Name: Coil On Plug Boots-5
Brand: DENSO
SKU: 671-5011
Price: 55.99 USD
Rating: 4.5 (10 reviews)

from

$55.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$39.97

An ACDelco GM Original Equipment Ignition Knock (Detonation) Sensor monitors the engine for pinging or spark knock, and is a GM-recommended replacement for your vehicle’s original component. The sensor creates a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses this signal to adjust the ignition timing and air/fuel mixture. This original equipment ignition knock sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Undergo the same stringent testing process as the original part
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$21.99

Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:

Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
Delphi knock sensors prevent against engine damage from pre-ignition knocking
Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
Self-generating piezoelectric design requires no power to the sensor

from

$22.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.

from

$48.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$33.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$19.99

This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$31.49

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$132.99

ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Durable to help transfer high voltage pulses without damage
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$97.75

Ignition Wire Set

from

$83.99

CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$10.29

NGK Spark Plugs, Inc. is the largest OE supplier and manufacturer of spark plugs for domestic and import vehicles in North America. Its OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist. With over 80 years of automotive expertise NGK has built a reputation for quality and reliability; manufacturing spark plugs for virtually every automotive, motorcycle, marine and small engine application. We are committed to be the premier partner with our customers, while maintaining original equipment standards for the highest durability and operational performance. With state-of-the-art manufacturing, inventory and distribution facilities in North America and across the globe, NGK is dedicated to providing customers with world-class products and services.

Product Features:

NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Actual OE or equivalent replacement spark plug.
Laser Iridium plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications.
Iridium tipped center electrode provides durability six times harder than platinum. NGK├óΓ┐¼Γ┐ós high-grade pure alumina ceramic and 98% pure copper core prevents the spark plug from overheating while providing reliable starts.
Unmatched Quality and Reliability: With over 80 years of automotive expertise, NGK has built a reputation for manufacturing spark plugs that deliver superior performance and longevity.
Tapered Seat Type: Designed with a tapered seat type, these spark plugs provide a secure fit and enhanced combustion efficiency, contributing to better engine performance.
Extensive Application Coverage: NGK manufactures spark plugs for virtually every automotive, motorcycle, marine, and small engine application, making it a versatile choice for various vehicles.
State-of-the-Art Manufacturing: NGK’s commitment to quality is reinforced by its state-of-the-art manufacturing, inventory, and distribution facilities in North America and across the globe, ensuring world-class products and services.

from

$14.99

NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:

HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
Specialized OEM Tip Designs: Features DFE and PSPE tip designs for enhanced ignitability and efficiency.
Industry-Leading Durability: Ruthenium center electrode ensures long-lasting performance and reliability.

from

$4.79

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Platinum spark plugs provide a center wire platinum firing tip which provides reduced gap erosion, fewer misfires, better performance and increased durability. Consider upgrading to Autolite Double Platinum or Iridium XP spark plugs for increased performance.

Product Features:

High nickel alloy side electrode maintains precise gap
Full platinum tip assures virtually no gap erosion for long life
Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)

from

$2.99

Dependable Performance, OE Replacement, RS12YC. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. The Copper Plus design ensures dependable performance and durability, while the copper core center electrode allows for accurate control of heat range, extending the spark plug’s life. Built to ISO and SAE standards, it offers superior corrosion resistance and proven performance. The nickel center electrode tip and tapered seat type further enhance its reliability, making it an excellent choice for maintaining your engine’s efficiency.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance
Enhanced Conductivity and Heat Control: The Champion Copper Plus Spark Plug features a copper core electrode that provides increased conductivity and heat control, ensuring good overall wear and extending the spark plug’s life.
Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and a tapered seat type, this spark plug enhances reliability and ensures optimal engine performance.

from

$5.49

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

PREMIUM GRADE SILICONE: Designed to withstand harsh environments
OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression

from

$78.99

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$11.36

Prenco Coil on Plug Boots provide the best protection possible for your ignition system versus the harsh environment created by the modem day engine. Prenco Coil on Plug Boots are constructed using the finest quality materials and compounds, and produced with superior quality tooling that exactly matches the Original Equipment Boot.

Product Features:

Prenco Coil on Plug Boots are produced using precise computer designed tooling and premium quality materials/compounds that are formulated to perform in extreme temperatures.
Prenco Coil on Plug Boots are designed as a direct replacement for the OE Boot. Springs, grommets and ferrite resistors are provided for all applications where applicable.
Inspect and replace Coil on Plug Boots every 50,000 miles and/or with every spark plug change to ensure optimum engine efficiency and performance.
Replacing Coil and Plug Boots at regular intervals will prevent/correct misfires and will help to minimize further costly damage to Ignition Coils, Sensors, Catalytic Convertors, and ECUs.

from

$75.99

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$285.61

Ignition Lock Housin

from

$104.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$200.41

Ignition Lock Housin

from

$45.99

BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Motorcycle Wire Set
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
External core made from oriented silicon steel ensures durability and longevity
Stainless steel spring resists corrosion
Tin-plated brass terminals improve electrical contact and protect against corrosion
High-dielectric epoxy injected into case and pulled into vacuum to eliminate air pockets and prevent moisture intrusion or thermal breakdown

from

$167.99

Product Features:

For proper installation, locate your nearest GM dealer, independent service center, or body shop
Precise fit for ease of installation

from

$55.99

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$73.99

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$85.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$81.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

2007 Hummer H3 Ignition and Tune-Up Products

More 2007 Hummer H3 Ignition and Tune-Up Products Categories

Essential 2007 Hummer H3 Ignition and Tune-Up Products

DENSO – Coil On Plug Boots-5 (Part No.671-5011)

ACDelco – GM Original Equipment Ignition Knock (Detonation) Sensor (Part No.F6020205037ACD)

Delphi – Knock Sensor (Part No.AS10261)

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0300)

Carquest Premium – Ignition Coil Connector (Part No.PTA1335)

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1125)

Dorman – Ignition Coil Connector (Part No.645-940)

DENSO – Coil On Plug Boots-5 (Part No.671-5008)

ACDelco – Spark Plug Wire Set (Part No.748UU)

Delphi – Ignition Wire Set (Part No.F10203329509DEL)

Carquest Premium – Spark Plug Wire Set (Part No.35-8346)

NGK – Laser Iridium Spark Plug – Superior Performance & Longevity (Part No.3474)

NGK – Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, TR5AHX (Part No.94567)

Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP5245)

Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RS12YC (Part No.401)

NGK – Coil on Plug Boot (Part No.58981)

NGK – NGK Wire Set (Part No.51436)

Prenco – Prenco Direct Ignition Coil Boot (Part No.F3006183094PRN)

NGK – NGK Wire Set (Part No.51440)

ACDelco – Ignition Lock Housin (Part No.M5025577508ACD)

Carquest Premium – Ignition Switch (Part No.CSC1218)

ACDelco – Ignition Lock Housin (Part No.M5025485235ACD)

Carquest – Ignition Coil (Part No.E997)

GM Genuine Parts – Ignition Coil (Part No.19300921)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1053)

Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1006)

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48933)

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1344)

Popular 2007 Hummer H3 Ignition and Tune-Up Products Categories

2007 Hummer H3 Ignition and Tune-Up Products

Top-Rated Ignition and Tune-Up Products Brands For Your 2007 Hummer H3

Popular Carquest Premium Ignition and Tune-Up Products

Top-Rated Autolite Iridium Ignition and Tune-Up Products

FAQs for 2007 Hummer H3 Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2007 Hummer H3?

What are the top-rated 2007 Hummer H3 Ignition and Tune-Up Products?