2007 GMC Yukon XL 2500 Drive Shafts and Axles

Essential 2007 GMC Yukon XL 2500 Drive Shafts and Axles

Driveworks – Clutch Release Bearing (Part No.S-B-2610)

Clutch Release Bearing

from

$15.99
Product Features:
  • Brand may vary by location
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6064)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$121.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 88-12; GMC 96-12;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1988-2012
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.60 INCH / 66 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • WITH PLATE
  • WITH STUDS
  • STYLE: ROUND FRAME
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Axle Bearing & Seal Kit For GM 9.25" IFS Front (Part No.10037)

Axle Bearing & Seal Kit For GM 9.25" IFS Front

from

$197.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Left, Right, and intermediate axle bearings and seals for 9.25″ GM IFS. This axle bearing & seal kit services one side only.

Product Features:
  • Fits GM 9.25″ IFS
  • Includes intermediate bearing, axle bearings and seals
See More

Yukon Gear – Adapter Sleeve Fro GM 11.5" & 10.5" 14 Bolt Truck Yokes To Use Triple Lip Pinion Seal (Part No.41209)

Adapter Sleeve Fro GM 11.5" & 10.5" 14 Bolt Truck Yokes To Use Triple Lip Pinion Seal

from

$29.99
Product Features:
  • Adapter sleeve
  • Fits GM 10.5″ 14 bolt truck and GM 11.5″
  • Converts to triple lip seal
See More

Yukon Gear – 9.5" GM C/Clip (Part No.33081)

9.5" GM C/Clip

from

$10.99
9.5″ GM C/clip.

Product Features:
  • c-clip for GM 9.5″
See More

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Yukon Gear – AxleHubBolt (Part No.33583)

AxleHubBolt

from

$5.99
AxleHubBolt

Yukon Gear – 1541H Alloy Front Left Hand Short Side Stub Axle For GM 9.25" IFS (’88-Newer) See Notes (Part No.21590)

1541H Alloy Front Left Hand Short Side Stub Axle For GM 9.25" IFS ('88-Newer) See Notes

from

$279.99
Yukon front lefft hand short side stub axle for GM 9.25″ IFS (’88 and newer). Yukon front axles come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1988 and up GM 9.25″ IFS
  • Left hand side
  • 33 spline
See More

NTN – Wheel Bearing (Part No.K8000345509NTN)

Wheel Bearing

from

$87.01
Wheel Bearing

Cardone – Front Drive Shaft: Greasable, Direct Replacement (Part No.65-9518)

Front Drive Shaft: Greasable, Direct Replacement

from

$367.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

National – Multi Purpose Bearing (Part No.HB-108-D)

Multi Purpose Bearing

from

$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Long Shaft Inner Clip For 9.25" GM IFS (Part No.33371)

Long Shaft Inner Clip For 9.25" GM IFS

from

$28.99
Long shaft inner clip for 9.25″ GM IFS.

Product Features:
  • Stub axle snap ring
  • Fits GM 9.25″ IFS
See More

National – Axle Shaft Seal (Part No.710926)

Axle Shaft Seal

from

$89.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Pro-King – Differential Axle Seal (Part No.743B074)

Differential Axle Seal

from

$6.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Thrust Washer For GM 9.25" IFS Stub Shaft (Part No.33525)

Thrust Washer For GM 9.25" IFS Stub Shaft

from

$44.99
Product Features:
  • Stub shaft thrust washer
  • Fits GM 9.25″ IFS
See More

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Axle Shaft Lock Assortment

from

$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10241XD)

CV Axle Shaft Assembly

from

$221.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10241)

CV Axle Shaft Assembly

from

$134.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.M802011)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)

Drive Axle Shaft Flange Gasket

from

$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

2007 GMC Yukon XL 2500 Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 2007 GMC Yukon XL 2500. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 43 different Drive Shafts and Axles in our inventory ranging from $4.79 to $973.99. That means you can find the exact parts or products you need to keep that 2007 GMC Yukon XL 2500 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 2007 GMC Yukon XL 2500. Carquest Premium, Felpro, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 2007 GMC Yukon XL 2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 238 reviews in this category, some of the top rated parts include Center Support Bearing Motor Mount: Center, 1 Piece with 4.4 stars and Center Support Bearing Motor Mount: Center, 1 Piece with 3.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2007 GMC Yukon XL 2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 2007 GMC Yukon XL 2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2007 GMC Yukon XL 2500 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Yukon XL 2500 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular National Drive Shafts and Axles

We carry National parts in our stock across Drive Shaft Bearings and Axle Shaft Seals categories, plus more. For a 2007 GMC Yukon XL 2500, our most popular National Drive Shafts and Axles include:
Bearings
from $14.79
(3)
Bearings
Drive Shaft Bearings
Multi Purpose Seal
from $11.99
(3)
Multi Purpose Seal
Axle Shaft Seals
Wheel Bearing: Direct Fit, 1 Piece
from $52.99
(20)
Wheel Bearing: Direct Fit, 1 Piece
Axle Shaft Bearings

Top 2007 GMC Yukon XL 2500 Drive Shafts and Axles from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Drive Shafts and Axles for your 2007 GMC Yukon XL 2500. Popular Carquest Premium parts include:
CV Axle Shaft Assembly
from $134.99
(49)
CV Axle Shaft Assembly
Drive Shaft and Axles

FAQs for 2007 GMC Yukon XL 2500 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 2007 GMC Yukon XL 2500?

Out of 43 Drive Shafts and Axles for the 2007 GMC Yukon XL 2500, the most popular in our inventory are:
Drive Axle Shaft Flange Gasket
from $4.79
(11)
Drive Axle Shaft Flange Gasket
Axle Flange Gaskets
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings

What are the top-rated 2007 GMC Yukon XL 2500 Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 2007 GMC Yukon XL 2500 based on customer reviews/ratings are:
Center Support Bearing Motor Mount: Center, 1 Piece
from $121.99
(7)
Center Support Bearing Motor Mount: Center, 1 Piece
“This is an exact fit product. I purchased another carrier bearing at one of the competitors and it wasn’t an exact fit and my driveshaft wobbled like”
Center Support Bearing Motor Mount: Center, 1 Piece
from $92.99
(5)
Center Support Bearing Motor Mount: Center, 1 Piece
“not as beefy as the OEM but fit correctly and works as designed”
Axle Shaft Lock Assortment
from $6.49
(3)
Axle Shaft Lock Assortment
“Lucky for me they had it in stock. Parts man was excellent”