2008 BMW X5 Steering and Chassis Parts

Name: Power Steering Filter
Brand: Cardone
SKU: 20-0012F
Price: 46.99 USD
Rating: 5.0 (1 reviews)

Below you will find various in-demand BMW Steering and Chassis Parts, components and accessories for your 2008 X5. Advance Auto Parts has popular X5 parts like Tie Rods, Alignment Hardwares, Power Steering Parts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other X5 model years including 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and more. Select a category of 2008 BMW X5 Steering and Chassis Parts below and start saving instantly.

Popular 2008 BMW X5 Steering and Chassis Parts Categories

Rack & Pinions

Sway Bar Link Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Drive Shaft CV Joints

Power Steering Pressure Hoses

Power Steering Reservoirs

Rack and Pinion Boots

Sway Bar Bushings

Tie Rod Assemblies

Toe Links

Power Steering Fluid Level Sensors

Power Steering Pump Bolt Kit

Alignment Caster / Camber Control Arms

Suspension Guide Rods

Suspension Ball Joint Snap Rings

Essential Steering and Chassis Parts for 2008 BMW X5s

from

$46.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$12.99

Rein OE quality bolts kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original bolts are identical to OEM. Supplied with all the necessary bolts and torque specs to ensure that the job is done right.

Product Features:

Includes all the bolts needed to complete the job.
Comes with torque specs to make sure each bolt is properly tighten
Manufactured to strict engineering standards/specifications in materials and tolerances
Aluminum bolts are torque to yield and must be replaced once they are released.

from

$146.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$24.99

Rein Automotive OE quality power steering reservoirs, install, fit and perform the way the original manufacturer intended. These reservoirs are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

Reservoir contains filter that is not-removable and reservoir must be replaced to keep power steering system functioning properly
Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$97.74

The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:

OE quality, fit and performance
High quality rubber
Reinforced with advanced materials
Excellent vibration control

from

$15.57

Coolant Level Sensor

from

$75.87

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW manufactures guide rods for original equipment and service needs. TRW continues to develop next-generation guide rod designs to reduce cost and weight, while maintaining or enhancing performance.

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Free Roadside Assistance Program

from

$477.99

This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$137.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$172.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$305.99

This replacement caster camber control arm is adjustable to allow for proper wheel alignment, such as after collision repairs, and for vehicles with modified suspensions or aftermarket wheels.

Product Features:

Direct replacement – this control arm matches the geometry of the factory part and allows for fine adjustments required for proper wheel alignment.
Ideal solution – adjustable replacement for an original control arm that can no longer ensure correct alignment after collision repairs, suspension modifications or the installation of aftermarket wheels.
Durable construction – this part is made from quality materials for reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$313.99

Direct replacement – this control arm matches the geometry of the factory part and allows for fine adjustments required for proper wheel alignment.
Ideal solution – adjustable replacement for an original control arm that can no longer ensure correct alignment after collision repairs, suspension modifications or the installation of aftermarket wheels.
Durable construction – this part is made from quality materials for reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$62.36

The Febi Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$68.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$36.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.?

Product Features:

EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$102.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$2.63

Every Febi Ball Joint Snap Ring maintains the OE quality and is to be replaced every time the ball joint is removed or replaced.

Product Features:

OE expertise and quality
Precision manufactured
Corrosion protection

from

$22.00

Steering Rack Boot Kit

from

$32.49

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$9.79

The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$25.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$15.03

Sway Bar Bushing

from

$124.99

Complete with inner and outer tie rod ends
Restores OE alignment
Reduces tire wear
Improves steering response

from

$141.62

Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties
High ball stud articulation angles.

from

$129.13

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties
High ball stud articulation angles.

from

$604.97

Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:

OE quality and direct fit replacement
Remanufacture based on highest quality standards
Computerized tests insure that all products meet the OE performance specification.
Performance and quality approvals from OE steering gear and pump manufacturers world wide

from

$601.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$355.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Upgrade your 2008 BMW X5 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2008 BMW X5, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Steering and Chassis Parts are key to keeping your X5 functioning at its best. At Advance Auto Parts, we offer a wide selection of 76 Steering and Chassis Parts for the 2008 BMW X5, designed to meet your needs without breaking the bank. From Tie Rod replacements to Alignment Hardware upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2008 BMW X5 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.40 to $624.99, with an average price of $105.43. Our 76 Steering and Chassis Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 2008 BMW X5 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 BMW X5, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Cardone, Moog, Dorman, and more. Cardone Steering and Chassis Parts start at just $31.99 and boast an impressive 4 stars average rating from customers. Moog and Dorman also bring quality to the table, with Steering and Chassis Parts available starting at $59.99, and at an average 4 stars rating. With 132 customer reviews and counting, our 2008 BMW X5 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 BMW X5 is always ready to roll. We’re committed to providing you with everything you need to keep your X5 in top shape, all in one place. Start shopping confidently below for your 2008 BMW X5!

Best-Selling Tie Rods for 2008 BMW X5s

Enhance the driving experience in your BMW with 11 quality Tie Rod components, starting at $59.99.

show more show less

from

$94.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Loose or worn chassis parts can lead to premature tire wear
Assembly includes inner and outer tie rods for quick and complete repair
Incorporates proven design and engineering features
Easy access wrench flat allows for use of a socket for easy installation and removal

from

$59.99

Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive suspension parts come with the mounting hardware if required.

Product Features:

Includes the needed hardware for the complete installation.
Manufactured to strict engineering standards/specifications in materials and tolerances.
Part has a high corrosion resistance for maximum life.
Matches original equipment design specifications.

from

$411.22

CONTROL ARM

from

$149.99

EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$141.62

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties
High ball stud articulation angles.

from

$124.99

Complete with inner and outer tie rod ends
Restores OE alignment
Reduces tire wear
Improves steering response

from

$121.52

FEBI Tie rod assemblies strictly comply with the specification of the manufacturers providing; quality, performance and exact fitment. The FEBI tie rod assembly ensures a comfortable driving experience and to prevent high-frequency vibrations being transferred to other parts.

Product Features:

Original Equipment Manufacturer
Larger diameter to increase the load carrying capacity
Outstanding slide properties
High ball stud articulation angles.

from

$102.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$82.94

The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$81.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$59.99

This steering tie rod end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process to ensure smooth, safe operation.

Product Features:

Trustworthy replacement – this steering tie rod end assembly directly replaces the original equipment on specific vehicle applications
Durably designed – factory-sealed and precision-forged housing resists future corrosion
Reliably engineered – built to decrease wear rate and ensure overall strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

Top Picks for 2008 BMW X5 Power Steering Parts

Upgrade BMW X5s with top-quality Power Steering Parts parts, including 19 OEM and aftermarket selections for your 2008 model.

show more show less

from

$48.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$15.57

Coolant Level Sensor

from

$12.99

Includes all the bolts needed to complete the job.
Comes with torque specs to make sure each bolt is properly tighten
Manufactured to strict engineering standards/specifications in materials and tolerances
Aluminum bolts are torque to yield and must be replaced once they are released.

from

$265.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening

from

$32.49

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$624.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$97.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$84.15

P/S Reservoir

from

$28.99

All Steering Power Filter

from

$28.99

All Steering Power Filter

from

$28.99

POWER STEERINGFILTER

from

$21.65

Steering Rack Boot Kit

from

$17.71

SCREW SET

from

$11.49

Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific power steering boot kits come complete with everything needed to do a proper installation, including all the hardware needed for a guaranteed fit the first time.

Product Features:

Rein boot kits come with all the needed hardware and components for the complete repair.
All components are manufactured to strict engineering standards/specifications in materials and tolerances
Rein also offers a full line of individual boots.
Matches original equipment design specifications

from

$6.99

POWER STEERINGFILTER

In-Demand Sway Bars for 2008 BMW X5s

Select from 22 premium Sway Bars parts for your 2008 BMW X5, with prices ranging from $15.03 to $85.99.

show more show less

from

$82.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$81.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$82.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$81.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$48.23

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$26.99

Matches OE form, fit and function
Comes with necessary components and hardware for a complete installation
Hardware functionality matches original design requirements
Easy access wrench flat allows for the use of a socket for easy installation and removal
Application specific for this vehicle

from

$15.03

Sway Bar Bushing

from

$26.49

Matches OE form, fit and function
Comes with necessary components and hardware for a complete installation
Hardware functionality matches original design requirements
Easy access wrench flat allows for the use of a socket for easy installation and removal
Application specific for this vehicle

from

$85.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$85.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$68.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$68.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$65.42

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$64.34

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$63.42

The Febi Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$62.36

The Febi Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$62.03

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$62.02

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$34.80

Sway Bar Link

from

$30.44

The APA/URO Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$29.28

SWAY BAR BUSHING

from

$17.37

The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

Most Sold 2008 BMW X5 Ball Joints

Explore our best-selling BMW parts for the 2008 X5 among 18 OEM and aftermarket options starting from $2.40.

show more show less

from

$146.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$137.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$103.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$98.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$114.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$173.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$172.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$172.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$157.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$149.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$149.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$146.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$146.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$141.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$129.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$125.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$2.63

Every Febi Ball Joint Snap Ring maintains the OE quality and is to be replaced every time the ball joint is removed or replaced.

Product Features:

OE expertise and quality
Precision manufactured
Corrosion protection

from

$2.40

Ball Joint Snap Ring

Top-Rated Steering and Chassis Parts Brands For Your 2008 BMW X5

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2008 BMW X5s. Below you’ll find some of our best rated Steering and Chassis Parts from Cardone, Moog, and Dorman, and more. Steering and Chassis Parts from these brands that fit a 2008 X5 start at just $31.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Cardone 2008 BMW X5 Steering and Chassis Parts

When it comes to maintaining or upgrading your 2008 BMW X5, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Cardone ticks all of those boxes. We offer a wide selection of Cardone Steering and Chassis Parts, specifically designed for the 2008 BMW X5. With over 6 Cardone brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $144.77. Plus, with over 62 customer reviews and an average rating of 4 stars, you can trust that our Cardone Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$624.99

This product is not rated

Remanufactured Rack and Pinion Assembly

“”

from
$31.99

This product is not rated

Power Steering Filter

“”

from
$84.15

This product is not rated

P/S Reservoir

“”

Popular Moog 2008 BMW X5 Steering and Chassis Parts

Moog auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2008 BMW X5 owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2008 X5, Advance Auto Parts carries a full inventory of 12 Moog Steering and Chassis Parts. Plus you will be keeping your BMW in peak condition while saving money because prices on these Moog Steering and Chassis Parts range from $81.99 to $173.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$81.99

This product is not rated

Stabilizer Bar Link

“”

from
$82.99

This product is not rated

Stabilizer Bar Link

“”

from
$137.99

This product is not rated

Control Arm and Ball Joint Assembly

“”

FAQs for 2008 BMW X5 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2008 BMW X5s?

Out of 76 Steering and Chassis Parts that fit 2008 BMW X5s, the following parts are the top sellers:

Power Steering Filter (10659735) – $31.99
Stabilizer Bar Link (99992618) – $82.99
Stabilizer Bar Link (99992621) – $82.99

What’s the price range for 2008 BMW X5 Steering and Chassis Parts?

Steering and Chassis Part prices for the 2008 BMW X5 start at $2.40 and go up to $624.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2008 BMW X5?

The average price for Steering and Chassis Parts for the 2008 BMW X5 is $105.43. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other BMW X5 model years?

Yes, we currently carry Steering and Chassis Parts for 21 model years of BMW X5s between 2000 and 2021. Steering and Chassis Parts are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

What are the cheapest Steering and Chassis Parts for my 2008 BMW X5?

The cheapest 2008 BMW X5 Steering and Chassis Parts we carry in stock are:

Ball Joint Snap Ring (12529696) – $2.40
Ball Joint Snap Ring (10782334) – $2.63
POWER STEERINGFILTER (50167394) – $6.99
Power Steering Rack Boot Kit (11826881) – $11.49
Aluminum Bolt Kit (11324979) – $12.99

What are the top-rated Steering and Chassis Parts that fit the 2008 BMW X5?

Out of 132 reviews by customers, our 2008 BMW X5 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2008 BMW X5 and their top-rated products:

Sway Bars
- Stabilizer Bar Link (99992621) – $82.99
- Stabilizer Bar Link (99992626) – $81.99

What types of Steering and Chassis Parts do you sell for my 2008 BMW X5?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2008 BMW X5:

Can I get help with 2008 BMW X5 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Steering and Chassis Parts and more.

What is your return policy for BMW X5 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new BMW X5 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 BMW X5 Steering and Chassis Parts

Cardone – Power Steering Filter (Part No.20-0012F)

Rein – Aluminum Bolt Kit (Part No.HWK0007)

Rein – Power Steering Pressure Hose Assembly (Part No.PSH0196)

Rein – Power Steering Reservoir (Part No.PSR0027)

Febi – Drive Shaft Flex Joint (Guibo) (Part No.K1020116405FEB)

Vemo – Coolant Level Sensor (Part No.G1050226145VMO)

TRW – Guide Rod (Part No.L2015276000TRW)

Dorman – Alignment Camber / Toe Lateral Link (Part No.528-296)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620799)

Dorman – Suspension Control Arm (Part No.521-163)

Dorman – Suspension Control Arm (Part No.524-810)

Dorman – Suspension Control Arm (Part No.524-809)

Febi – Sway Bar Link (Part No.L1030451131FEB)

Rare Parts – Sway Bar Link (Part No.RP17932)

MOOG – Tie Rod End (Part No.EV801479)

MOOG – Tie Rod End (Part No.ES801293)

Febi – Ball Joint Snap Ring (Part No.L2027131288FEB)

Lemfoerder – Steering Rack Boot Kit (Part No.M1030230823LEM)

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3083)

Febi – Sway Bar Bushing (Part No.L1050237481FEB)

Rare Parts – Sway Bar Bushing (Part No.RP22433)

Burgaflex – Sway Bar Bushing (Part No.L1050377674BUR)

Rare Parts – Tie Rod Assbly (Part No.RP29159)

Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M3000392485LEM)

Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M3000276041LEM)

Maval – Complete Steering Rack, Remanufactured (Part No.M1000379159MAV)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2802)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2818)

MOOG – Tie Rod End Assembly (Part No.ES800685A)

Rein – Tie Rod (Part No.SCT0398)

Worldpac – CONTROL ARM (Part No.L2000539930FEB)

MOOG – Tie Rod End (Part No.EV800298)

Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M3000392485LEM)

Rare Parts – Tie Rod Assbly (Part No.RP29159)

Febi – Tie Rod Assembly (Part No.M3000392485FEB)

Rare Parts – Tie Rod End (Part No.RP28766)

Lemfoerder – Tie Rod End (Part No.M3010392434LEM)

Rare Parts – Tie Rod End (Part No.RP29149)

Dorman – Steering Tie Rod End (Part No.543-292)

Dorman – Suspension Control Arm (Part No.524-809)

Dorman – Suspension Control Arm (Part No.524-810)

Dorman – Suspension Control Arm (Part No.524-808)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Cardone – New Power Steering Filter (Part No.20-0038F)

Cardone – Power Steering Filter (Part No.20-P038F)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Vemo – Coolant Level Sensor (Part No.G1050226145VMO)

Rein – Aluminum Bolt Kit (Part No.HWK0007)

Carquest Premium – Power Steering Pressure Hose, 14mm Banjo x 16mm Fixed Male S.A.E. (Part No.37924)

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3083)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2810)

Carquest Premium – Power Steering Pressure Hose, 16mm Female S.A.E. x 16mm Fixed Female (Part No.40400)

Cardone – P/S Reservoir (Part No.M20302821615CAR)

BBB Industries – Power Steering Filter (Part No.991-FLT4)

BBB Industries – Power Steering Filter (Part No.991-FLT2)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

Lemfoerder – Steering Rack Boot Kit (Part No.M1030281016LEM)

Rein – SCREW SET (Part No.Y2005241630RIN)

Rein – Power Steering Rack Boot Kit (Part No.BKK0146)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

MOOG – Stabilizer Bar Link (Part No.K750216)

MOOG – Stabilizer Bar Link (Part No.K750217)

MOOG – Stabilizer Bar Link (Part No.K750215)

MOOG – Stabilizer Bar Link (Part No.K750218)

Lemfoerder – Sway Bar Link (Part No.L1030459155LEM)

Beck/Arnley – Stabilizer End Link (Part No.101-6947)

Burgaflex – Sway Bar Bushing (Part No.L1050377674BUR)

Beck/Arnley – Stabilizer End Link (Part No.101-6948)

Rare Parts – Sway Bar Link (Part No.RP17933)

Rare Parts – Sway Bar Link (Part No.RP17939)

Rare Parts – Sway Bar Link (Part No.RP17932)

Rare Parts – Sway Bar Link (Part No.RP17931)

Lemfoerder – Sway Bar Link (Part No.L1030459158LEM)

Lemfoerder – Sway Bar Link (Part No.L1030459157LEM)

Febi – Sway Bar Link (Part No.L1030451132FEB)

Febi – Sway Bar Link (Part No.L1030451131FEB)

Lemfoerder – Sway Bar Link (Part No.L1030451132LEM)

Lemfoerder – Sway Bar Link (Part No.L1030451131LEM)