2008 Cadillac Escalade ESV Air Suspension and Kits

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

WirelessAir with EZ Mount packages the manifold and compressor into one convenient, pre-assembled and factory-tested bracket, giving you everything you need to have full control of your air springs, in no time at all. This application is a universal fit and may not work with all vehicles. This product features both a frame thru bolt and self tapping screw option, allowing flexibility of placement and how it is mounted to the vehicle.

If your rear end bounces more than usual when going over rough roads or corners feel a little too strong to be safe, your shock absorbers may need to be replaced. Even if your air springs or coils are the main issue, replacing your shock absorbers at the same time will prevent damage in the near future and will replace parts that are worn and not performing as they used to. With Suncore’s rear pair of gas shocks, you will get the OE style ride you want with the hassle free installation you get from OE parts. No modifications are required and your new shocks will work with your existing suspension components like the day it was new

Suncore’s rear suspension gas shock absorbers are high quality OE style replacements that make the suspension system work like factory new condition. The gas charge allows the shock to compress and extend slowly while supporting the frame of your vehicle, effectively eliminating rough conditions in the cabin. The direct fit allows you to install the shock absorbers right where you took the damaged ones out with no need to mount new brackets, Suncore’s shocks will fit right in without modifications. Get the quality shock absorber you expect with the OE style ride quality you deserve with Suncore’s Pair of Rear Gas Shock Absorbers.

Suncore Shock Absorber, 12S211110. EXTERNAL SUPPLY>FDO>BACK ROOM-FDO>APPLICATION SPECIFIC from Suncore

Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Convert to a high-quality conventional suspension with this air spring to coil spring conversion kit. Corrosion-resistant steel springs maintain a smooth ride without the cost.

Convert a vehicle’s factory-equipped air suspension to a conventional suspension with a Monroe Suspension Conversion Kit. Includes premium components – application-tuned shock/strut, coil spring(s) and hardware.

Suncore’s Air Compressor and Dryer Assembly is precision engineered to meet the performance and installation fit of the OEM suspension air compressor found in your Z55 Autoride. The air compressor directly plugs into the current air lines and electronic controls and even has a replacement plug in case yours is damaged or worn. A pressure transducer is also built in, allowing your air suspension to monitor and solve unbalanced air springs.

This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Skyjacker(R) suspension leveling kits are just what you need to get your truck or suv riding level again. They feature specially designed spacers to give you the additional lift necessary to make your vehicle stance level. Available for either the front or rear, these skyjacker suspension leveling kits are an excellent choice to lift your truck or suv.

Ready LIFT has engineered the perfect solution for leveling the 2017 to 2018 GM 1500 trucks. GM changed the upper control arms on the GM 1500 pickups to a stamped steel upper control arm that provides minimal structural support for the factory ball joint when in a lifted or leveled scenario. This has resulted in GM mandating no lift kits or leveling kits are to be installed on these new vehicles. At Ready LIFT our goal is provide accurate and safe lifting and leveling solutions for our customers. Our engineering team has developed the perfect leveling solution for these new GM 1500 trucks that includes our popular CNC machined billet aircraft grade aluminum 2.25 Inch leveling kit along with strong DOM-tube steel upper control arms. These new control arms are a direct replacement for the factory stamped steel arms and features our proprietary heavy duty ball joints and an industry first maintenance free anti-resistance bushing assembly that is self lubricating and features a free-rotating inner sleeve.. With this new leveling kit/control arm combination you can now level the 2017 to 2018 GM 1500 trucks with assurance the vehicle will sit level, maintain the factory ride and you have the peace of mind you will never have the factory stamped steel control arm failure.

This air suspension shock is designed to match the fit and function of the original shock on specified vehicles, and is engineered for durability and reliable performance.

This air suspension shock is designed to match the fit and function of the original shock on specified vehicles, and is engineered for durability and reliable performance.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula is suitable for use in 92% of vehicles in light duty automatic transmissions 2010 and newer. Keep your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand. Volume: 1 quart.

Fully synthetic leading edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears.

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

This suspension ride height sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

The body control system monitors the vehicle ride height on vehicle applications utilizing an air ride suspension system. Maintaining system ride height is critical for vehicle and braking control.

The yaw rate sensor is part of the stability control system which works in conjunction with the anti-lock brake system. The sensor measures the lateral movement of the vehicle, should the vehicle begin to move in a sideways direction, the anti-lock brake system will operate the brake system in a manner which may avoid a loss of vehicle control.

The yaw rate sensor is part of the stability control system which works in conjunction with the anti-lock brake system. The sensor measures the lateral movement of the vehicle, should the vehicle begin to move in a sideways direction, the anti-lock brake system will operate the brake system in a manner which may avoid a loss of vehicle control.

The yaw rate sensor is part of the stability control system which works in conjunction with the anti-lock brake system. The sensor measures the lateral movement of the vehicle, should the vehicle begin to move in a sideways direction, the anti-lock brake system will operate the brake system in a manner which may avoid a loss of vehicle control.

This extended-life front-end kit includes all the components required to repair both the left and right side of the suspension. Featuring premium designs, this application-specific kit is engineered to restore factory-like feel and performance.

This extended-life front-end kit includes all the components required to repair both the left and right side of the suspension. Featuring premium designs, this application-specific kit is engineered to restore factory-like feel and performance.

This extended-life front-end kit includes all the components required to repair both the left and right side of the suspension. Featuring premium designs, this application-specific kit is engineered to restore factory-like feel and performance.