2007 Sterling Truck Condor Car Parts & Accessories

Carquest Premium Fuel Spin-on Filters protect your engine and fuel system by removing dirt, rust, and other impurities from the fuel before it reaches your engine fuel system. These filters effectively remove contaminants to prevent clogging and damage to fuel injectors, pumps and other critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the fuel clean, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA
• Includes Integral Post Seal
• Thread size is 7/8-14 in.

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Fuel Spin-on Filters protect your engine and fuel system by removing dirt, rust, and other impurities from the fuel before it reaches your engine fuel system. These filters effectively remove contaminants to prevent clogging and damage to fuel injectors, pumps and other critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the fuel clean, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Fuel/Water Separator Filters remove water and other impurities from the fuel before it reaches your engine fuel system. These filters effectively separate water from the fuel, preventing corrosion and damage to fuel injectors, pumps and other critical engine components. By keeping the fuel clean and water-free, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel/Water Separator Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Includes Integral Post Seal. Port Thread: 1 1/4-10
• CAUTION: Furnished O-Ring must be installed on Post for Seal.

Carquest Premium Fuel/Water Separator Filters remove water and other impurities from the fuel before it reaches your engine fuel system. These filters effectively separate water from the fuel, preventing corrosion and damage to fuel injectors, pumps and other critical engine components. By keeping the fuel clean and water-free, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel/Water Separator Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Front End Check Valve
• Application engineered media which aids in stripping water in diesel fuels
• Patent pending drain, metal end caps, which hold media in place
• Rust resistant can, ensuring no leakage from inside
• Made in USA
• Includes Front End Check Valve

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.

Carquest Premium Fuel/Water Separator Filters remove water and other impurities from the fuel before it reaches your engine fuel system. These filters effectively separate water from the fuel, preventing corrosion and damage to fuel injectors, pumps and other critical engine components. By keeping the fuel clean and water-free, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel/Water Separator Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• contains Integral Post Seal; Sensor Port Thread: 1/2-20
• Includes Integral Post Seal. Sensor Port Thread: 1/2-20

Carquest Premium Fuel/Water Separator Filters remove water and other impurities from the fuel before it reaches your engine fuel system. These filters effectively separate water from the fuel, preventing corrosion and damage to fuel injectors, pumps and other critical engine components. By keeping the fuel clean and water-free, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel/Water Separator Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• contains Integral Post Seal; Sensor Port Thread: 1/2-20
• Includes Integral Post Seal. Sensor Port Thread: 1/2-20
• CAUTION: Furnished O-Ring must be installed on post for seal.

Carquest Premium Fuel/Water Separator Filters remove water and other impurities from the fuel before it reaches your engine fuel system. These filters effectively separate water from the fuel, preventing corrosion and damage to fuel injectors, pumps and other critical engine components. By keeping the fuel clean and water-free, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel/Water Separator Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Application engineered media which aids in stripping water in diesel fuels
• Patent pending drain, metal end caps, which hold media in place
• Rust resistant can, ensuring no leakage from inside
• Made in USA
• Includes Sensor Port Thread: 1/2-20
• CAUTION: Furnished D-Ring must be installed on post for seal.

Heavy Duty blade designed to fit wide saddle wiper arms which are typcially found on Class A RV’s, Transit Buses and Heavy Duty Trucks. 

Product Features:

• All metal blade frame for strength and durability
• Black finish resembles original blade
• Fits wide saddle wiper arms

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

• Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
• Provides greater durability and flexibility – 35% stronger than all previous versions
• Features specially treated cords for added strength, stability and reliability
• Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

• Meets SAE J20R4, Class D-2 requirements
• Features a high strength knitted reinforcement and synthetic EPDM rubber construction
• Resistant to standard coolants, ozone and other detrimental environmental elements
• PLEASE NOTE: Priced and sold by inch. See store for details.

Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:

• Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
• Premium OE technology to ensure peak performance under extreme conditions
• Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
• Meets or exceeds OE quality

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides maximum performance at extreme, extended operating temperatures
• Crack and wear resistant construction, even in extreme temperatures
• Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
• A problem-solving tool designed for the toughest applications
• Consistently outperforms other heavy-duty coil belts on the market
• Designed to save your fleet’s money and reduce downtime
• Replacement of the tensioner is recommended (if equipped)

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:

• Engineered to handle operating conditions with temperatures up to 130°C (266°F)
• Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
• Capable of delivering excellent performance in high torque and high power pulse applications
• Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at extremely prolonged operating temperatures
• Heavy-duty construction resists cracking, wear, oil and heat
• A special compound ensures unmatched stability, load capacity and belt life.
• Unique notch pattern offers greater flexibility for smaller diameter pulleys
• Troubleshooter for troubled drives
• Designed to save your fleet’s money and reduce downtime
• Meets RMA oil and heat resistance standards and static conductivity requirements

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at prolonged extreme operating temperatures
• Construction resists cracking and wear, even at extreme temperatures
• Special compound provides unmatched flexibility, stability, load capacity and belt life
• Problem solver designed for the toughest applications
• Consistently outperforms other heavy-duty serpentine belts on the market
• Designed to save your fleet money and reduce downtime
• It is recommended to replace the tensioner (if equipped)

This Heavy Duty Truck and Bus tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Specifically designed for a wide variety of trucks and buses with a Cummins ISB/ISC/ISL engine. New mounting bolt included. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

• Designed and engineered by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys.
• Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
• Installation instructions included.
• Heavy Duty Electro-deposited coated (e-coat) Steel Pulley for superior corrosion resistance.
• Professional Mechanics will change this tensioner in approx. 1/2 hour
• Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:

• Designed to prevent fluctuations to the tensioner body for longer service life.
• Reduces the risk of noise and helps avoid housing separation
• Includes pulleys with lubricated bearings for longer lasting performance
• Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability

Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.

Product Features:

• Optimized components engineered for maximum strength and durability
• Patented design ensures superior belt alignment and tension, improving transmission cost-effectiveness and service life
• The patented labyrinth seal prevents contamination of internal parts for maximum durability and life.
• Long-life steel pulleys with dust cover to protect internal bearings from contamination
• Double-row bearings carry more load and last up to 3 times longer than two individual bearings
• Round chrome-silicone torsion spring for less fatigue than coil spring designs.
• Its patented damping mechanism provides maximum stability, reduces vibration and extends the life of the belt, tensioner and other components of the accessory belt drives

This Heavy Duty Truck and Bus tensioner is designed and engineered by one of the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Includes a new mounting bolt for ease of installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

• Designed and engineered by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys.
• Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
• Installation instructions and new mounting bolt included.
• Heavy Duty Electro-deposited coated (e-coat) Steel Pulley for superior corrosion resistance.
• Professional Mechanics will change this tensioner in approx. 1/2 hour
• Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

• Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
• EPDM rubber constructions resist cracking on the rib surface
• Meets or exceeds all original equipment manufacturer specifications.
• It is recommended to replace the tensioner (if equipped)
• Unique form grinding of each individual belt assures precise dimensional control.
• Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

• Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
• Forged Heavy Duty Steel Pulley designed to displace bearing heat. Precision machined face for smooth running surface. Tandem 6303 Ball Bearings for extended life.
• Installation instructions included.

Product Features:

• Fiber-loaded rubber mount adds flexibility along the belt and provides greater lateral stability on the pulley
• Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
• Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
• Resistant to oil, heat, ozone, weathering, and aging for better belt life.
• Meets or exceeds SAE J636C specifications

Heavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems. For a maintenance free connection, install with Power-Grip SB clamps. Approved for marine applications.

Product Features:

• Green strip construction offers the best cost per mile
• Abrasion resistant cover
• Engineered with materials to resist electrochemical degradation
• Reduces water loss from water permeating the hose wall and cover
• Exceeds SAE 20R1 Type EC (Class D-1 tube and cover Standard Wall)
• Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
• Note: For a maintenance-free connection, use PowerGrip SB clamps
• Caution: Do not use for fuel or oil transportation applications.
• PLEASE NOTE: Item is priced and sold by the foot. See store for details.

Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

• Meets SAE J20R4, Class D-2 requirements
• Features a high strength knitted reinforcement and synthetic EPDM rubber construction
• Resistant to standard coolants, ozone and other detrimental environmental elements
• Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
• PLEASE NOTE: Priced and sold by inch. See store for details.

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05 antifreeze/coolant uses the highest-quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications.
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05® antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

PEAK FLEET CHARGE SCA Pre-charged 50/50 Prediluted Antifreeze + Coolant is a Fully Formulated, ethylene glycol-based coolant, Pre-charged with advanced technology Supplemental Coolant Additives (SCAs). Because it is SCA Pre-charged, FLEET CHARGE SCA Pre-charged Antifreeze + Coolant requires no SCAs at initial fill and ensures proper chemistry at every top-off. FLEET CHARGE SCA Pre-charged Antifreeze + Coolant uses a low silicate and phosphate-free formulation.

Product Features:

• Works in ALL heavy-duty diesel, gasoline and natural gas engine cooling systems. FLEET CHARGE is a low silicate, low total dissolved solids antifreeze which can be used in all heavy duty applications.
• Optimum protection against freezing and boil over.
• Provides corrosion protection of all cooling system metals and components.
• Incorporates nitrite to provide wet sleeve liner protection against cavitation.
• Designed to last the life of the engine when maintained with a high quality SCA ?lter system.
• Eliminates SCA mixing errors at initial ?ll. Phosphate free formula reduces the risk of scale.
• Testing Requirements: For proper freeze and boil over protection, use a traditional refractometer or hydrometer to measure the percentage of ethylene glycol by volume.

Prestone Command Nitrites (NOAT) Extended Life (ELC) antifreeze+coolant (ready to use) is designed to work with all Class 6-8 vehicles. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. It is compatible with any Nitrites OAT engine. This formula is Nitrites and provides excellent protection for aluminum and all other engine metals. Command NOAT ELC protects against liner pitting and corrosion protections.

Product Features:

• Nitrites Extended Life Coolant – NOAT ELC – Red formula. Compatible with any Nitrites OAT
• Helps lower maintenance costs and improve water pump life when compared to ESI coolants
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985; TMC RP329A, RP338A, RP364; Cummings CES 14439; Cat EC-1 and many OEM requirements
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

PEAK FINAL CHARGE Global Full Strength Extended Life Coolant/Antifreeze is an Organic Acid Technology (OAT), globally formulated, ethylene glycol-based coolant, which uses organic acid inhibitors (non-2-EH) to provide guaranteed protection for all cooling system metals. With proper maintenance, (1) FINAL CHARGE Global Extended Life Coolant/Antifreeze delivers guaranteed cooling system protection for ONE MILLION MILES of on-road use (8 years or 20,000 hours of off-road use) without the use of Supplemental Coolant Additives (SCAs). FINAL CHARGE Global Extended Life Coolant/Antifreeze is nitrite-free, phosphate-free, silicate-free, and borate-free. (1)Proper maintenance requires a complete cooling system flush and fill – and subsequent topping off, as needed – with FINAL CHARGE Global Extended Life 50/50 Pre-diluted Coolant/Antifreeze or Final Charge Global Extended Life Coolant/Antifreeze and water. For guaranteed protection, no other products or product supplements may be used.

Product Features:

• Works in ALL heavy duty diesel, gasoline and natural gas engine cooling systems
• Guaranteed protection for ONE MILLION MILES of on-road use (8 years or 20,000 hours of off-road use) (Proper maintenance requires a complete cooling system flush and fill – and subsequent topping off, as needed)
• Eliminates the need for SCAs and chemically charged ?lters & Excellent heat transfer for high temperature applications such as engines with EGR and SCR systems
• Outstanding protection against corrosion and cavitation. Non-abrasive formula can improve water pump seal life.
• Eliminates drop-out, gel and reduces scale.
• Can be mixed with other coolants (to maintain corrosion protection contamination levels should be kept below 25%). Provides exceptional long term elastomer compatibility
• Testing Requirements: For proper freeze and boil over protection, use a traditional refractometer or hydrometer to measure the percentage of ethylene glycol by volume.

Prestone Command Nitrites (NOAT) Extended Life (ELC) antifreeze+coolant (Concentrate) is designed to work with all Class 6-8 vehicles. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. It is compatible with any Nitrites OAT engine. This formula is Nitrites and provides excellent protection for aluminum and all other engine metals. Command NOAT ELC protects against liner pitting and corrosion protections.

Product Features:

• Nitrites Extended Life Coolant – NOAT ELC – Red formula. Compatible with any Nitrites OAT
• Helps lower maintenance costs and improve water pump life when compared to ESI coolants
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985; TMC RP329A, RP338A, RP364; Cummings CES 14439; Cat EC-1 and many OEM requirements
• Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

Prestone Command Cor-Guard Nitrite Free (NF-OAT) Extended Life (ELC) antifreeze+coolant (Concentrate) is designed to work with all Class 1-8 vehicles; Heavy Duty and Light Duty. COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Utilizing Cor-Guard technology, this formula is designed to protect cooling system parts from corrosion and damage. It instantly protects against the spread of rust, corrosion, pitting, gunk, grime and build-up. It is one fluid that can be used for the whole fleet; all vehicles, coolant colors (LD) and any Nitrite Free OAT engine (HD). Service life is 1,000,000 Miles/20,000 hrs [class 7-8 with wet sleeve liners]. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. This formula is Nitrite Free, provides excellent protection for aluminum and all other engine metals and eliminates the need to add supplemental coolant additives.

Product Features:

• Cor-Guard Nitrite Free Extended Life Coolant – NF-OAT ELC – RED formula. Compatible with any Nitrite Free OAT and all Light Duty vehicles
• COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Instantly stops the spread of rust, corrosion, pitting, gunk, grime and build-up
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985, D7583; TMC RP338A, RP364; Cummings CES 14603, bulletin 3666132; Detroit Diesel 93K217; Cat EC-1 and many OEM requirements
• Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

Prestone Command Cor-Guard Nitrite Free (NF-OAT) Extended Life (ELC) antifreeze+coolant (ready to use) is designed to work with all Class 1-8 vehicles; Heavy Duty and Light Duty. COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Utilizing Cor-Guard technology, this formula is designed to protect cooling system parts from corrosion and damage. It instantly protects against the spread of rust, corrosion, pitting, gunk, grime and build-up. It is one fluid that can be used for the whole fleet; all vehicles, coolant colors (LD) and any Nitrite Free OAT engine (HD). Service life is 1,000,000 Miles/20,000 hrs [class 7-8 with wet sleeve liners]. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. This formula is Nitrite Free, provides excellent protection for aluminum and all other engine metals and eliminates the need to add supplemental coolant additives.

Product Features:

• Cor-Guard Nitrite Free Extended Life Coolant – NF-OAT ELC – RED formula. Compatible with any Nitrite Free OAT and all Light Duty vehicles
• COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Instantly stops the spread of rust, corrosion, pitting, gunk, grime and build-up
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985, D7583; TMC RP338A, RP364; Cummings CES 14603, bulletin 3666132; Detroit Diesel 93K217; Cat EC-1 and many OEM requirements
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated
• High grade stainless steel and copper construction
• Meets or exceeds OEM standards

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated
• High grade stainless steel and copper construction
• Meets or exceeds OEM standards

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated
• High grade stainless steel and copper construction
• Meets or exceeds OEM standards

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Gates carries a huge line of water pumps for heavy duty applications. Our heavy duty water pump offering is designed to handle rugged Fleet standards.

Product Features:

• Our heavy-duty water pump offering is designed to handle severe and rigorous conditions
• Fully tested unitized bearings and seals
• Computerized machined surfaces for proper fit and sealing
• Gates heavy-duty water pumps are represented as a part number with an HD suffix
• Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
• New pumps manufactured to ISO/TS 16949 standards

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

• 100% tested for reliable performance
• Durable housing features precisely machined mounting surface for proper sealing and fitment
• Equipped with weep chamber or similar feature to help prevent unnecessary replacement
• Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
• All gaskets or seals necessary for water pump are included
• This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
• This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
• This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

• 100% tested for reliable performance
• Durable housing features precisely machined mounting surface for proper sealing and fitment
• Equipped with weep chamber or similar feature to help prevent unnecessary replacement
• Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
• All gaskets or seals necessary for water pump are included
• This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
• This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
• This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

• 100% tested for reliable performance
• Durable housing features precisely machined mounting surface for proper sealing and fitment
• Equipped with weep chamber or similar feature to help prevent unnecessary replacement
• Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
• All gaskets or seals necessary for water pump are included
• This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
• This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
• This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• 
  
  

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
• O-rings, seals or thread sealant are included if required
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413