2007 Ford F-150 Ignition Coils and Boots
More 2007 Ford F-150 Ignition Coils and Boots
Find your specific 2007 Ford F-150 original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2007 Ford F-150 Ignition Coils and Boots
DENSO – Coil On Plug Boots-8 (Part No.671-8164)
from
$63.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
DENSO – Coil On Plug Boots-6 (Part No.671-6291)
from
$191.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
DENSO – Coil On Plug Boots-8 (Part No.671-8110)
from
$62.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
DENSO – Coil On Plug Boots-8 (Part No.671-8172)
from
$97.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
DENSO – Coil On Plug Boots-8 (Part No.671-8182)
from
$87.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
E3 – Ultra-High Output Coyote Coil (Part No.E3.619)
from
$44.99
Whether youve got a brand new Mustang GT or are dropping a Coyote crate motor into a classic 32 Lil Deuce Coupe, you need E3s ultra-high output Coyote Coil. With more than double the energy output of a stock coil, E3s Coyote coil features a stainless steel spark plug contact ring with a ferrite lug to suppress EMI/RFI noise and optimized resistance and inductance values which increase output at higher RPM levels. Our high temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring extra-long life. Additionally, the spark plug boots are molded in a special high temperature 550 degree F silicone compound.Ideally suited for a wide range of both naturally aspirated and forced induction racing applications, E3.619 fits 2011 to current model year 5.0L Coyote engines. When coupled with an E3 Spark Plug featuring DiamondFIRE Technology, youll experience tire shredding power at its finest.
Product Features:
See More
Product Features:
- Double the energy output of a stock coil
- High temperature expoxy provides excellent thermal conductivity and long life
- Stainless steel spark plug contact ring and optimized resistance and inductance provide high output at higher RPM levels
- Fits 5.0L 2011-2016 Current Coyote engines
- Crosses to MSD 8248
E3 – High Output Ford 2-Valve Coil (Part No.E3.624)
from
$29.99
With more than double the energy output of a stock coil, E3s new 2 Valve coil features a stainless steel spark plug contact ring with a ferrite lug to suppress EMI/ RFI noise. Designed to work with the factory DIS electronic controls as well as high performance aftermarket ignition systems, the resistance and inductance values have been optimized to increase output at high RPM levels. Our high temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring extra long life. Additionally, the spark plug boots are molded in a special high temperature 550 degree F silicone compound. Fits the 1997 to 2013 2 Valve Ford engines.
Product Features:
See More
Product Features:
- Designed to work with factory DIS electronic ignition systems
- High temperature epoxy provides excellent thermal conductivity and long life
- Stainless steel spark plug contact ring and optimized resistance and inductance provide high output at higher RPM levels
- Fits 1997-2013 2-Valve Ford engines
- Crosses to MSD 8248
NGK – NGK Wire Set (Part No.52071)
from
$89.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
NGK – Coil on Plug Boot (Part No.58978)
from
$6.29
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
Accel – Custom Fit Super Stock Spark Plug Wire Set, 8mm Super Stock Graphite Core (Part No.4056)
from
$61.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with blue, black, red and yellow wire, zinc-plated steel terminals. Tinned copper core.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8100)
from
$129.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-001FMP)
from
$49.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Motorcraft – Direct Ignition Coil Boot (Part No.F3006429405MTR)
from
$13.75
The Motorcraft Direct Ignition Coil Boot is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- OES replacement part for your vehicle’s original factory component
- Offering the quality, reliability, and durability of OES
- Manufactured to OES specification for fit, form, and function
Dorman – Help – Spark Plug Boot With Coil Wire Kit (Part No.49812)
from
$6.99
Spark plug coil boot deteriorated or damaged? This replacement boot matches the fit and function of the original part on specified years, make and models. This boot is made from quality materials to resist damage from heat and oil saturation.
Product Features:
See More
Product Features:
- Ideal replacement – this spark plug coil boot directly replaces the boot on specified vehicle years, makes and models
- Durable construction – this spark plug coil boot is made from a tough rubber material that is resistant to damage from exposure to heat and oil saturation
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Motorcraft – Spark Plug Conn. Boo (Part No.F10111062134MTR)
from
$14.54
Spark Plug Conn. Boo
NGK – Coil on Plug Boot (Part No.58901)
from
$6.79
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
JBA Performance – W06729 Ignition Wires Ford 97-00 4.2L Blue (Part No.W06729)
from
$92.99
JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.
Product Features:
See More
Product Features:
- JBA Performance Exhaust W06729 Ignition Wires Ford 97-00 4.2L Blue
- Extra thick diameters for improved under hood appearance
Motorcraft – Direct Ignition Coil – (Coil on Plug) (Part No.F3005424963MTR)
from
$107.97
Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
- Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
- Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
- Radio-Frequency Interference (RFI) Suppression
- Magnets hold strength for the coil to maintain proper energy output
- Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
- Coil Housing is engineered to withstand extremes in temperature without cracking
WSO – Direct Ignition Coil – (Coil on Plug) (Part No.F3005387615WSO)
from
$26.67
Every WSO ignition coil is developed and designed for its specific application, and engineered for maximum performance. WORLD SOURCEONE ignition coils are designed to operate reliably and dependably under all operating conditions and engine rpm ranges, providing the highest engine performance, low exhaust emissions, and fuel economy objectives. WSO Direct Ignition Coils are designed to adapt the required energy output to match engine-operating conditions and deliver the optimum energy level needed to ignite a diluted stratified charge.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Superior, reliable performance compared to competitive products
- Lower cost alternative to original equipment
- No additional time consuming steps needed for installation
- Factory original equipment connectors
- Improved coil efficiency reduces the need to generate excessive high voltage
- Designed to provide durability and performance
- Noise abatement technology to eliminate audible coil noise
- Lower primary inductance provides high-speed performance
- Maximum available voltage under all operating conditions
- TS 16949 Certification
Delphi – Ignition Coil (Part No.GN10420)
from
$101.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Accel – Super Coil (Part No.140032)
from
$39.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resist
Product Features:
See More
Product Features:
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- OBD II Compatible Safe
- Standard Motor Products SMP Fd-503
- MSD 8242 82428
- Resists Shock And Vibration
- Resists Corrosion
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBE1348)
from
$86.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Accel – Super Coil (Part No.140012)
from
$85.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct plug replacements for OEM coils. They feature bodies and, or secondary towers molded in ACCEL yellow and feature brass secondary contacts (except direct fire coil on plug applications).
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Fd-478
- MSD 5527
- Resists Shock And Vibration
- Resists Corrosion
Motorcraft – Direct Ignition Coil – (Coil on Plug) (Part No.F3005419828MTR)
from
$87.96
Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
- Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
- Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
- Radio-Frequency Interference (RFI) Suppression
- Magnets hold strength for the coil to maintain proper energy output
- Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
- Coil Housing is engineered to withstand extremes in temperature without cracking
Autopart International Inc – Ignition Coil (Part No.F30002470018API)
from
$34.87
Ignition Coil
Motorcraft – Motorcraft Central Ignition Coil (Part No.F3000343175MTR)
from
$144.72
Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
- Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
- Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
- Radio-Frequency Interference (RFI) Suppression
- Magnets hold strength for the coil to maintain proper energy output
- Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
- Coil Housing is engineered to withstand extremes in temperature without cracking
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-6304)
from
$101.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1001)
from
$55.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Popular 2007 Ford F-150 Ignition Coils and Boots Categories
2007 Ford F-150 Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 2007 Ford F-150. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 49 different Ignition Coils and Boots in our inventory ranging from $6.79 to $368.99. That means you can find the exact parts or products you need to keep that 2007 Ford F-150 running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 2007 Ford F-150. Motorcraft, Carquest Premium, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 2007 Ford F-150, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 3,275 reviews in this category, some of the top rated parts include Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece with 4.7 stars and Super Coil with 4.4 stars.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 2007 Ford F-150 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 2007 Ford F-150 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2007 Ford F-150 demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your F-150 the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
Popular DENSO Ignition Coils and Boots
We carry DENSO parts in our stock across Ignition Coils categories, plus more. For a 2007 Ford F-150, our most popular DENSO Ignition Coils and Boots include:
Top 2007 Ford F-150 Ignition Coils and Boots from Driveworks
Driveworks products are another trusted brand when it comes to Ignition Coils and Boots for your 2007 Ford F-150. Popular Driveworks parts include:
FAQs for 2007 Ford F-150 Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 2007 Ford F-150?
Out of 49 Ignition Coils and Boots for the 2007 Ford F-150, the most popular in our inventory are:
from
$55.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
from
$8.49
This product is not rated
Coil On Plug Insulator Boot: Spring included, Designed for direct fit
Ignition Coil Boots
from
$76.99
(47)
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
What are the top-rated 2007 Ford F-150 Ignition Coils and Boots?
Top-rated Ignition Coils and Boots for your 2007 Ford F-150 based on customer reviews/ratings are:
from
$80.99
(118)
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
“Installation was easy. OEM Reliability.”
from
$39.99
(82)
Super Coil
“This is a direct replacement for the factory coil on plug ignition system, fits perfect. High quality part priced below the factory part. I wanted to ”
