2008 Chevrolet Aveo5 Engine Parts

Name: Premium Timing Belt, 45.99 Inch With 146 Round Tooth, With Flat Tip
Brand: Dayco
SKU: 95338
Price: 93.99 USD
Rating: 5.0 (1 reviews)

Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 2008 Aveo5. Advance Auto Parts has popular Aveo5 parts like Camshafts, Engine Mounts, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other Aveo5 model years including 2007, 2009, 2010, 2011 and more. Select a category of 2008 Chevrolet Aveo5 Engine Parts below and start saving instantly.

Popular 2008 Chevrolet Aveo5 Engine Parts Categories

Engine Timing Belt Kit With Water Pumps

Engine Oil Temperature Senders

Valve Cover Gaskets

Engine Mount and Torque Struts

Oil Pumps

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Crankshaft Position Sensors

Harmonic Balancers

Cylinder Head Gasket Sets

Timing Idlers

Engine Mounts

Oil Pans

Engine Timing Belt Kit without Water Pumps

Cylinder Head Gaskets

Standard Rod Bearing Sets

Camshaft Seals

Cylinder Heads

Engine Assembly Lube

Engine Oil Pump Primers

Essential Engine Parts for 2008 Chevrolet Aveo5s

from

$93.99

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
Teflon coated profile round tooth with flat tip belt designed for specific high performance, high temperature engines

from

$781.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$131.99

Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

from

$176.99

ACDelco GM Original Equipment Engine Crankshaft Position Sensors monitor the position and rotational speed of the crankshaft, and are GM-recommended replacements for your vehicle’s original components. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. These original equipment engine crankshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps keep engine timing and fuel injection running in sync
Helps provide proper alignment, positioning, and spacing for easy installation
Synchronizes engine valves and pistons for excellent engine performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$62.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$179.99

This engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage.

Product Features:

Direct replacement – this engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles
Ideal solution – engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$90.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$178.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$10.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Formulated for prelubrication cam lobes, lifters & engine bearings
Increases load carrying capacity
Holds fast to surfaces
Exacting tolerances
Meets or exceeds OEM specifications
4.0 oz. Squeeze Container

from

$40.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$665.99

ENGINE CTRL COMP.

from

$30.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$49.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$355.99

Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.

from

$96.99

Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$61.99

ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Helps keep engine timing and fuel injection running in sync
Helps provide proper alignment, positioning, and spacing for easy installation
Synchronizes engine valves and pistons for excellent engine performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$235.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$73.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
Durable construction – stringent specifications and careful construction help ensure longevity
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$55.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 04-17; PONT 05-10;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2004-2017
Weight approx: 3 Lbs

from

$9.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$31.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$19.49

This engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications. Level marks are clearly distinguished and properly gauged for accuracy.

Product Features:

Ideal replacement – this engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications
Ideal solution – level marks are clearly distinguished and properly gauged for accuracy
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$194.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$364.99

Gates Timing Belt Component Kits with Water Pump offer customers the best and most complete repair solution by including the same OE components as our TCKs – timing belts, pulleys and tensioners as well as a water pump. Timing belt driven water pumps should always be replaced when the timing belt is replaced.

Product Features:

Includes belts, idler pulleys, tensioners, tensioner springs, water pump, support hardware, detailed installation instructions, and technical service bulletins.
Water pumps are designed and built for long lasting, efficient cooling
Hydraulic tensioners included, where needed
Everything you need to do the job right, all in one box
The Gates limited warranty matches the original manufacturer’s timing belt replacement intervals not just for parts, but also for labor and other associated costs

from

$65.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 04-17; PONT 05-10;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2004-2017
Weight approx: 4 Lbs

from

$39.49

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to ensure proper air/fuel ratio along with proper operation of the cooling fans and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

Upgrade your 2008 Chevrolet Aveo5 with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2008 Chevrolet Aveo5, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Aveo5 functioning at its best. At Advance Auto Parts, we offer a wide selection of 37 Engine Parts for the 2008 Chevrolet Aveo5, designed to meet your needs without breaking the bank. From Camshaft replacements to Engine Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2008 Chevrolet Aveo5 at great prices. Our Engine Parts inventory for this model ranges from just $6.99 to $777.99, with an average price of $114.81. Our 37 Engine Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 2008 Chevrolet Aveo5 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Chevrolet Aveo5, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Dayco, Imperial, and more. FELPRO Engine Parts start at just $40.99 and boast an impressive 4.6 stars average rating from customers. Dayco and Imperial also bring quality to the table, with Engine Parts available starting at $38.49, and at an average 4.5 stars rating. With 74 customer reviews and counting, our 2008 Chevrolet Aveo5 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Chevrolet Aveo5 is always ready to roll. We’re committed to providing you with everything you need to keep your Aveo5 in top shape, all in one place. Start shopping confidently below for your 2008 Chevrolet Aveo5!

Best-Selling Camshafts for 2008 Chevrolet Aveo5s

Enhance the driving experience in your Chevrolet with 7 quality Camshaft components, starting at $15.29.

show more show less

from

$41.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$53.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$61.99

Helps keep engine timing and fuel injection running in sync
Helps provide proper alignment, positioning, and spacing for easy installation
Synchronizes engine valves and pistons for excellent engine performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$34.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$15.29

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$31.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$15.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Top Picks for 2008 Chevrolet Aveo5 Engine Gaskets and Seals

Upgrade Chevrolet Aveo5s with top-quality Engine Gaskets and Seals parts, including 2 OEM and aftermarket selections for your 2008 model.

show more show less

from

$40.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$30.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

In-Demand Engine Timing Parts for 2008 Chevrolet Aveo5s

Select from 4 premium Engine Timing Parts parts for your 2008 Chevrolet Aveo5, with prices ranging from $38.49 to $194.99.

show more show less

from

$194.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$38.49

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round, reinforced tooth profile; designed to fit the timing sprockets precisely

from

$118.99

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$96.99

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

Most Sold 2008 Chevrolet Aveo5 Valve Cover and Cylinder Heads

Explore our best-selling Chevrolet parts for the 2008 Aveo5 among 3 OEM and aftermarket options starting from $47.99.

show more show less

from

$777.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$90.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$47.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Top-Rated Engine Parts Brands For Your 2008 Chevrolet Aveo5

Shop for the best-rated brands offering Engine Parts and other products for your 2008 Chevrolet Aveo5s. Below you’ll find some of our best rated Engine Parts from FELPRO, Dayco, and Imperial, and more. Engine Parts from these brands that fit a 2008 Aveo5 start at just $38.49 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2008 Chevrolet Aveo5 Engine Parts

When it comes to maintaining or upgrading your 2008 Chevrolet Aveo5, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2008 Chevrolet Aveo5. With over 1 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $40.99. Plus, with over 23 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $40.99

(23)

Engine Valve Cover Gasket Set

“Good”

Popular Dayco 2008 Chevrolet Aveo5 Engine Parts

Dayco auto parts is one of the highest quality Engine Part brands in the market. Any 2008 Chevrolet Aveo5 owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2008 Aveo5, Advance Auto Parts carries a full inventory of 3 Dayco Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dayco Engine Parts range from $38.49 to $194.99, plus, with more than 3 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $118.99

(1)

Timing Belt Tensioner Kit: W/ Belt, Camshaft Belt Tensioner & Idler, 3 Pieces

“Product is rated as good as OEM. If it fails prematurely, Major damage to engine will occur.”

from $194.99

(1)

Timing Water Pump Kit; With Pump, Belt and Pulleys

“Fit prefect no hassles.”

from $38.49

(1)

Premium Timing Belt, 47.64 Inch With 127 Round Tooth

“car runs like new”

FAQs for 2008 Chevrolet Aveo5 Engine Parts

Which Engine Parts are best-sellers for 2008 Chevrolet Aveo5s?

Out of 37 Engine Parts that fit 2008 Chevrolet Aveo5s, the following parts are the top sellers:

Multi-Purpose Seal (15440036) – $9.99
Engine Coolant Temperature Sensor (12223022) – $39.49
Engine Crankshaft Seal Kit (3216551) – $30.99

What’s the price range for 2008 Chevrolet Aveo5 Engine Parts?

Engine Part prices for the 2008 Chevrolet Aveo5 start at $6.99 and go up to $777.99 for the most premium parts.

What’s the average price of a Engine Part for a 2008 Chevrolet Aveo5?

The average price for Engine Parts for the 2008 Chevrolet Aveo5 is $114.81. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet Aveo5 model years?

Yes, we currently carry Engine Parts for 3 model years of Chevrolet Aveo5s between 2007 and 2011. Engine Parts are bought most frequently for the following model years: 2011, 2010, 2009, and 2007.

What are the cheapest Engine Parts for my 2008 Chevrolet Aveo5?

The cheapest 2008 Chevrolet Aveo5 Engine Parts we carry in stock are:

Stock Replacement Engine Assembly Lubricant, 4 oz. (50175373) – $6.99
Multi-Purpose Seal (15440036) – $9.99
Engine Assembly Lubricant (20686470) – $10.49
Multi-Purpose Seal (20440180) – $10.99
Engine Camshaft Seal Kit (99992740) – $15.29

What are the top-rated Engine Parts that fit the 2008 Chevrolet Aveo5?

Out of 74 reviews by customers, our 2008 Chevrolet Aveo5 Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2008 Chevrolet Aveo5 and their top-rated products:

Engine Gaskets and Seals
- Engine Valve Cover Gasket Set (99992757) – $40.99
Valve Cover and Cylinder Heads
- Engine Valve Cover Gasket Set (99992757) – $40.99

What types of Engine Parts do you sell for my 2008 Chevrolet Aveo5?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 2008 Chevrolet Aveo5:

Can I get help with 2008 Chevrolet Aveo5 Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet Aveo5 Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Aveo5 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Chevrolet Aveo5 Engine Parts

Dayco – Premium Timing Belt, 45.99 Inch With 146 Round Tooth, With Flat Tip (Part No.95338)

Spartan – Engine Cylinder Head; Chev 1.6 DOHC 09-11 Cyl Head (Part No.2CWP)

Melling – Stock Replacement OE Type Oil Pump (Part No.M275)

GM Genuine Parts – Engine Crankshaft Position Sensor (Part No.55555806)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26516 PT)

Dorman – Engine Oil Temperature Cooler (Part No.918-432)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26379 PT)

Dorman – Engine Oil Pan: Direct Fit, Aluminum, Center Sump, 4.8 Quart (Part No.264-049)

Sealed Power – Engine Assembly Lubricant (Part No.55-400)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50730 R)

Cardone – ENGINE CTRL COMP. (Part No.77-5988F)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40535)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.4-4210CP)

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Dayco – Timing Component Kit Without Belt, Dayco (Part No.84158)

GM Genuine Parts – Engine Camshaft Position Sensor (Part No.213-4701)

Dayco – Timing Belt Kit; With Belt, Camshaft Belt Tensioner And Idler, 3 Piece Set (Part No.95338K1)

Dorman – Harmonic Balancer Assembly (Part No.594-387)

Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.3114)

National – Multi-Purpose Seal (Part No.223830)

Felpro – Engine Camshaft Seal Kit (Part No.TCS 46144)

Dorman – Help – Engine Oil Dipstick: Direct Replacement, Steel (Part No.917-427)

Dayco – Timing Water Pump Kit; With Pump, Belt and Pulleys (Part No.WP335K1A)

Gates – PowerGrip Premium Timing Component Kit with Water Pump (TCKWP) (Part No.TCKWP338)

Anchor – Engine Mount: Right, 1 Piece (Part No.3113)

NTK – Engine Coolant Temperature Sensor (Part No.EF0075)

National – Shaft Repair Sleeve (Part No.99147)

Carquest Premium – Camshaft Sensor (Part No.CSC1167)

GM Genuine Parts – Engine Camshaft Position Sensor (Part No.213-4701)

National – Shaft Repair Sleeve (Part No.99166)

Felpro – Engine Camshaft Seal Kit (Part No.TCS 46116)

National – Multi-Purpose Seal (Part No.710799)

FAG US – General Seal (Part No.SS2705)

Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.3114)

Anchor – Engine Mount: Right, 1 Piece (Part No.3113)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50730 R)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40535)

Dayco – Timing Water Pump Kit; With Pump, Belt and Pulleys (Part No.WP335K1A)

Dayco – Premium Timing Belt, 47.64 Inch With 127 Round Tooth (Part No.95335)

Dayco – Timing Belt Tensioner Kit: W/ Belt, Camshaft Belt Tensioner & Idler, 3 Pieces (Part No.95335K1)

Dayco – Timing Component Kit Without Belt, Dayco (Part No.84158)

Spartan – Engine Cylinder Head; Chev 1.6L 06-18 DOHC Head (Part No.2CWW)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26379 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26379 PT)