2007 Nissan Frontier Drivetrains

Essential 2007 Nissan Frontier Drivetrains

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Spartan Spring & Pin Kit, Fits Smaller Designs

from

$26.99
Spartan spring & pin kit, fits smaller designs.

Product Features:
  • Replacement spring and pin kit for Spartan Locker
  • Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
  • Includes 4 springs and 4 alignment pins
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Autopart International Inc – Wheel Bearing (Part No.K80001944039API)

Wheel Bearing

from

$63.40
Wheel Bearing

Dorman – Serrated Wheel Stud (Part No.O8060832868DOR)

Serrated Wheel Stud

from

$3.32
When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Dorman’s engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:
  • Direct replacement for a proper fit every time
  • Corrosion resistant
  • Double-ended studs as well as serrated bolts, and wheel bolts available
  • Over-length and under-length studs available for convenience and ease of installation
See More

Yukon Gear – Steel Cover For Nissan Titan M226 Rear (Part No.32334)

Steel Cover For Nissan Titan M226 Rear

from

$189.99
Product Features:
  • Fits Nissan Titan rear
  • Steel
See More

NDK – Trans Case Shaft Sea (Part No.J5088157261NDK)

Trans Case Shaft Sea

from

$9.78
Trans Case Shaft Sea

Rugged Ridge – Locking Hub (Part No.15001.61)

Locking Hub

from

$357.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r

Product Features:
  • Impact Resistant Nodular Iron
  • Corrosion Resistant
  • Better 4WD Performance
  • Better Fuel Economy
  • Easy Install
See More

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread

from

$7.99
Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
  • 7/8″ x 14 thread
  • 1 5/16″ socket
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

National – Multi Purpose Seal (Part No.711069)

Multi Purpose Seal

from

$23.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

USA Standard Gear – Nissan Titan Spartan Locker Cross Pin Shaft (Part No.17027)

Nissan Titan Spartan Locker Cross Pin Shaft

from

$59.99
Nissan Titan Spartan locker cross pin shaft.

Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Nissan Titan rear
  • Works with Spartan Locker or standard open spider gears
See More

National – Multi Purpose Bearing (Part No.HB-108-D)

Multi Purpose Bearing

from

$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

National – Bearings (Part No.110-CC)

Bearings

from

$92.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spicer – Universal Joint (Part No.5-1410X)

Universal Joint

from

$51.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Yukon Gear – Grizzly Locker For Nissan Titan Rear With 32 Splines (Part No.28028)

Grizzly Locker For Nissan Titan Rear With 32 Splines

from

$1119.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:
  • Fits Nissan Titan rear
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Master Overhaul Kit For Nissan Titan Rear Differential (Part No.14172)

Master Overhaul Kit For Nissan Titan Rear Differential

from

$459.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Nissan Titan rear
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and silicone.
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010182736EMP)

RE CV Joint Boot Kit

from

$29.37
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Yukon Gear – Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear – Approx 0.620" Long (Part No.33097)

Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear - Approx 0.620" Long

from

$5.99
Replacement Crush Sleeve for GM 7.6″ IRS, 8.5″, 8.6″, 8.75″, 8.875″ & Nissan Titan rear. Approx 0.620″ long.

Product Features:
  • Crush sleeve for Jeep JK rear, GM 7.6″ IRS, 8.5″ and 8.6″ and Nissan Titan rear
  • 0.620″ tall
See More

EMPI – Clamp – CV Boot (Part No.4I25091157EMP)

Clamp - CV Boot

from

$2.46
Clamp – CV Boot

National – Bearings (Part No.HM803110)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Seal (Part No.225040)

Multi Purpose Seal

from

$7.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Ring & Pinion Set For ’08 & Up Nissan Titan Rear, 3.13 Ratio (Part No.24584)

Ring & Pinion Set For '08 & Up Nissan Titan Rear, 3.13 Ratio

from

$469.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Nissan Titan rear
  • 8.5″ ring gear diameter
  • 24 spline pinion
  • 10 ring gear bolts
  • 3.13 ratio
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.30209-C)

Bearings

from

$61.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)

ATF for Mercon®V Applications Conventional, 1 Quart

from

$12.99
Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

2007 Nissan Frontier Drivetrains

You count on your 2007 Nissan Frontier to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 111 Drivetrains ranging in price from $2.06 to $1,180.00, you’re sure to find everything you need for your 2007 Nissan Frontier.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 21 different brands like Valvoline, Moog, and Driveworks. 2007 Nissan Frontier Drivetrains start as low as $2.06!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,150 extensive product reviews on 2007 Nissan Frontier Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.4 stars and Greaseable Super Strength Universal Joint with 4.6 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2007 Nissan Frontier below to get started!

Top-Rated Drivetrains Brands For Your 2007 Nissan Frontier

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2007 Nissan Frontier running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

Popular Motive Gear Drivetrains

You’ll find popular Motive Gear brand products across Differentials. All are waiting to get your 2007 Nissan Frontier back on the road. Some of the top-rated Motive Gear products in these categories are:
Differential Pinion Shim Kit
from $7.49
(1)
Differential Pinion Shim Kit
Differential Pinion Shims

Top-Rated Valvoline Drivetrains


If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Drivetrains for your 2007 Nissan Frontier, and some of our most reviewed Valvoline parts include:
ATF for Mercon®V Applications Conventional, 1 Quart
from $12.99
(120)
ATF for Mercon®V Applications Conventional, 1 Quart
Differential Oil

FAQs for 2007 Nissan Frontier Drivetrains

What are the most purchased Drivetrains for the 2007 Nissan Frontier?

Out of 111 Drivetrains for the 2007 Nissan Frontier, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $25.99
(143)
Greaseable Premium Universal Joint
U-Joints
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints

What are the top-rated 2007 Nissan Frontier Drivetrains?

Top-rated Drivetrains for your 2007 Nissan Frontier based on customer reviews/ratings are:
Universal Joint
from $15.99
(65)
Universal Joint
“Good price and exact fit”
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
Greaseable Super Strength Universal Joint
from $36.99
(35)
Greaseable Super Strength Universal Joint
“Good ujoint”