2008 BMW 328Xi Body Parts
Find Your Specific 2008 BMW 328Xi Body Parts
Below you will find various in-demand BMW Body Parts, components and accessories for your 2008 328Xi. Advance Auto Parts has popular 328Xi parts like Vehicle Mirrors, Vehicle Windows, Bodies and Fender Parts and more. You’ll also find aftermarket and OEM Body Parts for other 328Xi model years including
2007 and more. Select a category of 2008 BMW 328Xi Body Parts below and start saving instantly.
Popular 2008 BMW 328Xi Body Parts Categories
Essential Body Parts for 2008 BMW 328Xis
Dorman – Integrated Door Lock Actuator (Part No.937-866)
from
$71.99
This trunk lock actuator motor matches fit and function of the original equipment actuator motor to restore proper trunk latch functions. Designed as a direct replacement, this part plugs into the factory wiring.
Product Features:
See More
Product Features:
- Ideal replacement – this trunk lock actuator motor matches the fit and function of the original actuator motor to restore trunk latch functions.
- Simple installation – this actuator motor features factory-style connectors and plugs into the original wiring harness.
- Cost-effective solution – offers original equipment function at a competitive price
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
aFe POWER – Dynamic Air Scoop (Part No.54-11478-R)
from
$175.99
Dynamic air scoops are constructed out of lightweight black powder coated aluminum and simply install behind the kidney bean grille. Increased air velocity and flow improves performance and throttle response.
Product Features:
See More
Product Features:
- Lightweight For Strength and Styling
- Directs Frontal Air Into Intake System For Max. Performance
- No Cutting Or Drilling On OEM Parts
- Fast Installation
Dorman – Window Regulator: Power, 1 Pack (Part No.749-469)
from
$58.99
The original equipment window regulator fails when the cable binds as a result of poor tension. This Dorman OE FIX replacement regulator incorporates cable tension springs to combat cable reel binding.
Product Features:
See More
Product Features:
- Improved replacement – this window regulator and motor assembly features enhancements over the original design for greater reliability
- Failure-resistant design – features cable tension springs to resist cable reel binding from insufficient tension
- Simple replacement – no special tools are required to install this regulator assembly
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
KAI – Driver Side Front Inner Fender Liner Splash Shield (Part No.BM1250119)
from
$17.99
New Standard Replacement Driver Side Front Inner Fender Liner Splash Shield, 07-10 335I, 1-13 All E92 Coupe, E93 Convertible
Product Features:
See More
Product Features:
- 07-10 335I, 1-13 All E92 Coupe, E93 Convertible, Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
StrongArm – Trunk Lift Support: 14.5" Ext Length, 4.0" Travel, 78 Lbs of Force, 1 Pk (Part No.E6651)
from
$26.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
Carquest Premium – Door Window Switch (Part No.WSC2728)
from
$205.99
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Aftermarket – Fender Liner Access (Part No.O9082939836AFT)
from
$9.57
Fender Liner Access
KAI – Bumper Cvr Reflector (Part No.BM1084102C)
from
$38.99
Bumper Cvr Reflector
Original Equipment – Emblem Retainer (Part No.O5019319717OEA)
from
$1.30
Emblem Retainer
BBR Automotive – Door Sill Plate Clip (Part No.O90961334927BBR)
from
$1.52
Door Sill Plate Clip
Burco – Side View Replacement Mirror (Part No.5341)
from
$59.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Aftermarket – Engine Splash Shield (Part No.Q1022939717AFT)
from
$105.55
Engine Splash Shield
Aftermarket – Grille Insert (Part No.O5006939800AFT)
from
$58.54
Grille Insert
Aftermarket – Regulator Sliding Pi (Part No.O303657568AFT)
from
$5.00
Regulator Sliding Pi
APA/URO Parts – Hood Stop Buffer (Part No.O2042459684APA)
from
$8.99
Hood Stop Buffer
ULO – Door Mirror Cover (Part No.O5090921936ULO)
from
$62.53
Door Mirror Cover
Aftermarket – Trim Fastener (Part No.O607280833AFT)
from
$1.71
Trim Fastener
Burco – Side View Replacement Mirror (Part No.4267)
from
$49.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Vaico – Screw (Part No.Y2003392470VCO)
from
$1.46
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality. Screw with washer. 4.8 x 16 MM
See More
Original Equipment – Rocker Panel Molding (Part No.Q50041612976OEA)
from
$1.82
Rocker Panel Molding
Dorman – Integrated Door Lock Actuator (Part No.937-801)
from
$223.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
- Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
- Safety compliant – part has undergone simulated crash testing under government guidelines
- Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
KAI – Fender (Part No.BM1241138V)
from
$63.99
New Economy Replacement Passenger Side Fender
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
VDO – Fuel Door Actuator (Part No.E2016396008VDO)
from
$105.55
Fuel Door Actuator
Original Equipment – Trim Fastener (Part No.Q2010670855OEA)
from
$1.24
Trim Fastener
Original Equipment – Molding Clip (Part No.O50371334908OEA)
from
$1.47
Molding Clip
Vaico – Rivet, Plastic Spread Rivet (Part No.Q2001406550VCO)
from
$0.87
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More
Upgrade your 2008 BMW 328Xi with Top-Quality Body Parts
When it comes to maintaining or upgrading your 2008 BMW 328Xi, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Body Parts are key to keeping your 328Xi functioning at its best. At Advance Auto Parts, we offer a wide selection of 109 Body Parts for the 2008 BMW 328Xi, designed to meet your needs without breaking the bank.
From
Vehicle Mirror
replacements to
Vehicle Windows
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2008 BMW 328Xi at great prices.
Our Body Parts inventory for this model
ranges from just $0.87 to $369.67, with
an average price of $71.20.
Our 109 Body Parts in stock come from 24 trusted brands, so you’re sure to find the right part for your 2008 BMW 328Xi without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 BMW 328Xi, we stock popular OEM and aftermarket Body Parts from top names
like StrongArm Dorman, and more.
StrongArm Body Parts
start at just $14.79 and boast an impressive 5 stars average rating from customers.
With 40 customer reviews and counting, our 2008 BMW 328Xi Body Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2008 BMW 328Xi is always ready to roll. We’re committed to providing you with everything you need to keep your 328Xi in top shape, all in one place.
Start shopping confidently below for your 2008 BMW 328Xi!
Best-Selling Vehicle Mirrors for 2008 BMW 328Xis
Enhance the driving experience in your BMW with 9 quality Vehicle Mirror components, starting at $32.99.
K-Source – Passenger Car Replacement Glass: Driver Side, Flat Glass, Includes Mounting Tape and Instructions (Part No.99274)
from
$32.99
Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- The most economical way to replace cracked Mirror glass
- Glass measures 3 13/16″ tall by 6 13/16″ wide and 6 7/8″ diagonally
- This glass fits Mirrors with Heated Power function only
- Mounting tape included for low-hassle stick-on installation
- Step-by-step instructions for easy installation
ULO – Door Mirror Cover (Part No.O5090921936ULO)
from
$62.53
Door Mirror Cover
K-Source – Passenger Car Replacement Mirror: Passenger Side, Convex, Includes Backing Plate (Part No.30274)
from
$69.99
Heated Replacement Mirror Glass Assembly. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- Replace your cracked or broken passenger side Mirror glass at a fraction of the dealer cost
- Wiring harness must be unplugged from existing backing plate and plugged into the new backing plate before installation
- Original equipment quality, fit, and function
- Step-by-step instructions for easy installation
- Heated
K-Source – Passenger Car Replacement Mirror: Driver Side, Flat, Includes Backing Plate (Part No.33274)
from
$69.99
Heated Replacement Mirror Glass Assembly. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- Replace your cracked or broken driver side Mirror glass at a fraction of the dealer cost
- Wiring harness must be unplugged from existing backing plate and plugged into the new backing plate before installation
- Original equipment quality, fit, and function
- Step-by-step instructions for easy installation
- Heated
Original Equipment – Mirror Glass Replacement (Part No.O5070395333OEA)
from
$369.67
The Original Equipment Mirror Glass Replacement is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE Quality
- Direct replacement for a proper fit every time
- Available for left and right sides of vehicle
ULO – Mirror Glass Replacement (Part No.O5070395329ULO)
from
$157.07
The ULO mirror glass replacement provides an option to replace only the damaged or missing glass, and not the entire mirror assembly.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Available for left and right sides of vehicle
Burco – Heated Side View Mirror Replacement with Backing Plate (Part No.7147HRSG)
from
$129.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.4267)
from
$49.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.4074)
from
$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Most Popular 2008 BMW 328Xi Vehicle Windows
Customize your BMW with 13 Vehicle Windows products
like Window Regulators,
Window Regulator Sliding Pivots, and
Window Lift Rails, all
priced under $187.29.
Dorman – Window Regulator: Power, 1 Pack (Part No.749-469)
from
$58.99
The original equipment window regulator fails when the cable binds as a result of poor tension. This Dorman OE FIX replacement regulator incorporates cable tension springs to combat cable reel binding.
Product Features:
See More
Product Features:
- Improved replacement – this window regulator and motor assembly features enhancements over the original design for greater reliability
- Failure-resistant design – features cable tension springs to resist cable reel binding from insufficient tension
- Simple replacement – no special tools are required to install this regulator assembly
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Dorman – Window Regulator: Power, 1 Pack (Part No.749-468)
from
$58.99
The original equipment window regulator fails when the cable binds as a result of poor tension. This Dorman OE FIX replacement regulator incorporates cable tension springs to combat cable reel binding.
Product Features:
See More
Product Features:
- Improved replacement – this window regulator and motor assembly features enhancements over the original design for greater reliability
- Failure-resistant design – features cable tension springs to resist cable reel binding from insufficient tension
- Simple replacement – no special tools are required to install this regulator assembly
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
BBR Automotive – Regulator Sliding Pi (Part No.O303657568BBR)
from
$2.36
Regulator Sliding Pi
Original Equipment – Power Window Regulator (Part No.O3040185561OEA)
from
$187.29
Without Electric Motor The Original Equipment brand Window Regulator is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OEM-Quality and Direct Fit replacement
- OEM factory connections and fittings
- Original Equipment Manufacturer
Original Equipment – Power Window Regulator (Part No.O3040185569OEA)
from
$186.62
Without Electric Motor The Original Equipment brand Window Regulator is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OEM-Quality and Direct Fit replacement
- OEM factory connections and fittings
- Original Equipment Manufacturer
VDO – Window Regulator (Part No.O3040290668VDO)
from
$144.33
Window Regulator
WSO – Power Window Regulator (Part No.O3040185536WSO)
from
$106.17
Without Electric Motor The WORLD SOURCEONE Power Window line includes window regulators and motor-regulator assemblies that are competitively priced against remanufactured units and do not require a core trade-in. All WSO window regulators and regulator-motor assemblies come complete and ready for easy installation. The OE quality means increased installer confidence with fewer comebacks. Coverage includes European, and Asian passenger cars and light trucks.
Product Features:
See More
Product Features:
- Superior, reliable performance compared to competitive products
- Identical to OE for simplified installation and no comebacks
- Durable construction including long life motors, gears, cables and case
- Factory original equipment connectors
- No additional time consuming steps needed for installation
- Vehicle specific fit and function
- Manufactured in ISO Certified facilities
Autopart International Inc – Window Regulator (Part No.O30401954554API)
from
$85.59
Window Regulator
Autopart International Inc – Window Regulator (Part No.O30401999509API)
from
$67.19
Window Regulator
KAI – Rear Passenger Side Power Window Regulator Assembly (Part No.BM1551111)
from
$37.99
New Standard Replacement Passenger Side Rear Power Window Regulator Assembly, Without Motor
Product Features:
See More
Product Features:
- Without Motor, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rear Driver Side Power Window Regulator Assembly; Without Motor Fits Sedan/Wagon (Part No.BM1550111)
from
$33.99
New Standard Replacement Driver Side Rear Power Window Regulator Assembly, Without Motor
Product Features:
See More
Product Features:
- Without Motor, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Aftermarket – Regulator Sliding Pi (Part No.O303657568AFT)
from
$5.00
Regulator Sliding Pi
Autopart International Inc – Window Reg. Rail Sli (Part No.O31821932488API)
from
$2.48
Window Reg. Rail Sli
Top Picks for 2008 BMW 328Xi Bodies and Fender Parts
Upgrade BMW 328Xis with top-quality Bodies and Fender Parts parts, including 32 OEM and aftermarket selections for your 2008 model.
Rein – Suspension Bump Stop (Part No.AVZ0293P)
from
$11.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
- Matches Original Equipment design specifications
- Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
Aftermarket – Fender Liner Access (Part No.O9082939836AFT)
from
$9.57
Fender Liner Access
Aftermarket – Fender Liner Access (Part No.O9082939837AFT)
from
$10.06
Fender Liner Access
Le Bra – Front End Cover (Part No.551147-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Le Bra – Front End Cover, Vinyl, Black (Part No.551146-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
Aftermarket – Fender Liner (Part No.O9073939896AFT)
from
$107.72
Fender Liner
Aftermarket – Engine Splash Shield (Part No.Q1022939717AFT)
from
$105.55
Engine Splash Shield
KAI – Fender Splash Shield (Part No.BM1250114C)
from
$65.99
New CAPA Certified Standard Replacement Driver Side Fender Liner/Splash Shield, Front Section, Sedan And Wagons With 3.0 Liter Engines, Without M Package
Product Features:
See More
Product Features:
- Front Section, Sedan And Wagons With 3.0 Liter Engines, Without M Package, Made Of Polyethylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Covercraft – Custom Hood Protector (Part No.45024-01)
from
$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!
Product Features:
See More
Product Features:
- Protects vehicle’s hood from bugs or rock chips
- Low profile, aerodynamic design
- Installs in less than 5 minutes, no tools required
- Custom fit exactly to your vehicle
- Leather grain vinyl
KAI – Passenger Side Front Inner Splash Shield; 3.0L Engine; Front Half Section (Part No.BM1251114C)
from
$63.99
New CAPA Certified Standard Replacement Passenger Side Fender Liner/Splash Shield, Front Section, 3.0 Liter Engines, Sedan And Wagon Without M Package
Product Features:
See More
Product Features:
- Front Section, 3.0 Liter Engines, Sedan And Wagon Without M Package, Made Of Polyethylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Splash Shield (Part No.BM1251110C)
from
$63.99
New CAPA Certified Standard Replacement Passenger Side Fender Splash Shield, Rear Section, Sedan And Wagon
Product Features:
See More
Product Features:
- Rear Section, Sedan And Wagon, Made Of Polyethylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender (Part No.BM1241138V)
from
$63.99
New Economy Replacement Passenger Side Fender
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Splash Shield (Part No.BM1250110C)
from
$62.99
New CAPA Certified Standard Replacement Driver Side Fender Splash Shield, Rear Section, Sedan And Wagon
Product Features:
See More
Product Features:
- Rear Section, Sedan And Wagon, Made Of Polyethylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Driver Side Front Inner Splash Shield, 3.0L Engine, Front Half Section (Part No.BM1250114)
from
$53.99
New Standard Replacement Driver Side Fender Liner/Splash Shield, Front Section, Sedan And Wagons With 3.0 Liter Engines, Without M Package
Product Features:
See More
Product Features:
- Front Section, Sedan And Wagons With 3.0 Liter Engines, Without M Package, Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Passenger Side Front Inner Splash Shield, 3.0L Engine, Front Half Section (Part No.BM1251114)
from
$52.99
New Standard Replacement Passenger Side Fender Liner/Splash Shield, Front Section, 3.0 Liter Engines, Sedan And Wagon Without M Package
Product Features:
See More
Product Features:
- Front Section, 3.0 Liter Engines, Sedan And Wagon Without M Package, Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Passenger Side Front Fender Splash Shield, Rear Half Of 2 Piece, Sedan And Wagon (Part No.BM1251110)
from
$42.99
New Standard Replacement Passenger Side Fender Splash Shield, Rear Section, Sedan And Wagon
Product Features:
See More
Product Features:
- Rear Section, Sedan And Wagon, Made Of Polyethylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Splash Shield (Part No.BM1250110)
from
$42.99
New Standard Replacement Driver Side Fender Splash Shield, Rear Section, Sedan And Wagon
Product Features:
See More
Product Features:
- Rear Section, Sedan And Wagon, Made Of Polyethylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Aftermarket – Fender Liner (Part No.O9073939855AFT)
from
$41.60
Fender Liner
Febi – Shock Bump Stop (Part No.L4041272318FEB)
from
$36.28
Shock Bump Stop
KAI – Fender Splash Shield (Part No.BM1250115)
from
$23.99
New Standard Replacement Driver Side Fender Liner/Splash Shield, Front Section, With Sport Package
Product Features:
See More
Product Features:
- Front Section, With Sport Package, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Liner (Part No.BM1248100)
from
$19.99
New Standard Replacement Driver Side Fender Liner, Rear Section, E92/E93
Product Features:
See More
Product Features:
- Rear Section, E92/E93, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Driver Side Front Inner Fender Liner Splash Shield (Part No.BM1250119)
from
$17.99
New Standard Replacement Driver Side Front Inner Fender Liner Splash Shield, 07-10 335I, 1-13 All E92 Coupe, E93 Convertible
Product Features:
See More
Product Features:
- 07-10 335I, 1-13 All E92 Coupe, E93 Convertible, Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rein – Shock Bump Stop (Part No.L4041243559RIN)
from
$15.90
Rein’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style shocks
- Are built with design and quality that matches or exceeds OE quality
APA/URO Parts – Shock Bump Stop (Part No.L4041243559APA)
from
$10.76
Shock Bump Stop
Febi – Strut Bellows / Dust Boot (Part No.L3037243850FEB)
from
$8.02
The Febi Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Manufactured with design and quality that matches or exceeds OE quality
- Resistant to oil and other contaminants
Original Equipment – Rocker Panel Molding (Part No.Q50041612976OEA)
from
$1.82
Rocker Panel Molding
Vaico – Door Panel Clip, Natural (Part No.O3030413227VCO)
from
$1.79
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More
Original Equipment – Molding Clip (Part No.O50371334908OEA)
from
$1.47
Molding Clip
Vaico – Screw (Part No.Y2003392470VCO)
from
$1.46
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality. Screw with washer. 4.8 x 16 MM
See More
Original Equipment – Emblem Retainer (Part No.O5019319717OEA)
from
$1.30
Emblem Retainer
Original Equipment – Trim Fastener (Part No.Q2010670855OEA)
from
$1.24
Trim Fastener
BBR Automotive – Emblem Retainer (Part No.O5019319717BBR)
from
$1.22
Emblem Retainer
In-Demand Vehicle Doors for 2008 BMW 328Xis
Select from 18 premium Vehicle Doors parts for your 2008 BMW 328Xi, with prices ranging from $1.16 to $223.99.
Dorman – Door Lock Actuator (Part No.O3020961338DOR)
from
$201.96
Restore the ease and convenience of remotely locking or unlocking any one of your vehicle’s doors with Dorman’s Door Lock Actuator Motor. The actuator returns the power door lock to proper operation-and our robust plastic housing helps protect the actuator from damage, ensuring year after year of service.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- High quality electric motor
- Durable construction
- Vehicle try-on testing has been conducted on this part to ensure trouble-free performance
Dorman – Integrated Door Lock Actuator (Part No.937-801)
from
$223.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
- Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
- Safety compliant – part has undergone simulated crash testing under government guidelines
- Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
Dorman – Integrated Door Lock Actuator (Part No.937-800)
from
$218.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
- Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
- Safety compliant – part has undergone simulated crash testing under government guidelines
- Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
Dorman – Integrated Door Lock Actuator (Part No.937-825)
from
$191.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
- Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
- Safety compliant – part has undergone simulated crash testing under government guidelines
- Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
Dorman – Integrated Door Lock Actuator (Part No.937-824)
from
$188.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
- Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
- Safety compliant – part has undergone simulated crash testing under government guidelines
- Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
BBR Automotive – Trim Fastener (Part No.O6072378581BBR)
from
$1.68
Trim Fastener
BBR Automotive – Trim Fastener (Part No.O607280835BBR)
from
$1.16
Trim Fastener
Aftermarket – Door Latch Assembly (Part No.O3027420732AFT)
from
$168.92
Door Latch Assembly
Aftermarket – Door Latch Assembly (Part No.O3027420731AFT)
from
$147.71
Door Latch Assembly
Vaico – Door Check (Part No.O3010405543VCO)
from
$77.87
Door Check
Vaico – Door Check (Part No.O3010378413VCO)
from
$70.01
Door Check
Original Equipment – Trim Fastener (Part No.O6072378581OEA)
from
$2.09
Trim Fastener
Vaico – Trim Fastener (Part No.O60721613464VCO)
from
$2.09
Trim Fastener
Aftermarket – Trim Fastener (Part No.O607280833AFT)
from
$1.71
Trim Fastener
BBR Automotive – Trim Fastener (Part No.O607280832BBR)
from
$1.58
Trim Fastener
BBR Automotive – Door Sill Plate Clip (Part No.O90961334927BBR)
from
$1.52
Door Sill Plate Clip
BBR Automotive – Door Panel Clip (Part No.O30301863218BBR)
from
$1.50
Door Panel Clip
Aftermarket – Trim Fastener (Part No.O607280835AFT)
from
$1.16
Trim Fastener
Most Sold 2008 BMW 328Xi Vehicle Hoods
Explore our best-selling BMW parts for the 2008 328Xi among 13 OEM and aftermarket options starting from $8.99.
Stabilus – Gas Charged Trunk Strut (Part No.O2064378552STB)
from
$54.53
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.
Product Features:
See More
Product Features:
- Restores the original opening and closing speeds of your hood, hatch or trunk
- Easy-to-install
- No special tools required
- Engineered for your application
- Easy lifting and reduced closing effort
- Consistent lifting force through 50,000 cycles
- Rust-resistant piston rod extends product life
- Dynamic damping technology, available on select lift supports
StrongArm – Trunk Lift Support: 14.5" Ext Length, 4.0" Travel, 78 Lbs of Force, 1 Pk (Part No.E6651)
from
$26.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
StrongArm – Hood Lift Support: 15.58" Ext Length, 5.75" Travel, 79 Lbs of Force, 1 Pk (Part No.E6650)
from
$14.79
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
Dorman – Hood Release Cable Assembly (Part No.912-470)
from
$23.29
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this hood release cable is made to match the original cable on specific vehicles.
- Durable construction -manufactured within strict tolerances for reliable longevity.
- Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Atlas Lift – Lift Support (Part No.LS10701)
from
$24.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
aFe POWER – Dynamic Air Scoop (Part No.54-11478-R)
from
$175.99
Dynamic air scoops are constructed out of lightweight black powder coated aluminum and simply install behind the kidney bean grille. Increased air velocity and flow improves performance and throttle response.
Product Features:
See More
Product Features:
- Lightweight For Strength and Styling
- Directs Frontal Air Into Intake System For Max. Performance
- No Cutting Or Drilling On OEM Parts
- Fast Installation
Stabilus – Gas Charged Hatch Strut (Part No.O2070331186STB)
from
$65.26
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.
Product Features:
See More
Product Features:
- Restores the original opening and closing speeds of your hood, hatch or trunk
- Easy-to-install
- No special tools required
- Engineered for your application
- Easy lifting and reduced closing effort
- Consistent lifting force through 50,000 cycles
- Rust-resistant piston rod extends product life
- Dynamic damping technology, available on select lift supports
Stabilus – Trunk Strut (Part No.O2064331180STB)
from
$43.18
Trunk Strut
BBR Automotive – Hood Strut (Part No.O2020331176BBR)
from
$35.01
Hood Strut
StrongArm – Liftgate Lift Support: 21.50" Ext Length, 8.0" Travel, 82 Lbs of Force, 1 Pk (Part No.C7073)
from
$29.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
Autopart International Inc – Trunk Strut (Part No.O20642212544API)
from
$29.41
Trunk Strut
Atlas Lift – Lift Support (Part No.LS11820)
from
$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
APA/URO Parts – Hood Stop Buffer (Part No.O2042459684APA)
from
$8.99
Hood Stop Buffer
Top-Rated Body Parts Brands For Your 2008 BMW 328Xi
Shop for the best-rated brands offering Body Parts and other products for your 2008 BMW 328Xis. Below you’ll find some of our best rated Body Parts from StrongArm and Dorman, and more. Body Parts from these brands that fit a 2008 328Xi start at just $14.79 and are rated as high as 5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular StrongArm 2008 BMW 328Xi Body Parts
When it comes to maintaining or upgrading your 2008 BMW 328Xi, using quality Body Parts is essential to ensure durability and a perfect fit. StrongArm ticks all of those boxes. We offer a wide selection of StrongArm Body Parts, specifically designed for the 2008 BMW 328Xi. With over 3 StrongArm brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.79, with an average price of just $23.92. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our StrongArm Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$29.99
$29.99
This product is not rated
Liftgate Lift Support: 21.50" Ext Length, 8.0" Travel, 82 Lbs of Force, 1 Pk
“”
from
$14.79
$14.79
This product is not rated
Hood Lift Support: 15.58" Ext Length, 5.75" Travel, 79 Lbs of Force, 1 Pk
“”
from
$26.99
$26.99
(1)
Trunk Lift Support: 14.5" Ext Length, 4.0" Travel, 78 Lbs of Force, 1 Pk
“The strut broke at the top socket.”
Popular Dorman 2008 BMW 328Xi Body Parts
Dorman auto parts is one of the highest quality Body Part brands in the market. Any 2008 BMW 328Xi owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2008 328Xi, Advance Auto Parts carries a full inventory of 10 Dorman Body Parts. Plus you will be keeping your BMW in peak condition while saving money because prices on these Dorman Body Parts range from $23.29 to $223.99, plus, with more than 16 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.
FAQs for 2008 BMW 328Xi Body Parts
Which Body Parts are best-sellers for 2008 BMW 328Xis?
Out of 109 Body Parts that fit 2008 BMW 328Xis, the following parts are the top sellers:
- Hood Lift Support: 15.58" Ext Length, 5.75" Travel, 79 Lbs of Force, 1 Pk (11619459) – $14.79
- Integrated Door Lock Actuator (11396300) – $71.99
- Trunk Lift Support: 14.5" Ext Length, 4.0" Travel, 78 Lbs of Force, 1 Pk (11619454) – $26.99
What’s the price range for 2008 BMW 328Xi Body Parts?
Body Part prices for the 2008 BMW 328Xi start at $0.87 and go up to $369.67 for the most premium parts.
What’s the average price of a Body Part for a 2008 BMW 328Xi?
The average price for Body Parts for the 2008 BMW 328Xi is $71.20. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Body Parts for other BMW 328Xi model years?
Yes, we currently carry Body Parts for 1 model years of BMW 328Xis between 2007 and 2007. Body Parts are bought most frequently for the following model years: 2007.
What are the cheapest Body Parts for my 2008 BMW 328Xi?
The cheapest 2008 BMW 328Xi Body Parts we carry in stock are:
- Rivet, Plastic Spread Rivet (10794797) – $0.87
- Trim Fastener (12487475) – $1.16
- Trim Fastener (12000633) – $1.16
- Emblem Retainer (12487541) – $1.22
- Trim Fastener (12013650) – $1.24
What are the top-rated Body Parts that fit the 2008 BMW 328Xi?
Out of 40 reviews by customers, our 2008 BMW 328Xi Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 2008 BMW 328Xi and their top-rated products:
- Vehicle Windows
- Window Regulator: Power, 1 Pack (10193359) – $58.99
- Window Regulator: Power, 1 Pack (10193385) – $58.99
- Vehicle Hoods
- Window Regulator: Power, 1 Pack (10193359) – $58.99
- Window Regulator: Power, 1 Pack (10193385) – $58.99
What types of Body Parts do you sell for my 2008 BMW 328Xi?
As of 2/5/25, these are some of the most in-demand types of Body Parts for a 2008 BMW 328Xi:
Can I get help with 2008 BMW 328Xi Body Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Body Parts and more.
What is your return policy for BMW 328Xi Body Parts?
Advance Auto Parts keeps returns simple. For new BMW 328Xi Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
