Name: Timing Chain Tension
Brand: Aftermarket
SKU: A5110283309AFT
Price: 307.44 USD

from

$307.44

Timing Chain Tension

from

$138.30

All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:

Built-in circuit protection to ensure your electronics and computer systems stay unharmed
High reliability of pressure sensing proved in gasoline and diesel direct injection systems
Sturdy design, vibration resistant and thermal stability

from

$108.26

The Lemfoerder Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise.

from

$17.99

Innovative engineering, manufacturing technology And quality control ensure that Spectra Premium engine oil Level sensor covers meet or exceed the performance of the original equipment they replace.

Product Features:

Manufactured with high quality plastic material to provide a better dimensional stability than OE
Gasket is made of high quality rubber to ensure it maintains its dimensional characteristics even in extreme cold/hot weather variations seen in the North American market
Fit tested on the oil pans its designed for, to ensure an easy installation
Leak tested with the cover plate installed on the oil pan to ensure a proper seal and prevent leaks, which can result in costly repairs
Includes gasket and mounting bolts a complete installation solution

from

$41.10

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

Original Equipment Quality
Excellent wear resistance
Low propensity to seize
Reduction in Friction

from

$924.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$34.75

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$79.99

Oil Pump Chain

from

$203.46

WARNING: This item cannot be returned for a replacement or refund if opened! OE identical sealing solutions for the aftermarket. The Elwis brand is synonymous with consistently high quality, outstanding delivery performances and – most importantly – innovative sealing solutions to the automotive aftermarket. Elwis unrivalled expertise in the field of advanced sealing solution engineering and management is passed on to our automotive aftermarket customers in the form of superb pricing, reliability and performance. All Elwis parts perform at least identically to their original counterparts.

Product Features:

OE Identical quality
Outstanding delivery performance
Innovative sealing solution

from

$18.91

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$538.99

When turbochargers fail, the common response is the replacement of the entire unit. However, the damage is often isolated within the turbo cartridge, which contains the core components of the turbo assembly. By replacing just the cartridge, the remaining components can be salvaged and repair times reduced. CARDONE cartridges are assembled with O.E.-grade components to ensure high performance and durability.

Product Features:

Eliminates the need to replace the entire turbocharger
Allows for reuse of the original compressor and turbine housings
Direct O.E. replacement
Allows for replacement of turbocharger without the need for balancing
Supplied with O.E.-grade components for durability

from

$7.79

This engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications. Level marks are clearly distinguished and properly gauged for accuracy.

Product Features:

Ideal replacement – this engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications
Ideal solution – level marks are clearly distinguished and properly gauged for accuracy
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$169.99

New Platinum Pro Passenger Side Turbocharger Intercooler/Charge Air Cooler, 2.0 Liter L4 Engine, To Vin 7803500

Product Features:

2.0 Liter L4 Engine, To Vin 7803500, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$2.99

Rein Automotive bolt and hardware kits are manufactured with premium materials and are direct replacements for the OE. Kits include all necessary bolts to complete a specific repair.

Product Features:

Includes all the bolts needed to complete the job.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Manufactured to strict engineering standards and specifications for materials and tolerances.
Restores the vehicle to safe and optimal performance levels.
Aluminum bolts are torque to yield and must be replaced once they are removed.

from

$6.10

Turbo Boost Solenoid

from

$11.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$23.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.98

Crankshaft Pulley Bolt

from

$32.99

The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output

from

$591.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$782.75

ContiTech Timing Belt Kits come complete with all the synchronous parts needed to do a timing belt repair quickly and efficiently. Professional repair technicians only need one box to do the entire job. And drivers enjoy a safe and reliable product that stands the test of time. On average, it takes about 2-4 hours to do a timing belt repair whether professional repair technicians replace just the belt or all the corresponding parts at the same time. Since the time and difficulty is already allocated to do the repair, the return on labor hours is greater when changing the entire drive belt system. From the belt to the tensioner and/or idler, all ContiTech Timing Belt Kits contain only OE-quality components. In fact, many of ContiTech kits exceed OEM quality specifications.

Product Features:

OE-Equivalent and a direct fit application.
Precision molded teeth.
Low noise operation.
Resistant to high temperatures.
Durable long life performance.

from

$150.73

Turbo Oil Supply Pip

from

$914.47

Febi’s partner for engine timing is the renowned chain specialist IWIS. The German company is market leader in the timing chain sector and renowned for the top quality of its products. IWIS supplies timing chains for all Febi kits. Febi manufactures the remaining components for the timing chain kits to OE quality at its headquarters in Ennepetal. High quality parts are particularly important in engine timing to avoid costly engine damage. febi bilstein gives a 5-year or 100,000 km quality guarantee with its timing chain kits (subject to use of the correct engine oil recommended by the manufacturer). Febi timing chain kits contain all wear parts required for a high quality repair of the chain drive. To ensure a long engine life, all components of the timing chain kit should be replaced.

Product Features:

Contains everything you need to replace an engine timing chain in your vehicle
Offering the quality, reliability, and durability of OE
Manufactured to OE specification for fit, form, and function

from

$194.01

Oil Cooler

from

$31.15

New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommended that the lifters are allowed to Settle for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, some valves will contact the piston. This will cause the valve to break at the collect groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

from

$36.64

Oil Dipstick Tube

from

$24.69

Valley Pan Gasket

from

$113.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including the

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.