Name: Steering Rack Boot Kit
Brand: Lemfoerder
SKU: M1030242493LEM
Price: 16.58 USD

from

$16.58

Steering Rack Boot Kit

from

$297.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$49.16

P/S Pump Pulley

from

$249.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 20mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$58.99

Not your typical remove and replace bushing kit but simple installation means great for the DIYer’s. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as ‘lost motion’ of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.

Product Features:

Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

from

$58.99

Not many know but worn suspension bushings have an effect on braking performance. In particular these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$145.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$320.82

This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$86.99

Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$12.52

Power Steering Reservoir Cap

from

$15.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

All Rein automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. note: control arm bushing kits contain the needed pair.

from

$78.64

Track Rod

from

$48.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$45.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$72.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
Complete assembly – includes reservoir and reservoir cap
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$48.14

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$108.96

Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties
High ball stud articulation angles.

from

$14.82

Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:

Unique polyurethane alternative
Sleeves in the bushings freely rotate which enhances longevity
Impregnated with graphite to aid in lubrication and reduce noise
Alternative to conventional rubber suspension bushings

from

$1.46

Washer

from

$467.99

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

100% replacement of rubber sealing components.
Application of specialized lubricant(s) for extended life.
Finished in protective coating to prevent corrosion and rust.
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$19.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$94.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$79.82

Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.

Product Features:

Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
Comes with bolts and washers (where applicable)
Easy to install
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

from

$85.35

The Lemfoerder Guide Rod is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Bushings resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$93.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$91.70

The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$62.99

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$49.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.