2007 Ford Mustang Performance and Racing Products

Find Your Specific 2007 Ford Mustang Performance and Racing Products

Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 2007 Mustang. Advance Auto Parts has popular Mustang parts like Performance Steering Products, Performance Ignition Products, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Mustang model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2007 Ford Mustang Performance and Racing Products below and start saving instantly.

Popular 2007 Ford Mustang Performance and Racing Products Categories

Computer Chip Programmers
Computer Chip Programmers
Performance Coils
Performance Coils
Performance Air Intake Kits
Performance Air Intake Kits
Performance Exhaust Mufflers
Performance Exhaust Mufflers
Performance Computer Prom and Chips
Performance Computer Prom and Chips
Engine Cold Air Intakes
Engine Cold Air Intakes
Performance Exhaust System Kits
Performance Exhaust System Kits
Performance Flywheel and Flexplates
Performance Flywheel and Flexplates
Performance Posi Units and Components
Performance Posi Units and Components
Performance Ignition Kits
Performance Ignition Kits
Performance Upper Performance Control Arm Bushings
Performance Upper Performance Control Arm Bushings
Performance Ring and Pinions
Performance Ring and Pinions

Essential Performance and Racing Products for 2007 Ford Mustangs

Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)

50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics

from

$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.

Product Features:
  • HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
  • MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
  • CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
  • Reads and Erases Diagnostic Trouble Codes
  • Display Over 15 Vehicle Parameters
  • Installation Is Easy-10-20 Minutes
  • Free Internet Updates And Upgrades
  • 30 Day Money Back Guarantee
See More

(9 reviews)
View Product

B & M – Flexplate, Small Block Ford 28.2 Ounce 157 Tooth (Part No.50236)

Flexplate, Small Block Ford 28.2 Ounce 157 Tooth

from

$153.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for Ford, Lincoln and Mercury (externally balanced) 289 and 302ci V8 engines with 28.2 ounce imbalance. Features include high tensile strength steel to resist elongation and cracking, 10.50 inch bolt pattern and 157 tooth ring gear. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M flexplates are ideal for hot rods, street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with C4 and C6 automatic transmissions.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More
View Product

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15638)

Street Series Cat-Back Performance Exhaust System

from

$863.99
The MagnaFlow 1994-1998 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.0L 1994-1998 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15638 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15638 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More
View Product

Energy Suspension – Control Arm Bushing Set (Part No.4.3129G)

Control Arm Bushing Set

from

$59.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More
View Product

Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42543)

40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound

from

$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

(13 reviews)
View Product

K&N – Cold Air Intake: Adds Up To 19 Horsepower, With Million Mile Air Filter (Part No.69-3535TP)

Cold Air Intake: Adds Up To 19 Horsepower, With Million Mile Air Filter

from

$399.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

(1 reviews)
View Product

Powertrax – Lock Right Locker (Part No.1822-LR)

Lock Right Locker

from

$371.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
    • See More
    View Product

    K&N – Cold Air Intake: Adds Up To 20 Horsepower, With Million Mile Air Filter (Part No.63-2578)

    Cold Air Intake: Adds Up To 20 Horsepower, With Million Mile Air Filter

    from

    $399.99
    K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

    Product Features:
    • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
    • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
    • IMPROVED ENGINE SOUND: Hear the power under the hood.
    • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
    • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
    • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
    • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
    • HIGH QUALITY: Made in America.
    See More

    (5 reviews)
    View Product

    Richmond Gear – RngPnn (Part No.F9355)

    RngPnn

    from

    $185.99
    RngPnn
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5174R)

    Sway Bar Bushing Set

    from

    $30.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Mr. Gasket – OilFillerCapCvr (Part No.6713G)

    OilFillerCapCvr

    from

    $64.99
    OilFillerCapCvr
    View Product

    Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

    Mallory Kit: Unil Conv: Delco: V8

    from

    $134.99
    Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

    Product Features:
    • Easy Installation
    • Improved Fuel Economy
    • Reduced Maintenance
    • Accurate Timing
    • Improved Performance
    • Provides A Simple Conversion
    • No Moving Parts To Wear Out
    See More

    (1 reviews)
    View Product

    Accel – Module:Eliminator Replacement (Part No.2005)

    Module:Eliminator Replacement

    from

    $91.99
    Put an end to high maintenance point ignition systems by utilizing a specialized electronic circuitry and an infrared signal. Stabilizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.

    Product Features:
    • Most Accurate Ignition Timing System
    • Improves Performance And Fuel Economy
    • Easy To Install With Simple Hand Tools
    • Reduced Maintenance
    • Eliminates Changing Points
    See More
    View Product

    Edelbrock – Performer Ford EFI Nitrous Systems for 1986-95 Mustang 5.0L/1996-98 4.6L (80 Hp) (Part No.70400)

    Performer Ford EFI Nitrous Systems for 1986-95 Mustang 5.0L/1996-98 4.6L (80 Hp)

    from

    $882.99
    Available in different sizes for many different vehicle models/years. Designed for EFI models. Power increases from 50-150 HP. Supplies nitrous directly into the intake system. Not for sale or use on pollution-controlled motor vehicles. In the early days of the automotive performance industry, you either ran what was available or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

    Product Features:
    • Designed for EFI Fords
    • 80 HP power increase
    • Supplies Nitrous Directly Into The Intake Stream
    See More
    View Product

    NOS/Nitrous Oxide Systems – Ford EFI; Nitrous System (Part No.05115NOS)

    Ford EFI; Nitrous System

    from

    $989.99
    You know how a dual stage system can let you leave the line at moderate horsepower levels for maximum traction and then bring a second stage in for up to 150 extra HP on the big end. NOS now offers a kit to convert your Stage II kit into a two stage kit.

    Product Features:
    • Injects Nitrous To Intake Tract
    • Extra Fuel Sent By E.F.I.
    • Produce 75 Extra Horsepower
    • Excellent Mixture Atomization
    • Eliminates Pudding Fuel
    • 50-State Smog Legal
    See More
    View Product

    FAG US – CUP (Part No.LM48510)

    CUP

    from

    $7.69
    CUP
    View Product

    Energy Suspension – Track Bar Bushing Set (Part No.4.7129G)

    Track Bar Bushing Set

    from

    $33.99
    Product Features:
    • Made from HYPER-Flex Polyurethane
    See More
    View Product

    SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)

    Preloaded Performance Programmer for Increased Horsepower & Torque

    from

    $456.99
    The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

    Product Features:
    • Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
    • Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
    • Reads and clears DTC (Diagnostic Trouble Codes) with ease.
    • Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
    • Full color LCD display
    • High-speed data logging/monitoring
    • Dual analog inputs
    • Most popular vehicles supported
    • Installs quickly and easily
    • Easy restoration back to stock
    • User adjustable vehicle parameters
    • USB Interface cable included
    • Product might not be available in all states due to local laws.
    See More

    (1 reviews)
    View Product

    Bully Dog – Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (Part No.40417)

    Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device

    from

    $469.99
    This Bully Dog GT Platinum tuner is four products in one: a vehicle engine tuner, monitor, gauge, and diagnostic device.ÿ

    Product Features:
    • Dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy, and providing a comprehensive set of monitoring features and diagnostic functions.
    • Bully Dog GT Platinum tuners are incomparable to other tuning products because they have the largest feature set and the widest range of vehicle applications available.
    • Product might not be available in all states due to local laws.
    See More

    (1 reviews)
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5158R)

    Sway Bar Bushing Set

    from

    $22.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5191R)

    Sway Bar Bushing Set

    from

    $40.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5111G)

    Sway Bar Bushing Set

    from

    $18.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Edelbrock – Performer RPM Carb/Plate Nitrous Systems for 4500 Series Carbs (100-250 Hp) (Part No.70004)

    Performer RPM Carb/Plate Nitrous Systems for 4500 Series Carbs (100-250 Hp)

    from

    $1113.99
    Product Features:
    • Features 10 lbs. Bottle Capacity
    • For 4500 Series Carbs
    • Between 100-250 HP
    • 2-Stage Performer RPM
    • Includes All Necessary Installation Items
    See More
    View Product

    Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (200-400+ Hp) (Part No.70080)

    Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (200-400+ Hp)

    from

    $801.99


    Product Features:
    • Designed For Carbureted V8 Engines
    • Enhanced Flow Capacity
    • Softens The Hit Of The Nitrous System
    • Simple To Install
    See More
    View Product

    Edelbrock – Universal Performer Dry to Wet Nitrous Oxide System Conversion Kit (Part No.71883)

    Universal Performer Dry to Wet Nitrous Oxide System Conversion Kit

    from

    $226.99
    Product Features:
    • Dry To Wet Conversion System
    • Hose Included
    • Includes Fittings
    • Includes Solenoid
    • Includes All Necessary Installation Items
    See More
    View Product

    Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

    Super Stock Replacement Coil for Improved Performance, Starting, and Power

    from

    $42.49
    Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

    Product Features:
    • 42000 Volts
    • Effective To 6500 RPM
    • Quicker Starting
    • Improved Throttle Response
    • Higher RPM Power
    • Can Finished In Yellow
    See More

    (54 reviews)
    View Product

    Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

    Ford 1984-98 Eec-Iv Supercoil

    from

    $77.99
    Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

    Product Features:
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    (28 reviews)
    View Product

    MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)

    Coil; Street Fire; Ford TFI

    from

    $65.99
    These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

    Product Features:
    • Bolt-on Performance
    • Factory replacement coil
    See More

    (12 reviews)
    View Product

    Upgrade your 2007 Ford Mustang with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 2007 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 47 Performance and Racing Products for the 2007 Ford Mustang, designed to meet your needs without breaking the bank. From Performance Steering Product replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2007 Ford Mustang at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.69 to $926.99, with an average price of $269.65. Our 47 Performance and Racing Products in stock come from 19 trusted brands, so you’re sure to find the right part for your 2007 Ford Mustang without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Ford Mustang, we stock popular OEM and aftermarket Performance and Racing Products from top names like Flowmaster Inc., Accel, Bully Dog, and more. Flowmaster Inc. Performance and Racing Products start at just $99.99 and boast an impressive 4 stars average rating from customers. Accel and Bully Dog also bring quality to the table, with Performance and Racing Products available starting at $24.99, and at an average 4 stars rating. With 110 customer reviews and counting, our 2007 Ford Mustang Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 2007 Ford Mustang!

    Best-Selling Performance Steering Products for 2007 Ford Mustangs

    Enhance the driving experience in your Ford with 5 quality Performance Steering Product components, starting at $20.99.
    show more show less

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5191R)

    Sway Bar Bushing Set

    from

    $40.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5193R)

    Sway Bar Bushing Set

    from

    $20.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5191G)

    Sway Bar Bushing Set

    from

    $41.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Sway Bar Bushing Set (Part No.4.5193G)

    Sway Bar Bushing Set

    from

    $22.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More
    View Product

    Energy Suspension – Track Bar Bushing Set (Part No.4.7129G)

    Track Bar Bushing Set

    from

    $33.99
    Product Features:
    • Made from HYPER-Flex Polyurethane
    See More
    View Product

    Most Popular 2007 Ford Mustang Performance Ignition Products

    Customize your Ford with 2 Performance Ignition Products products like Performance Coils and Performance Ignition Kits, all priced under $176.99.
    show more show less

    Accel – Coil:Ford Mod Eng 3-Valve (Part No.140033)

    Coil:Ford Mod Eng 3-Valve

    from

    $24.99
    ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

    Product Features:
    • Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
    • Advanced Bobbin Technology
    • Direct Plug In Replacement results in a Direct OE Fit
    • OBD ll Safe, so you won’t be throwing codes, just sparks
    • Standard Motor Products SMP Fd-508
    • MSD 8243 82438
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    (10 reviews)
    View Product

    MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)

    Harness; Ford 4.6L Modular to DIS-4 Ignition

    from

    $176.99
    Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.

    Product Features:
    • Easily install two DIS-4 Ignitions on late model Ford Engines
    • Easy Connections w/No Splicing Or Cutting Into Factory Wiring
    • Wiring the system will take only an hour
    • Multiple direct plug in connectors
    • Wiring the system will only take and hour
    See More
    View Product

    Top Picks for 2007 Ford Mustang Performance Exhaust Products

    Upgrade Ford Mustangs with top-quality Performance Exhaust Products parts, including 7 OEM and aftermarket selections for your 2007 model.
    show more show less

    Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)

    Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $113.99
    Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    (1 reviews)
    View Product

    Dynomax – Dual – 2.5in Cat-Back Exhaust System – Ultra Flo Welded Mufflers: Stainless Steel (Part No.39434)

    Dual - 2.5in Cat-Back Exhaust System - Ultra Flo Welded Mufflers: Stainless Steel

    from

    $877.99
    Give your Ford Mustang’s exhaust system an upgrade with a DynoMax Ultra Flo welded 2.5-in. dual cat-back exhaust system. Features two DynoMax Ultra Flo welded mufflers that feature Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

    Product Features:
    • COMPATIBILITY — Designed for 2005-2009 Ford Mustang; see product information for compatibility and engine specs
    • COMPLETE SOLUTION — Includes two DynoMax Ultra Flo welded mufflers, pipes, X-pipe, brackets and clamps
    • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
    • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
    • IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
    • SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure
    • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
    • ENGINEERED TO LAST — Stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
    • ENGINEERED TO LAST — Stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
    • NOTES — Welded 3.5-in. outlet double wall, buffed and polished stainless-steel slant cut tips
    See More

    (1 reviews)
    View Product

    Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)

    40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $99.99
    The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    (3 reviews)
    View Product

    Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42543)

    40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $99.99
    The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    (13 reviews)
    View Product

    Dynomax – Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 3.5" Out, Oval (Part No.17572)

    Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 3.5" Out, Oval

    from

    $249.99
    DynoMax Ultra Flo¿ Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

    Product Features:
    • Stainless steel construction for lifelong protection
    • 100% welded design for maximum durability
    • Straight through design ensures unrestricted exhaust flow and reduces back pressure
    • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
    • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
    See More
    View Product

    Flowmaster Inc. – Axle-back System 409S – Dual Rear Exit – Outlaw – Aggressive Sound (Part No.817511)

    Axle-back System 409S - Dual Rear Exit - Outlaw - Aggressive Sound

    from

    $599.99
    Flowmaster’s Outlaw Axle-back systems are race-oriented systems designed to replace original rear mounted mufflers located behind the rear axle using factory style connections. Outlaw systems deliver an ultra aggressive interior and exterior tone and are suited to the enthusiast who wants the most aggressive components they can purchase. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

    Product Features:
    • Mandrel bent 16 gauge 409 stainless tubing
    • Aggressive and powerful exterior exhaust tone
    • Includes hangers and hardware for easy installation
    • Axle back system
    • Dyno tuned for maximum performance
    See More
    View Product

    Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942443)

    40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $143.99
    This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More
    View Product

    In-Demand Performance Oil Filters for 2007 Ford Mustangs

    Select from 1 premium Performance Oil Filters parts for your 2007 Ford Mustang.
    show more show less

    Mr. Gasket – OilFillerCapCvr (Part No.6713G)

    OilFillerCapCvr

    from

    $64.99
    OilFillerCapCvr
    View Product

    Most Sold 2007 Ford Mustang Performance Air Intake Kits

    Explore our best-selling Ford parts for the 2007 Mustang among 6 OEM and aftermarket options starting from $199.99.
    show more show less

    K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (Part No.69-3522TP)

    Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter

    from

    $399.99
    K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

    Product Features:
    • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
    • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
    • IMPROVED ENGINE SOUND: Hear the power under the hood.
    • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
    • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
    • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
    • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
    • HIGH QUALITY: Made in America.
    See More

    (3 reviews)
    View Product

    K&N – Cold Air Intake: Adds Up To 57 Horsepower, With Million Mile Air Filter (Part No.57-2571)

    Cold Air Intake: Adds Up To 57 Horsepower, With Million Mile Air Filter

    from

    $349.99
    K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

    Product Features:
    • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
    • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
    • IMPROVED ENGINE SOUND: Hear the power under the hood.
    • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
    • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
    • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
    • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
    • HIGH QUALITY: Made in America.
    See More

    (3 reviews)
    View Product

    K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.57-2566)

    Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter

    from

    $349.99
    K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

    Product Features:
    • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
    • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
    • IMPROVED ENGINE SOUND: Hear the power under the hood.
    • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
    • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
    • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
    • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
    • HIGH QUALITY: Made in America.
    See More

    (6 reviews)
    View Product

    Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9926)

    Cold Air Intake Kit Engineered to Add Horsepower & Torque

    from

    $199.99
    Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

    Product Features:
    • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
    • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
    • IMPROVED ENGINE SOUND: Hear the power under the hood
    • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
    • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
    • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
    • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
    • WILL NOT VOID VEHICLE WARRANTY
    • Product might not be available in all states due to local laws.
    See More
    View Product

    Edelbrock – Competition Air Intake Kit #15808 For 05-09 Mustang GT (Part No.15808)

    Competition Air Intake Kit #15808 For 05-09 Mustang GT

    from

    $643.99
    Edelbrock Part #15808 Edelbrock Competition Air Intake kit provides the increased airflow needed for 2005-09 Mustang GT racing applications. It includes a high flow Mass airflow Sensor, 7.85in. long reusable open element filter, plastic shroud and all nec

    Product Features:
    • Red Filter Color
    • Cotton Gauze Filter Material
    • Cone Filter Shape
    • 7.85 Overall Length
    • 95mm Housing Diameter
    See More
    View Product

    aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 13 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-11312)

    Magnum FORCE Cold Air Intake: Gain up to 13 Horsepower! Dry Air Filter For Easy Maintenance

    from

    $428.99
    Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

    Product Features:
    • Uses Pro DRY S Air Filter For Maximum Convenience
    • Rotomolded Plastic Tube For Maximum Air Flow
    • 91% cfm Flow Gain
    • Improved Throttle Response
    See More
    View Product

    Top-Rated Performance and Racing Products Brands For Your 2007 Ford Mustang

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 2007 Ford Mustangs. Below you’ll find some of our best rated Performance and Racing Products from Flowmaster Inc., Accel, and Bully Dog, and more. Performance and Racing Products from these brands that fit a 2007 Mustang start at just $24.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Flowmaster Inc. 2007 Ford Mustang Performance and Racing Products

    When it comes to maintaining or upgrading your 2007 Ford Mustang, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Flowmaster Inc. ticks all of those boxes. We offer a wide selection of Flowmaster Inc. Performance and Racing Products, specifically designed for the 2007 Ford Mustang. With over 5 Flowmaster Inc. brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $99.99, with an average price of just $211.59. Plus, with over 17 customer reviews and an average rating of 4 stars, you can trust that our Flowmaster Inc. Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
    from
    $143.99
    This product is not rated

    40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    “”

    Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
    from
    $113.99

    (1)

    Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    “sounds great just what I WAS LOOKING FOR.”

    Axle-back System 409S - Dual Rear Exit - Outlaw - Aggressive Sound
    from
    $599.99
    This product is not rated

    Axle-back System 409S – Dual Rear Exit – Outlaw – Aggressive Sound

    “”

    Popular Accel 2007 Ford Mustang Performance and Racing Products

    Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2007 Ford Mustang owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 2007 Mustang, Advance Auto Parts carries a full inventory of 1 Accel Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Accel Performance and Racing Products range up to $24.99, plus, with more than 10 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Coil:Ford Mod Eng 3-Valve
    from
    $24.99

    (10)

    Coil:Ford Mod Eng 3-Valve

    “Had replaced one , then another at $100. each time. So my husband and I decided to replace them all and what a difference. Drives better than since ”

    FAQs for 2007 Ford Mustang Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 2007 Ford Mustangs?

    Out of 47 Performance and Racing Products that fit 2007 Ford Mustangs, the following parts are the top sellers:

    What’s the price range for 2007 Ford Mustang Performance and Racing Products?

    Performance and Racing Product prices for the 2007 Ford Mustang start at $7.69 and go up to $926.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 2007 Ford Mustang?

    The average price for Performance and Racing Products for the 2007 Ford Mustang is $269.65. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Ford Mustang model years?

    Yes, we currently carry Performance and Racing Products for 56 model years of Ford Mustangs between 1964 and 2025. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

    What are the cheapest Performance and Racing Products for my 2007 Ford Mustang?

    The cheapest 2007 Ford Mustang Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 2007 Ford Mustang?

    Out of 110 reviews by customers, our 2007 Ford Mustang Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2007 Ford Mustang and their top-rated products:

    What types of Performance and Racing Products do you sell for my 2007 Ford Mustang?

    Can I get help with 2007 Ford Mustang Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

    What is your return policy for Ford Mustang Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Ford Mustang Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

    More Popular Parts for All Makes