2007 Nissan Pathfinder Drivetrains
More 2007 Nissan Pathfinder Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2007 Nissan Pathfinder, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2007 Nissan Pathfinder Drivetrains
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Autopart International Inc – Axle Assembly (Part No.K40001995102API)
from
$125.57
Axle Assembly
Yukon Gear – Dura Grip Posi For ’04 & Up Nissan Titan Rear (Part No.26029)
from
$1180.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Nissan Titan rear
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Rugged Ridge – Locking Hub (Part No.15001.61)
from
$357.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Yukon Gear – AxleShaft (Part No.21829)
from
$339.99
AxleShaft
National – Bearings (Part No.JLM704649)
from
$28.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M802011)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.B-228)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Steel Cover For Nissan Titan M226 Rear (Part No.32334)
Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)
from
$3.99
Product Features:
See More
- Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
Yukon Gear – Ring Gear Bolt, 1/2" (Part No.33036)
from
$10.99
Ring gear bolt for Jeep JK front & rear and Nissan Titan rear, 1/2″.
Product Features:
See More
Product Features:
- Ring gear bolt for Jeep JK front and Nissan Titan rear
- 1/2″ bolt
Driveworks – Tapered Roller Bearing (Part No.S-JLM-704610)
Driveworks – Wheel Bearing (Part No.S-RW-114-R)
Yukon Gear – Replacement Pinion Flange For Dana 44, ’04-’07 Nissan Titan Rear (Part No.41188)
from
$334.99
Product Features:
See More
- Fits 2004-2007 Nissan Titan rear
- 29 spline
- Round companion flange
National – Multi Purpose Seal (Part No.710922)
from
$19.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Compatible with most oils and EP lubricants at higher operating temperatures
- High resistance to oxidation and ozone and has low swell in hydrocarbon fluids
- Temperature range: -20°F to 300°F; -29°C to 149°C
- National® oil seals are recognized worldwide for their quality and reliable performance for every type of repair.
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)
from
$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Cardone – Front Drive Shaft: Greasable, Direct Replacement (Part No.65-9480)
from
$728.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
USA Standard Gear – Master Overhaul Kit for Nissan M226 Rear Differential (Part No.37104)
from
$419.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Nissan M226 rear
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush, silicone and gasket.
Yukon Gear – Grizzly Locker For Nissan Titan Rear With 32 Splines (Part No.28028)
from
$1119.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!
Product Features:
See More
Product Features:
- Fits Nissan Titan rear
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Driveworks – Transfer Case Output Shaft Seal (Part No.S-224266)
Driveworks – Tapered Roller Bearing (Part No.S-HM-803110)
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Dorman – Spindle Nut (Part No.K1002754968DOR)
from
$14.26
Spindle Nut
Yukon Gear – Nissan Titan Crush Sleeve (Part No.33129)
from
$46.99
Nissan Titan crush sleeve, front differential. Approx 1.400″ long.
Product Features:
See More
Product Features:
- Crush sleeve
- Fits Nissan Titan rear
- 1.400″ tall
Beck/Arnley – Cu Joint Boot Kit (Part No.103-3102)
from
$43.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
MTC – Differential Drain P (Part No.J7058947963MTC)
from
$2.06
Differential Drain P
Popular 2007 Nissan Pathfinder Drivetrains Categories
2007 Nissan Pathfinder Drivetrains
You count on your 2007 Nissan Pathfinder to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 115 Drivetrains ranging in price from $2.06 to $1,180.00, you’re sure to find everything you need for your 2007 Nissan Pathfinder.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 19 different brands like Valvoline, Moog, and Driveworks. 2007 Nissan Pathfinder Drivetrains start as low as $2.06!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,440 extensive product reviews on 2007 Nissan Pathfinder Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.4 stars and Greaseable Super Strength Universal Joint with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2007 Nissan Pathfinder below to get started!
Top-Rated Drivetrains Brands For Your 2007 Nissan Pathfinder
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2007 Nissan Pathfinder running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Motive Gear Drivetrains
You’ll find popular Motive Gear brand products across Differentials. All are waiting to get your 2007 Nissan Pathfinder back on the road. Some of the top-rated Motive Gear products in these categories are:
Top-Rated Valvoline Drivetrains
If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Drivetrains for your 2007 Nissan Pathfinder, and some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2007 Nissan Pathfinder Drivetrains
What are the most purchased Drivetrains for the 2007 Nissan Pathfinder?
Out of 115 Drivetrains for the 2007 Nissan Pathfinder, the most popular in our inventory are:
What are the top-rated 2007 Nissan Pathfinder Drivetrains?
Top-rated Drivetrains for your 2007 Nissan Pathfinder based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
