2007 Nissan Titan Towing Products

Easily route towing electrical functions into the truck bed for 5th wheel trailers, while retaining electrical functions at the rear of the vehicle.

Product Features:

• Easily Route Towing Electrical Functions Into The Truck Bed For Fifth Wheel Trailers
• Reinforced 90 degree angle
• Plugs into OEM wiring system
• Easy to install

Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit includes the accessories needed to get you towing faster.

Product Features:

• Plug-In Simple® Wiring Kit
• Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
• Includes Vehicle Side 4 Flat
• Corrosion Resistant Terminals
• Impact And Corrosion Resistant
• Includes Dust Cover And Grease Packet To Prevent Corrosion
• Includes Step-By-Step Instructions

A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle’s factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Nissan Armada, Frontier, NV1500, NV200, NV2500, NV3500, Pathfinder, Titan, Titan XD, Xterra, Infiniti QX56, QX60 and QX80 (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. They’re also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.

Product Features:

• Allows a CURT trailer brake controller to be plugged into OEM socket
• Quick plug harness installs with plug-and-play convenience
• Wire colors match standard brake controller harnesses
• Includes 24″ of 12 gauge wire for flexible installation
• Slit-loom sleeve keeps wires contained and protected

There is nothing like the luxury and power that go along with heavy-duty towing. 5th wheel RVs offer a deluxe, home-away-from-home experience unlike any other, while gooseneck trailers possess a strength that far surpasses most other trailer options. As with any trailer, however, 5th wheels and goosenecks must be equipped with the proper lighting and electrical systems, and tend to require even more complex connectors than a standard receiver-type trailer setup. Make things simple with a CURT 5th wheel / gooseneck extension harness. These wiring harnesses are designed to put an extra connector socket in the bed of your pickup truck while still retaining power to the rear connector socket mounted on your bumper or trailer hitch. This is done by plugging into the back of the existing original equipment (OEM) harness and routing through the body of the truck to a hole in the truck bed, providing a connector that is ready to accommodate your 5th wheel or gooseneck trailer. These CURT extension harnesses are designed to work with 7-way RV blade connectors and come with 7′ of wire. Ten harnesses are included in each package. They are compatible with certain models of Chevrolet, Dodge, Ford, GMC, Nissan, Ram and Toyota (see application to verify fitment). When you need a towing electrical solution that allows you to switch back and forth between your receiver hitch and specialized trailer hitch, CURT gets you plugged in.

Product Features:

• Routes a 7-way RV blade socket into truck bed while retaining use of rear socket
• Simple plug-and-play design eliminates the need for cutting or splicing
• Allows for easy connection of 5th wheel or gooseneck wiring
• 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
• 7′ extension with right-angle plugs for easy installation
• Spring-loaded dust cover keeps connector clean when not in use
• Slit loom keeps wires contained and well protected

There is nothing like the luxury and power that go along with heavy-duty towing. 5th wheel RVs offer a deluxe, home-away-from-home experience unlike any other, while gooseneck trailers possess a strength that far surpasses most other trailer options. As with any trailer, however, 5th wheels and goosenecks must be equipped with the proper lighting and electrical systems, and tend to require even more complex connectors than a standard receiver-type trailer setup. Make things simple with a CURT 5th wheel / gooseneck extension harness. These wiring harnesses are designed to put an extra connector socket in the bed of your pickup truck while still retaining power to the rear connector socket mounted on your bumper. This is done by plugging into the back of the existing original equipment (OEM) harness and routing through the body of the truck to a hole in the truck bed, providing a connector that is ready to accommodate your 5th wheel or gooseneck trailer. This CURT extension harness is designed to work with 7-way RV blade connectors and comes in a length of 10′. It is compatible with certain models of Chevrolet, Dodge, Ford, GMC, Nissan, Ram and Toyota (see application to verify fitment). When you need a towing electrical solution that allows you to switch back and forth between your receiver hitch and specialized trailer hitch, CURT gets you plugged in.

Product Features:

• Routes a 7-way RV blade socket into truck bed while retaining use of rear socket
• Simple plug-and-play design eliminates the need for cutting or splicing
• Allows for easy connection of 5th wheel or gooseneck wiring
• 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
• 10′ extension with right-angle plug for easy installation
• Spring-loaded dust cover keeps connector clean when not in use
• Slit loom keeps wires contained and well protected

By incorporating Endurance design features that include oversized hinges, internal grommets for enhanced weather proofing and a lid that opens 180 degrees, this connector is guaranteed to last for years of trouble free use. Multi-Tow® design feature adds multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing. Four hole mount installation for standard mounting brackets.

Product Features:

• Endurance Professional Grade
• Plug-In Simple!® Wiring Kit
• Utilizes OEM connectors create an exact fit and maximum weatherproofing
• Multi-Tow® provides multiple towing options from one connector
• Weatherproof lid opens 180 degrees
• Oversized hinge offers ultimate durability
• Superior Ergonomics
• For Use w/Factory Tow Package
• Impact And Corrosion Resistant

The 47285 brake control utilizes time based actuation for applying braking power to the trailer brakes. The built-in digital display makes it easy for setting braking intensity. The braking force to the trailer can easily be adjusted from 5% to 99% for setting the exact percentage of brake power desired. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:

• Time-Based Braking
• Mounts At Any Angle
• Percentage Of Braking Power Shown
• Fully Digital Settings
• Intuitive Vertical Manual Slide
• Short Proof Protected
• Controls Up To 4 Trailer Brakes

The 47225 brake control utilizes time based actuation for applying braking power to the trailer brakes. An LED indicator will glow displaying braking intensity. The brighter the glow, the more braking force is being applied to the trailer brakes. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:

• Smart LED Display Shows Trailer Connection
• Braking Function/Short circuit Notification
• Changes Green To Yellow As Power Increases
• Plug In Simple Feature
• Intuitive vertical manual slide
• Short Proof Protected
• Controls up to 4 trailer brakes

New trucks are becoming more car-like every year making it almost impossible to install a traditional brake controller. With the InSIGHT brake control, you gain the flexibility needed to make a simple, no tools required installation in any vehicle. This three part system allows the driver to bring the display back in sight where they can see what is going on as well as bringing the controls within a comfortable reach whether you are right or left handed. Mount the brain of the system out of sight. So, no more banging your knee every time you get in and out of your vehicle. This proportional brake controller creates stops that are safe and smooth, making you feel like you aren’t even towing a trailer! With easy to set gain adjustments and a digital display will make setting this brake control quick and easy. Seven On-the-fly sensitivity settings allows you to adjust for trailer weights and weather at the press of a button. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:

• Proportional braking
• No Tools Required Installation, no drilling required
• Percentage of braking power shown
• 7 Sensitivity Settings for Advanced Braking Control
• Intuitive vertical manual slide
• Short Proof Protected
• Controls up to 8 trailer brakes

Reduce your brake control installation time to minutes! Many of today’s tow vehicles come with an O.E.M. connector harness under the dash. This harness simply plugs into the tow vehicle and then splices onto the Hopkins brake control to complete the install.

Product Features:

• Blunt Cut Wires Allows For Installation Of Any Brake Control
• 36 in. Wire Length
• OEM. Connector Plugs Directly Into Tow Vehicle
• For Vehicles With A Factory Tow Package
• Includes Step-By-Step Instructions And Diagrams
• Includes All Necessary Mounting Hardware
• For Use On Any 12 Volt Negative Ground System

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Nissan Titan (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
• Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty. Adapter sold separately, required for install.

Product Features:

• Mounts To Front Of Vehicle
• Can Be Permanent Or Detachable
• Free spooling; Mechanical Lock
• Sealed Against Elements; Can Be Used Under Water
• Stainless Steel Tie Bars And Fasteners
• Reversible Mounting
• Limited Warranty

Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.

Product Features:

• Mounts To Front Of Vehicle
• Can Be Permanent Or Detachable
• Free spooling; Mechanical Lock
• Sealed Against Elements; Can Be Used Under Water
• Stainless Steel Tie Bars And Fasteners
• Reversible Mounting
• Limited Warranty

Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.

Product Features:

• Mounts To Front Of Vehicle
• Can Be Permanent Or Detachable
• Free spooling; Mechanical Lock
• Sealed Against Elements; Can Be Used Under Water
• Stainless Steel Tie Bars And Fasteners
• Reversible Mounting
• Limited Warranty

Add light mounts to your Dee Zee Aluminum or Steel Headache Rack or Rear Rack. With these convenient mounts that slide into the built in channel system, mounting your auxiliary lights is quick and easy. Several size options to meet your needs.

Product Features:

• Made From Rugged Steel
• Protective Gloss Black Powder Coat Finish
• Utilize The Accessory Channel On Aluminum Cab Racks
• Several Size Options To Meet Your Needs
• Made In USA

The Husky Ford, Chevrolet, GM, and Nissan gooseneck and chain tie down kit allows you to easily and safely secure your gooseneck trailer to your OEM 5th Wheel or Gooseneck Prep Packaged equipped Ram truck. The gooseneck ball is 2-5/16 Inch diameter, installs easily (no tools required), is constructed from billet heat treated alloy steel, and has a durable polished chrome finish. The gooseneck ball is rated at 35,000 Pound GTW And 8,7500 Pound tongue weight using the SAE J2638 Standard. Each kit includes, 2-5/16 Inch 35,000 Pound Gooseneck Ball Chain tie downs Durable Storage Bag Instructions and carries a 10 year limited warranty.

Product Features:

• 35,000 Pound Capacity Gooseneck Ball
• Fits Both Short And Long Bed Trucks
• Fits Trucks Equipped With Both Standard And Factory Auto Level Rear Air Suspension
• Durable Storage Bag Included
• Gooseneck, Gooseneck Ball, And Fasteners Meet The SAE J2638 Standard
• Quick Installation

CURT fixed ball gooseneck hitches are built to deliver all the towing power you need to tackle the demands of the job, without breaking the bank. When your day starts the moment you climb into the seat of that full-size 4×4 pickup, your towing equipment needs to be a reliable extension of your truck. CURT fixed ball gooseneck hitches are a permanent towing solution that offer reliable strength at an economical price. This CURT fixed ball hitch features an over-bed design, installing directly on top of your truck bed using CURT over-bed gooseneck installation brackets. It offers a gross trailer weight capacity up to 30,000 lbs. to allow you to tow whatever heavy-duty trailer you need, from point A to point B, whether a livestock trailer full of horses, a flatbed piled with building materials or a car hauler carrying a backhoe. This fixed ball gooseneck hitch also comes with a standard 2-5/16″ gooseneck trailer ball welded onto a thick 12″ x 12″ steel plate. The fixed design ensures the ball can never be loosened or stolen, increasing safety on the road and preventing theft. Also, to ensure that CURT fixed ball gooseneck hitches can indeed be called CURT hitches, we finish them in a durable carbide powder coat that provides the necessary protection against rust, wear and other everyday threats you meet off the beaten path. For the best quality and durability in gooseneck towing, CURT is the obvious choice. We carefully engineer, test and manufacture our gooseneck hitches to meet today’s safety standards and exceed all expectations. For a gooseneck hitch with all the quality of a CURT hitch and the economy to keep your wallet full, there is nothing like a CURT fixed ball gooseneck hitch.

Product Features:

• Accepts up to 30,000 lbs. GTW and 7,500 lbs. vertical load limit
• 2-5/16″ trailer ball fits all standard gooseneck trailers
• Permanently attached gooseneck ball eliminates theft and loss
• Protected by a highly durable carbide powder coat finish
• Reinforcement required to reach max gross trailer weight rating
• Safety chain hookup loops #66113 sold separately
• Assembled in USA
• Limited lifetime warranty (one-year finish, one-year parts)

A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Nissan Titan (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:

• Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
• Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
• Made with a vehicle-specific design for a custom fit
• Provides a convenient mount for hitch accessories
• Ideal for attaching a snow plow, cargo carrier or other front hitch mount
• Allows for easy maneuvering of a trailer into a tight spot
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit