2007 Mercury Mariner Exhaust Parts

Name: HM Grade Federal / EPA Compliant Manifold Catalytic Converter
Brand: MagnaFlow
SKU: 50811
Price: 911.99 USD

Below you will find various in-demand Mercury Exhaust Parts, components and accessories for your 2007 Mariner. Advance Auto Parts has popular Mariner parts like Exhaust Pipes, Exhaust Fittings, Exhaust Manifold and Headers and more. You’ll also find aftermarket and OEM Exhaust Parts for other Mariner model years including 2005, 2006, 2008, 2009, 2010, 2011 and more. Select a category of 2007 Mercury Mariner Exhaust Parts below and start saving instantly.

Popular 2007 Mercury Mariner Exhaust Parts Categories

Exhaust Manifold and Headers

Exhaust Y Pipes

Mufflers

Exhaust System Insulators

Catalytic Converters

Exhaust Manifold and Header Hardware

Exhaust Resonators

Catalytic Converter Gaskets

Exhaust Pipes

Exhaust Manifold Gaskets

Exhaust Clamps

Exhaust Pipe and Flange Gaskets

Exhaust Manifold Nuts

Exhaust Muffler Gaskets

Essential Exhaust Parts for 2007 Mercury Mariners

from

$911.99

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50811 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2001-2008 Ford Escape, 2001-2008 Mazda Tribute, and more, this direct-fit catalytic converter also interchanges with OE parts AJ05-20-55XF and AJ38-20-55X, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$300.99

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24467 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2005-2008 Ford Escape, 2005-2008 Mercury Mariner, and more, this direct-fit catalytic converter also interchanges with OE parts ZZC2-20-500 and ZZC3-20-500, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$773.99

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24367. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2007 Ford Escape, 2001-2006 Mazda Tribute, and more, this direct-fit catalytic converter also interchanges with OE parts AJ03-20-50XL and AJ38-20-50XB, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$1103.99

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452367. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2005 Ford Escape, 2001-2005 Mazda Tribute, and more, this direct-fit catalytic converter also interchanges with OE parts AJ03-20-50XL and AJ38-20-50XB, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$109.99

Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:

RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life

from

$118.99

Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:

CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on

from

$16.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold
Contains all gaskets and seals to remove and replace exhaust manifold

from

$22.62

Exh. Manifold Gasket

from

$25.99

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.73

Exhaust Flange Stud

from

$13.49

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$7.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$5.27

The AP Exhaust / Exhaust Clamp is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$6.49

Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:

whilst developing the exhaust system
BRExhaust also develops the installation hardware to the same standards.
Manufactured from quality materials to ensure maximum durability
Proper fit and functionality to finish your install
Perfect, gas-tight performance
Exhaust accessory that facilitates a complete installation process.
Built to OEM specifications

from

$183.99

This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle—while the interior design of the muffler box ensures quiet performance.

from

$115.99

BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.

Product Features:

Direct-fit configuration
Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
Optimal noise reduction
Low backpressure and corrosion protection
Constructed using 16-gauge aluminized steel
Aluminized steel construction for maximum durability
Constructed to help reduce flex and withstand vehicle vibration

from

$2.79

Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$9.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$191.99

Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$241.99

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$12.62

Exhaust Pipe Gasket

from

$16.35

Cat. Converter Gaske

from

$6.99

Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:

OE DESIGN — Designed with OE-style features for easy installation and fit
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$6.79

Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:

OE DESIGN — Designed with OE-style features for easy installation and fit
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$165.99

This exhaust crossover pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this exhaust crossover pipe is designed to match the fit and function of the original tube on specified applications.
Restores functionality – reliable replacement for an original part that has failed due to heat, vibration or corrosion.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$157.99

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$136.99

BRExhaust exhaust pipes are designed for easy bolt-on installations. Thicker gauge metal prevents the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance. This pipe is engineered to meet OE specs to ensure performance, reliability and a precise factory-like fit. This part features a direct-fit design allowing for easy installation. If you are looking for a replacement exhaust pipe that will fit and perform exactly like the stock one while lasting even longer, BRExhaust is the brand you can rely on.

from

$26.99

Made from quality material for durability, Walker exhaust spout pipes are available in a variety of styles and sizes for direct-fit or universal application.

Product Features:

RESISTS CORROSION — Durable aluminized steel for corrosion resistance and performance
SECURE FIT — Burr-free construction for proper fitment
BETTER TOGETHER — Use quality Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)

Upgrade your 2007 Mercury Mariner with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 2007 Mercury Mariner, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Exhaust Parts are key to keeping your Mariner functioning at its best. At Advance Auto Parts, we offer a wide selection of 49 Exhaust Parts for the 2007 Mercury Mariner, designed to meet your needs without breaking the bank. From Exhaust Pipe replacements to Exhaust Fittings upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2007 Mercury Mariner at great prices. Our Exhaust Parts inventory for this model ranges from just $1.99 to $1,572.99, with an average price of $256.16. Our 49 Exhaust Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 2007 Mercury Mariner without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Mercury Mariner, we stock popular OEM and aftermarket Exhaust Parts from top names like FELPRO, Walker, Dorman, and more. FELPRO Exhaust Parts start at just $4.99 and boast an impressive 5 stars average rating from customers. Walker and Dorman also bring quality to the table, with Exhaust Parts available starting at $1.99, and at an average 4 stars rating. With 384 customer reviews and counting, our 2007 Mercury Mariner Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Mercury Mariner is always ready to roll. We’re committed to providing you with everything you need to keep your Mariner in top shape, all in one place. Start shopping confidently below for your 2007 Mercury Mariner!

Best-Selling Exhaust Pipes for 2007 Mercury Mariners

Enhance the driving experience in your Mercury with 14 quality Exhaust Pipe components, starting at $4.99.

show more show less

from

$7.49

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$8.49

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$239.99

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$4.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$157.99

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$26.99

Made from quality material for durability, Walker exhaust spout pipes are available in a variety of styles and sizes for direct-fit or universal application.

Product Features:

RESISTS CORROSION — Durable aluminized steel for corrosion resistance and performance
SECURE FIT — Burr-free construction for proper fitment
BETTER TOGETHER — Use quality Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)

from

$241.99

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$10.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$115.99

Direct-fit configuration
Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
Optimal noise reduction
Low backpressure and corrosion protection
Constructed using 16-gauge aluminized steel
Aluminized steel construction for maximum durability
Constructed to help reduce flex and withstand vehicle vibration

from

$10.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$183.99

from

$263.99

Manufactured according to strict OE standards
Sturdy design featuring premium-grade materials
Precise fitment
Hassle-free installation and functionality verified by comprehensive testing procedures
Easy installation
Direct-fit exhaust system component that saves installation time

from

$136.99

from

$12.79

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Most Popular 2007 Mercury Mariner Exhaust Fittings

Customize your Mercury with 3 Exhaust Fittings products like Exhaust Clamps, all priced under $6.49.

show more show less

from

$6.49

whilst developing the exhaust system
BRExhaust also develops the installation hardware to the same standards.
Manufactured from quality materials to ensure maximum durability
Proper fit and functionality to finish your install
Perfect, gas-tight performance
Exhaust accessory that facilitates a complete installation process.
Built to OEM specifications

from

$2.49

Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:

CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from quality material for durability and long life
BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

from

$1.99

CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from quality material for durability and long life
BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

Top Picks for 2007 Mercury Mariner Exhaust Manifold and Headers

Upgrade Mercury Mariners with top-quality Exhaust Manifold and Headers parts, including 6 OEM and aftermarket selections for your 2007 model.

show more show less

from

$743.99

This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles.
Convenient kit – includes gaskets and downpipe hardware to simplify installation.
Durable construction -manufactured within strict tolerances for reliable longevity
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$25.99

Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.73

Exhaust Flange Stud

from

$1138.99

Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker Ultra EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
STRONG AND DURABLE — Features thick OE-style flanges and manifolds for strength and durability
OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter

from

$957.99

MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49298 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2001-2008 Ford Escape, 2001-2008 Mazda Tribute, and more, this direct-fit catalytic converter also interchanges with OE parts AJ05-20-55XF and AJ38-20-55X, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$773.99

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

In-Demand Exhaust Mufflers for 2007 Mercury Mariners

Select from 3 premium Exhaust Mufflers parts for your 2007 Mercury Mariner, with prices ranging from $12.62 to $118.99.

show more show less

from

$109.99

RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life

from

$118.99

CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on

from

$12.62

Exhaust Pipe Gasket

Most Sold 2007 Mercury Mariner Exhaust Hangers

Explore our best-selling Mercury parts for the 2007 Mariner among 1 OEM and aftermarket options starting from $6.99.

show more show less

from

$6.99

OE DESIGN — Designed with OE-style features for easy installation and fit
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Top-Rated Exhaust Parts Brands For Your 2007 Mercury Mariner

Shop for the best-rated brands offering Exhaust Parts and other products for your 2007 Mercury Mariners. Below you’ll find some of our best rated Exhaust Parts from FELPRO, Walker, and Dorman, and more. Exhaust Parts from these brands that fit a 2007 Mariner start at just $1.99 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2007 Mercury Mariner Exhaust Parts

When it comes to maintaining or upgrading your 2007 Mercury Mariner, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 2007 Mercury Mariner. With over 6 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99, with an average price of just $14.73. Plus, with over 4 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$10.49

This product is not rated

Exhaust Pipe Flange Gasket

“”

from
$10.29

This product is not rated

Exhaust Pipe Flange Gasket

“”

from
$23.99

This product is not rated

Exhaust Manifold Gasket Set

“”

Popular Walker 2007 Mercury Mariner Exhaust Parts

Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 2007 Mercury Mariner owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 2007 Mariner, Advance Auto Parts carries a full inventory of 18 Walker Exhaust Parts. Plus you will be keeping your Mercury in peak condition while saving money because prices on these Walker Exhaust Parts range from $1.99 to $1,572.99, plus, with more than 94 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

from
$26.99

This product is not rated

Exhaust 36445 Exhaust Pipe Spout

“”

from
$325.99

This product is not rated

Ultra EPA Direct Fit Catalytic Converter 2.25" Outlet (OD)

“”

from
$241.99

This product is not rated

Exhaust Y Pipe

“”

FAQs for 2007 Mercury Mariner Exhaust Parts

Which Exhaust Parts are best-sellers for 2007 Mercury Mariners?

Out of 49 Exhaust Parts that fit 2007 Mercury Mariners, the following parts are the top sellers:

Exhaust 36445 Exhaust Pipe Spout (10082928) – $26.99
EXHAUST MANIFOLD GASKET SET (15780170) – $25.99
Exhaust Flange Stud (11975051) – $15.73

What’s the price range for 2007 Mercury Mariner Exhaust Parts?

Exhaust Part prices for the 2007 Mercury Mariner start at $1.99 and go up to $1,572.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 2007 Mercury Mariner?

The average price for Exhaust Parts for the 2007 Mercury Mariner is $256.16. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Mercury Mariner model years?

Yes, we currently carry Exhaust Parts for 6 model years of Mercury Mariners between 2005 and 2011. Exhaust Parts are bought most frequently for the following model years: 2011, 2010, 2009, 2008, 2006, and 2005.

What are the cheapest Exhaust Parts for my 2007 Mercury Mariner?

The cheapest 2007 Mercury Mariner Exhaust Parts we carry in stock are:

Exhaust Clamp (11012223) – $1.99
Exhaust Clamp (11012137) – $2.49
Exhaust Pipe Flange Gasket (15780726) – $4.99
Exhaust Clamp (11350564) – $6.49
Exhaust 35725 Exhaust System Hanger Insulator (5602106) – $6.99

What are the top-rated Exhaust Parts that fit the 2007 Mercury Mariner?

Out of 384 reviews by customers, our 2007 Mercury Mariner Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2007 Mercury Mariner and their top-rated products:

Exhaust Gaskets
- EXHAUST MANIFOLD GASKET SET (15780170) – $25.99
Exhaust Mufflers
- EXHAUST MANIFOLD GASKET SET (15780170) – $25.99

What types of Exhaust Parts do you sell for my 2007 Mercury Mariner?

As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2007 Mercury Mariner:

Can I get help with 2007 Mercury Mariner Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Exhaust Parts and more.

What is your return policy for Mercury Mariner Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Mercury Mariner Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2007 Mercury Mariner Exhaust Parts

MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50811)

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.24467)

MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.24367)

MagnaFlow – California Grade CARB Compliant Manifold Catalytic Converter (Part No.452367)

Walker – SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) (Part No.18979)

Walker – Quiet-Flow SS Direct Fit Exhaust Muffler Assembly 2" Inlet (ID) 2" Outlet (OD) (Part No.53760)

Felpro – Exhaust Manifold Gasket Set (Part No.MS 96655)

Mahle – Exh. Manifold Gasket (Part No.A8112648114MAH)

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03414B)

Dorman – Exhaust Flange Stud (Part No.H10141184759DOR)

MAHLE Original – Exhaust Pipe Gasket (Part No.F32420)

Victor Reinz – Catalytic Converter Gasket (Part No.71-13632-00)

AP Exhaust – Exhaust Clamp (Part No.H80202393166APE)

BRExhaust – Exhaust Clamp (Part No.250-058)

BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.171-053)

BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.171-671)

Walker – Exhaust Pipe Flange Gasket (Part No.31540)

Felpro – Exhaust Pipe Flange Gasket (Part No.60641)

Walker – Exhaust Y Pipe (Part No.50361)

Walker – Exhaust Y Pipe (Part No.50465)

Felpro – Exhaust Pipe Gasket (Part No.H4006977289FEL)

Mahle – Cat. Converter Gaske (Part No.H40011189895MAH)

Walker – Exhaust 35725 Exhaust System Hanger Insulator (Part No.35725)

Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)

Dorman – Exhaust Manifold Crossover Pipe (Part No.679-021)

Walker – Exhaust Pipe (Part No.52455)

BRExhaust – Direct-Fit Premium Front Pipe (Part No.750-249)

Walker – Exhaust 36445 Exhaust Pipe Spout (Part No.36445)

Walker – Exhaust Pipe Flange Gasket (Part No.31632)

Walker – Exhaust Pipe Flange Gasket (Part No.31578)

Walker – Exhaust Y Pipe (Part No.50433)

Felpro – Exhaust Pipe Flange Gasket (Part No.61194)

Walker – Exhaust Pipe (Part No.52455)

Walker – Exhaust 36445 Exhaust Pipe Spout (Part No.36445)

Walker – Exhaust Y Pipe (Part No.50465)

Felpro – Exhaust Pipe Flange Gasket (Part No.61395)

BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.171-671)

Felpro – Exhaust Pipe Flange Gasket (Part No.61396)

BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.171-053)

BRExhaust – Direct-Fit Premium Front Pipe (Part No.860-669)

BRExhaust – Direct-Fit Premium Front Pipe (Part No.750-249)

Walker – Exhaust Pipe Flange Gasket (Part No.31725)

BRExhaust – Exhaust Clamp (Part No.250-058)

Walker – Exhaust Clamp (Part No.35336)

Walker – Exhaust Clamp (Part No.35335)

Dorman – Manifold Converter – Not Carb Compliant – Not For Sale – NY – CA – ME (Part No.674-831)

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03414B)

Dorman – Exhaust Flange Stud (Part No.H10141184759DOR)

Walker – Ultra EPA Direct Fit Catalytic Converter with Integrated Exhaust Manifold (Part No.16630)

MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49298)

MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.24367)

Walker – SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) (Part No.18979)

Walker – Quiet-Flow SS Direct Fit Exhaust Muffler Assembly 2" Inlet (ID) 2" Outlet (OD) (Part No.53760)

Felpro – Exhaust Pipe Gasket (Part No.H4006977289FEL)

Walker – Exhaust 35725 Exhaust System Hanger Insulator (Part No.35725)