2007 Nissan Maxima Exhaust Mufflers
More 2007 Nissan Maxima Exhaust Mufflers
Find your specific 2007 Nissan Maxima original or aftermarket Exhaust Mufflers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2007 Nissan Maxima Exhaust Mufflers
Ishino Stone – Cat. Converter Gaske (Part No.H4001419199ISH)
from
$13.72
Cat. Converter Gaske
Mahle – Exhaust Gasket (Part No.H4000176633MAH)
from
$10.22
Exhaust Gasket
Ishino Stone – Exh. Man. to Pipe Ga (Part No.H400345615ISH)
from
$8.29
Exh. Man. to Pipe Ga
Ishino Stone – Exh. Man. to Pipe Ga (Part No.H400331407ISH)
from
$4.03
Exh. Man. to Pipe Ga
Nippon Reinz – Exh. Man. to Pipe Ga (Part No.H4003116591NRZ)
from
$6.00
Exh. Man. to Pipe Ga
Bosal – EXHAUST GASKET (Part No.H400040155BSL)
from
$13.39
EXHAUST GASKET
Ishino Stone – Exh. Man. to Pipe Ga (Part No.H400329446ISH)
from
$3.96
Exh. Man. to Pipe Ga
HJS – Cat. Converter Gaske (Part No.H4001653551HJS)
from
$7.81
Cat. Converter Gaske
BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.278-025)
from
$242.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.
Product Features:
See More
Product Features:
- Based on the original OEM design for a guaranteed perfect fit
- No welds inside the silencer
- Easy installation
- Aluminized steel construction for maximum durability
- Constructed to reduce flex and withstand vehicle vibration
- External drain hole extends muffler life by allowing moisture to escape
- Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.53711)
from
$166.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)
from
$153.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18886)
from
$157.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.54877)
from
$337.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.145-363)
from
$237.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.
Product Features:
See More
Product Features:
- Based on the original OEM design for a guaranteed perfect fit
- No welds inside the silencer
- Easy installation
- Aluminized steel construction for maximum durability
- Constructed to reduce flex and withstand vehicle vibration
- External drain hole extends muffler life by allowing moisture to escape
- Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18491)
from
$81.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.54295)
from
$217.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Autopart International Inc – Muffler Assembly (Part No.H50012016807API)
from
$367.84
Muffler Assembly
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18567)
from
$123.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – 60 Delta Flow Muffler – 2.00 Center In / 2.00 Center Out – Moderate Sound (Part No.952060)
from
$142.99
The 60 series incorporates Flowmaster’s patented Delta Flow technology to produce a mellow tone, improved power and throttle response on smaller displacement 4 and 6 cylinder vehicles. Generally suited to rear mount installations, use of larger diameter tailpipe/tip will create a deeper tone that is evident both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.145-359)
from
$241.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.
Product Features:
See More
Product Features:
- Based on the original OEM design for a guaranteed perfect fit
- No welds inside the silencer
- Easy installation
- Aluminized steel construction for maximum durability
- Constructed to reduce flex and withstand vehicle vibration
- External drain hole extends muffler life by allowing moisture to escape
- Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
Autopart International Inc – Muffler Assembly (Part No.H50011937911API)
from
$362.89
Muffler Assembly
Popular 2007 Nissan Maxima Exhaust Mufflers Categories
2007 Nissan Maxima Exhaust Mufflers
Maybe you’re in the middle of a full rebuild of that 2007 Nissan Maxima. Maybe you just need a couple of Exhaust Mufflers. Either way, Advance Auto Parts has 3 different Exhaust Mufflers in our inventory ranging from $3.96 to $166.99. That means you can find the exact parts or products you need to keep that 2007 Nissan Maxima running smoothly.
Exhaust Mufflers are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2007 Nissan Maxima. Walker, HJS, and Ishino are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Exhaust Mufflers for your 2007 Nissan Maxima, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Exhaust Mufflers to keep your 2007 Nissan Maxima rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Exhaust Mufflers Brands To Make Your 2007 Nissan Maxima Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2007 Nissan Maxima demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust Mufflers make up Advance Auto Parts’ inventory, and all are ready to help make your Maxima the best it can be. Be sure to browse some of our top Exhaust Mufflers brands and parts.
FAQs for 2007 Nissan Maxima Exhaust Mufflers
What are the most purchased Exhaust Mufflers for the 2007 Nissan Maxima?
Out of 3 Exhaust Mufflers for the 2007 Nissan Maxima, the most popular in our inventory are:
from
$166.99
This product is not rated
Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed
Mufflers
