2008 BMW M3 Steering and Chassis Parts
More 2008 BMW M3 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2008 BMW M3, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2008 BMW M3 Steering and Chassis Parts
MOOG – Control Arm and Ball Joint Assembly (Part No.RK80531)
from
$131.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Rare Parts – Tie Rod Assembly (Part No.RP26860)
from
$67.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rein – Power Steering Pressure Hose Assembly (Part No.PSH0120P)
from
$84.99
Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.
Product Features:
See More
Product Features:
- Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
- Designed as direct-fit replacements to ensure trouble-free proper installation.
- Complete with hardware and seals when necessary for installation to save installation time and additional costs.
- Restores your vehicle to safe and optimal performance levels.
- Replacing both pressure and return hoses together ensures optimal performance and safety levels.
aFe POWER – Sway Bar Set FR/RR (Part No.440-503006-N)
from
$681.99
aFe Control is proud to introduce the PFADT Series, Sway Bars for the 2014-2015 C7 Corvette. The 4130 Chromoly sway bars will transform your Corvettes handling and inspire driving confidence. Perfectly balanced, both front and rear bars are lightweight tubular construction. The front bar is 35MM and offers two adjustment holes, while the rear is 31.75MM and offers 3 adjustment holes allowing for fine tuning your Corvettes feel and balance. The kit includes heavy duty CNC machined 6061-T6 aluminum rear sway bar brackets, front and rear polyurethane bushings and heavy duty, ½” rod end endlinks with CNC machined articulation spacers. For years of durability and great looks, the bars are powder-coated a special 2 stage tangerine orange. Perfectly balanced, aFe Control sway bars will have your Corvette handling just as good at the track as it will around town.
Product Features:
See More
Product Features:
- Direct Fit Installation
- CNC Machined
- TIG Welded
- Lightweight Tubular Alloy Steel
Cardone – Power Steering Filter (Part No.20-0012F)
from
$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
MOOG – Stabilizer Bar Link (Part No.K750230)
from
$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
ZF – Power Steering Reservoir (Part No.M2030422018ZF)
from
$38.05
Power Steering Reservoir
Cardone New – Power Steering Reservoir (Part No.3R-501)
from
$49.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.
Product Features:
See More
Product Features:
- 100% testing ensures leak-free performance
- Designed to match O.E. fit, function and performance
- Manufactured from O.E. grade material for strength and durability
- Resistant to cracking caused by the high temperatures in the engine compartment
- Reservoirs with integrated filter have the same filtration efficiency as O.E.
APA/URO Parts – P/S Pump Pulley (Part No.M2060255582APA)
from
$66.03
P/S Pump Pulley
Lemfoerder – Control Arm Bushing (Part No.L2030526764LEM)
from
$20.22
The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
MOOG – Rack & Pinion Bellows Kit (Part No.K90444)
from
$50.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Rare Parts – Rack & Pinion Bellows (Part No.RP26924)
from
$40.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
Rare Parts – Tie Rod End (Part No.RP29043)
from
$63.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
MOOG – Tie Rod End (Part No.ES801052)
from
$97.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Cardone – Rack and Pinion Assembly (Part No.26-2800)
from
$313.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Rack and Pinion Assembly (Part No.26-2855)
from
$427.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
International Suspension Group – Ball Joint (Part No.L202056901ISG)
from
$16.71
The ISG Ball Joint is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
International Suspension Group – Ball Joint (Part No.L202077889ISG)
from
$20.71
The ISG Ball Joint is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Carquest Premium – Engine Coolant Level Sensor (Part No.FFA1003)
from
$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Bosch – Power Steering Pump, Remanufactured (Part No.M2010146318BOS)
from
$419.83
Remanufactured Bosch power steering pumps designed for an optimum performance and direct replacement of the original equipment. Bosch range offers both electric and mechanical pumps. Remanufacturing at Robert Bosch Automotive Steering includes all those products which we produce new and supply to vehicle manufacturers as original equipment. Renovation is carried out in accordance with a strictly defined process. All seals, synthetic and plastic parts are replaced 100%. Other parts which do not fall within the tolerance limits of series production are likewise replaced with new spare parts from the production line. The remanufactured units undergo extensive testing on the test rig before being released for delivery. This process ensures that all remanufactured products are of the same quality as those from the production line.
Product Features:
See More
Product Features:
- Designed to minimize power consumption
- Seals, synthetic and plastic parts are replaced 100%
- Capable to deliver high capacity pressures for all driving demands
- Undergos extensive testing
- Highly efficient design and manufacture from the OE know how
Cardone – Power Steering Pump (Part No.21-5182)
from
$121.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Bosch – Power Steering Pump, Remanufactured (Part No.M2010400698BOS)
from
$418.88
Remanufactured Bosch power steering pumps designed for an optimum performance and direct replacement of the original equipment. Bosch range offers both electric and mechanical pumps. Remanufacturing at Robert Bosch Automotive Steering includes all those products which we produce new and supply to vehicle manufacturers as original equipment. Renovation is carried out in accordance with a strictly defined process. All seals, synthetic and plastic parts are replaced 100%. Other parts which do not fall within the tolerance limits of series production are likewise replaced with new spare parts from the production line. The remanufactured units undergo extensive testing on the test rig before being released for delivery. This process ensures that all remanufactured products are of the same quality as those from the production line.
Product Features:
See More
Product Features:
- Designed to minimize power consumption
- Seals, synthetic and plastic parts are replaced 100%
- Capable to deliver high capacity pressures for all driving demands
- Undergos extensive testing
- Highly efficient design and manufacture from the OE know how
Cardone – Power Steering Pump (Part No.21-5969)
from
$143.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
CRP – Hose Clamp (Part No.Y3063860147CRP)
from
$3.55
Hose Clamp
Popular 2008 BMW M3 Steering and Chassis Parts Categories
2008 BMW M3 Steering and Chassis Parts
You count on your 2008 BMW M3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 42 Steering and Chassis Parts ranging in price from $3.15 to $681.99, you’re sure to find everything you need for your 2008 BMW M3.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 14 different brands like Cardone, Moog, and Rein. 2008 BMW M3 Steering and Chassis Parts start as low as $3.15!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 64 extensive product reviews on 2008 BMW M3 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Reservoir with 5.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2008 BMW M3 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2008 BMW M3
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 BMW M3 running right for years to come. In our inventory you’ll find brands like Cardone, Moog, Rein, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Tie Rods. All are waiting to get your 2008 BMW M3 back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated Cardone Steering and Chassis Parts
If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 2008 BMW M3, and some of our most reviewed Cardone parts include:
FAQs for 2008 BMW M3 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2008 BMW M3?
Out of 42 Steering and Chassis Parts for the 2008 BMW M3, the most popular in our inventory are:
What are the top-rated 2008 BMW M3 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2008 BMW M3 based on customer reviews/ratings are:
from
$29.99
(1)
Power Steering Reservoir
“It fits exactly to my 2011 335i. Hint: you can use the old cap that has a green sticker. The new cap doesn’t have the sticker.”
