2007 Ford Ranger Exhaust System Kits

DynoMax® Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up

Product Features:

• Stainless steel construction for lifelong protection
• Polished finish for a show quality shine
• Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
• Straight through design ensures unrestricted exhaust flow and reduces back pressure
• CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-2540 2.5″ Stainless Steel Exhaust System 98-11 Ranger Regular Cab Short Bed
• Large diameter stainless steel mandrel-bent tube

DynoMax® Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up

Product Features:

• Stainless steel construction for lifelong protection
• Polished finish for a show quality shine
• Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
• Straight through design ensures unrestricted exhaust flow and reduces back pressure
• CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone

The BORLA(R) Cat-Back Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade 304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Easy Bolt-On Installation
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds
• Custom designed for each application
• Patented straight-through muffler design reduces backpressure while absorbing sound waves
• Mandrel-bent stainless steel tubes with diameters optimized for reduced restriction while maintaining exhaust gas speed
• Made from the finest austenitic stainless steel for long-lasting durability
• All welded construction
• Proudly made in the USA

MBRPs Pro Series is the best performance exhaust system that money can buy. It is a series designed and built for the serious enthusiast who will settle for nothing less. Constructed from T304 stainless steel it delivers you optimal durability that keeps on looking its best. Easy to clean and maintain this is the product of choice for owners of lifted vehicles, show trucks or who operate in severe environments.

Product Features:

• Made With Mandrel Bent 3 Inch Tubing Up To Over The Axel
• Direct Bolt On 3.5 Inch Single Wall With Rolled End Exhaust Tips
• Limited Lifetime Warranty

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15773 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15773 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15773 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

aFe POWER Apollo GT Series exhaust was designed with unique, aggressive look in mind. Constructed from mandrel-bent stainless steel tubing, this system provides maximum flow and an impressive sound that will quickly turns heads. This performance exhaust system includes all necessary hardware and clamps for a hassle-free install, with no cutting required, making it a true bolt on system.

Product Features:

• Constructed from Stainless Steel Tubing for Strength and Durability
• Utilizes OE-style Bayonet Hangers for a Secure Fit
• Mandrel-Bent Tubing for Smooth Transitions and Increased Power
• Stainless Clamps for Improved Sealing Surface

The MagnaFlow 2019-2023 Ford Ranger Street Series Cat-Back Performance Exhaust System 19452 brings out the personality of your 2.3L 2019-2023 Ford Ranger with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford Ranger exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Ranger’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19452 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19452 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-2542 2.5″ Stainless Steel Exhaust System 98-11 Ranger Super Cab Short Beb
• Large diameter stainless steel mandrel-bent tube

The MagnaFlow 2019-2023 Ford Ranger Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.3L 2019-2023 Ford Ranger with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford Ranger exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Ranger’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19451 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19451 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

aFe POWER Apollo GT Series exhaust was designed with unique, aggressive look in mind. Constructed from mandrel-bent stainless steel tubing, this system provides maximum flow and an impressive sound that will quickly turns heads. This performance exhaust system includes all necessary hardware and clamps for a hassle-free install, with no cutting required, making it a true bolt on system.

Product Features:

• Constructed from Stainless Steel Tubing for Strength and Durability
• Utilizes OE-style Bayonet Hangers for a Secure Fit
• Mandrel-Bent Tubing for Smooth Transitions and Increased Power
• Stainless Clamps for Improved Sealing Surface

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• Installation Is a Snap
• Free-Flow Muffler
• Aggressive Sound

DynoMax® Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglas

Product Features:

• Large internal flow tubes improve exhaust flow and reduce backpressure
• Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
• Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
• Dyno proven to flow up to 700 SCFM

The MagnaFlow Off-Road Pro Series Cat-Back Performance Exhaust System 17114 17114 brings additional off-roading prowess and our deep signature exhaust note to your Truck with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17114 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Truck exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17114’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17114 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:

• KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
• CONSISTENT PERFORMANCE — Spring designed with the right compression strength for a secure connection
• PREMIUM MATERIALS — Made from high-quality materials for durability and long life
• THE RIGHT CONNECTION — Designed to be used for ball and socket joint
• BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Designed and manufactured to meet the needs of the exhaust system repair environment.
• Verified, tested and certified proprietary Organic coating resists corrosion.
• Tightly controlled coefficient of friction ensures reliable installation.
• Application specific kit contents
• Self-locking nuts (where applicable).