 With A 1410 U/Joint Size (Part No.41034)
from
$334.99
Yukon replacement yoke for Dana 80 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 37 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)
from
$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.
Product Features:
See More
Product Features:
- Extra Large clamshell
- Fits carrier bearing puller
Yukon Gear – Set Up Bearing (Part No.56040)
from
$264.99
Set-up carrier bearing kti (2 bearings, no races) for Dana 70 HD and Dana 80. 469. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 80
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)
from
$69.99
Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 70 and 80
Yukon Gear – Set Up Bearing (Part No.56045)
from
$153.99
M802048 set-up bearing (one bearing). No return.
Product Features:
See More
Product Features:
- Set up bearing
- Fits M802048 pinion bearing
- Easily slips on and off pinion journal to allow for easier pinion depth adjustment
Driveworks – Tapered Roller Bearing (Part No.S-LM-48510)
Driveworks – Tapered Roller Bearing (Part No.S-3920)
Dorman – Help – Auto Transmission Case Vent (Part No.14689)
from
$6.99
This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles
- Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 2008 Chevrolet C4500 Kodiak Drivetrains Categories
2008 Chevrolet C4500 Kodiak Drivetrains
You count on your 2008 Chevrolet C4500 Kodiak to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 131 Drivetrains ranging in price from $3.49 to $1,145.00, you’re sure to find everything you need for your 2008 Chevrolet C4500 Kodiak.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 11 different brands like Moog, Spicer, and National. 2008 Chevrolet C4500 Kodiak Drivetrains start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,292 extensive product reviews on 2008 Chevrolet C4500 Kodiak Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Premium Universal Joint with 4.7 stars and Universal Joint Strap Kit with 4.9 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2008 Chevrolet C4500 Kodiak below to get started!
Top-Rated Drivetrains Brands For Your 2008 Chevrolet C4500 Kodiak
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Chevrolet C4500 Kodiak running right for years to come. In our inventory you’ll find brands like Moog, Spicer, National, and even more.
Popular Dorman – Help Drivetrains
You’ll find popular Dorman – Help brand products across Transfer Cases. All are waiting to get your 2008 Chevrolet C4500 Kodiak back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 2008 Chevrolet C4500 Kodiak, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 2008 Chevrolet C4500 Kodiak Drivetrains
What are the most purchased Drivetrains for the 2008 Chevrolet C4500 Kodiak?
Out of 131 Drivetrains for the 2008 Chevrolet C4500 Kodiak, the most popular in our inventory are:
What are the top-rated 2008 Chevrolet C4500 Kodiak Drivetrains?
Top-rated Drivetrains for your 2008 Chevrolet C4500 Kodiak based on customer reviews/ratings are:
from
$9.99
(10)
Universal Joint Strap Kit
“Replaced my factory junk with this kit. Now I will be able to work on it in the future.”
from
$59.99
(9)
Double Cardan CV Ball Kit
“Fit my truck like a glove just sent her home and it was mint”
