2007 Mazda RX-8 Brake Parts
More 2007 Mazda RX-8 Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 2007 Mazda RX-8, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 2007 Mazda RX-8 Brake Parts
Carquest Wearever – Brake Hardware Kit with Quiet Clip (Part No.13439Q)
from
$18.79
Brakes are designed as a system and all the parts need to work together for best performance. The special design of our brake pad or Abutment clips provide PTFE to reduce friction and rubber compound to virtually eliminate brake noise. Changing your clips is important for ensuring that the brake pads are moving in a uniform and stable motion and not moving freely.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Manufactured with quality materials to suppress high stress levels
- Corrosion resistant for long-lasting durability against harsh roads
- Prevents noise and premature wear
- Direct replacement for a proper fit
- Caliper Bushing included in kit
- Stainless steel dual coating
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-4921)
from
$109.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.18005A)
from
$15.79
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Maintains proper movement for safe, effective stopping performance
- Prevents noise and premature wear
Wearever – Master Cylinder (Part No.11-3205)
from
$98.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K2727)
from
$463.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.
Product Features:
See More
Product Features:
- This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
- PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Multi-Layer rubberized shims provide virtually noise-free braking
- Drilled & Slotted performance rotors provide maximum cooling
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Bolt-on upgrade for stock brakes, no modifications necessary
- Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
- Rotors are zinc plated for maximum protection against rust.
- Buy with confidence from the originator & industry leader of brake kits
World Brake Resources – Ceramic Brake Pads (Part No.N1010415402WBR)
from
$37.63
Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.
Product Features:
See More
Product Features:
- Original Equipment Performance
- Solid Pedal Feel With Smooth Braking Performance
- Ultra-Quiet Ceramic Formulation
- Low Dust – Long Life
- Advanced Material Platform Specific Shims
- Scorched for Easy Break In
- Positive Mold Construction
- All WBR Pads are 100% Shimmed
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000319042WBC)
from
$73.55
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
Carquest Wearever – Brake Rotor (Part No.YH200372)
from
$71.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B2993)
from
$127.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B2992)
from
$127.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Corteco – Brake Hose (Part No.N7000406271CFW)
from
$26.36
Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)
Product Features:
See More
Product Features:
- High durability
- Low volume expansion
- 100% high pressure tested & certified quality
Corteco – Brake Hose (Part No.N7000319702CFW)
from
$53.30
Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)
Product Features:
See More
Product Features:
- High durability
- Low volume expansion
- 100% high pressure tested & certified quality
Carquest Premium – Repair Harness (Part No.PTA2908)
from
$41.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Akebono ProAct – Ceramic Brake Pads Ultra-Premium (Part No.ACT1009)
from
$74.99
Product Features:
See More
- Made in the USA
- OE Manufacturer
- Ceramic Brake Pad
- Low Dust
- Powerful Quiet Stopping
- Ultra-Premium
- Perfect Upgrade for all Braking Systems
Carquest Premium Gold – Semi-Metallic Brake Pads – (4-Pad Set) (Part No.GMKD1009)
from
$54.99
CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000378298WBC)
from
$93.43
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
Bosch – QuietCast Premium Brake Disc (Rotor) (Part No.N1000378298BOS)
from
$116.78
Bosch rotors utilize innovative materials that ensure the very highest quality – and prevent brake judder, noise, vibration and harshness. Bosch QuietCast Premium Disc Brake Rotors utilize vehicle specific castings. The heat flow casting process produces superior G3000, GG20, GG15 and HC (high carbon) casting. Bosch castings provide strength and durability not found in competitive product. While competitors may provide a low cost product which helps save money, their castings can crack and provide poor durability. Bosch QuietCast provides consistent, safe and long lasting performance. Alutherm 80 Coating – Bi-metal aluminum and zinc clean-look coating/Alutherm 80 extends the life of the rotor and provides a clean look for today’s open wheels
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit replacement
- Prevent rust and corrosion with clear-look coating protection
- Provide a clean look for today’s open-wheeled vehicles
- Are 100% balanced for smooth operation
- Factory-engraved edge code and minimum thickness specifications Bosch QuietCast Brake Rotors Brochure
Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.15272)
from
$6.99
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B3249)
from
$83.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B3248)
from
$83.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B3248A)
from
$87.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z26 Street Performance (Part No.K2727-26)
from
$471.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. This PowerStop Z26 Street Warrior Brake Upgrade Kit is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.
Product Features:
See More
Product Features:
- This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
- Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
- Stainless-steel pad shims resist the increased temperatures common on high performance applications
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Drilled & Slotted performance rotors provide maximum cooling
- Bolt-on upgrade for stock brakes, no modifications necessary
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
- Rotors are zinc plated for maximum protection against rust.
- Buy with confidence from the originator & industry leader of brake kits
PowerStop – Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K3146)
from
$221.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.
Product Features:
See More
Product Features:
- This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
- PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Multi-Layer rubberized shims provide virtually noise-free braking
- Drilled & Slotted performance rotors provide maximum cooling
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Bolt-on upgrade for stock brakes, no modifications necessary
- Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
- Rotors are zinc plated for maximum protection against rust.
- Buy with confidence from the originator & industry leader of brake kits
PowerStop – Front Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K3026)
from
$241.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.
Product Features:
See More
Product Features:
- This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
- PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Multi-Layer rubberized shims provide virtually noise-free braking
- Drilled & Slotted performance rotors provide maximum cooling
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Bolt-on upgrade for stock brakes, no modifications necessary
- Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
- Rotors are zinc plated for maximum protection against rust.
- Buy with confidence from the originator & industry leader of brake kits
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14082)
from
$7.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14137)
from
$19.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
Popular 2007 Mazda RX-8 Brake Parts Categories
2007 Mazda RX-8 Brake Parts
You count on your 2007 Mazda RX-8 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 61 Brake Parts ranging in price from $6.79 to $471.99, you’re sure to find everything you need for your 2007 Mazda RX-8.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 15 different brands like Carquest, Cardone, and Carquest Premium. 2007 Mazda RX-8 Brake Parts start as low as $6.79!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 55 extensive product reviews on 2007 Mazda RX-8 Brake Parts. Some of the top-rated Brake Parts products we carry are Brake Rotor with 5.0 stars and Semi-Metallic Brake Pads – (4-Pad Set) with 4.5 stars.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2007 Mazda RX-8 below to get started!
Top-Rated Brake Parts Brands For Your 2007 Mazda RX-8
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2007 Mazda RX-8 running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Carquest Premium, and even more.
Popular Akebono ProAct Brake Parts
You’ll find popular Akebono ProAct brand products across Brake Pads and Shoes. All are waiting to get your 2007 Mazda RX-8 back on the road. Some of the top-rated Akebono ProAct products in these categories are:
Top-Rated Carquest Wearever Brake Parts
If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 2007 Mazda RX-8, and some of our most reviewed Carquest Wearever parts include:
FAQs for 2007 Mazda RX-8 Brake Parts
What are the most purchased Brake Parts for the 2007 Mazda RX-8?
Out of 61 Brake Parts for the 2007 Mazda RX-8, the most popular in our inventory are:
What are the top-rated 2007 Mazda RX-8 Brake Parts?
Top-rated Brake Parts for your 2007 Mazda RX-8 based on customer reviews/ratings are:
