2007 Ford Explorer Transmission Parts

Name: Wheel Bearing: Direct Fit, 1 Piece
Brand: Driveworks
SKU: S-5707
Price: 15.99 USD
Rating: 3.0 (19 reviews)

Below you will find various in-demand Ford Transmission Parts, components and accessories for your 2007 Explorer. Advance Auto Parts has popular Explorer parts like Automatic Transmission Parts, Transmission Seals, Transmission Bearings and more. You’ll also find aftermarket and OEM Transmission Parts for other Explorer model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2007 Ford Explorer Transmission Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2007 Ford Explorer Transmission Parts Categories

Transmission Torque Converters

OE Transmission Coolers

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Countershaft Bearings

Manual Transmission Output Shaft Bearings

Automatic Transmission Valve Body Sealing Sleeves

Transmission Pan Gaskets

Shift Interlock Solenoids

Transmission Oil Cooler Fittings

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Master Repair Kits

Back Up and Neutral Safety Switches

Transmission Oil Pan Gaskets

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Automatic Transmission Control Shaft Seals

Transmission Range Sensor Connectors

Automatic Transmission Oil Pump Seals

Pinion Seals

Transmission Seals and O-rings

Automatic Transmission Oil Cooler Assemblies

Back Up Light Switch Connectors

Torque Converter Seals

Extension Housing Seals

Back Up Lamp Connectors

Automatic Transmission Output Shaft Bearings

Shift Shaft Seals

Extension Housing Gaskets

Front Pump Seals

Remanufactured Automatic Transmissions

Automatic Transmission Repair Sleeve

Essential Transmission Parts for 2007 Ford Explorers

from

$15.99

Driveworks wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, Driveworks bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:

Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$29.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$8.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$155.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$25.99

This automatic transmission valve body sealing sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission valve body sealing sleeve is designed to match the fit and function of the original sleeve on specified vehicles
Restores functionality – reliable replacement for a missing part that has failed due to plastic cracks and O-ring leaks
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$19.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$7.49

AT CONTR SHAFT SEAL

from

$51.99

This transmission range sensor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this transmission range sensor connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$173.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Meets or exceeds OE specifications

from

$28.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$41.99

This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$43.49

Product Features:

Brand may vary by location

from

$65.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Neutral Safety Switch prevents the engine from starting unless the transmission is in neutral or park, enhancing safety by reducing the risk of accidental movement while starting the vehicle. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$26.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$26.49

AT EXT HOUSING GSKT

from

$16.49

Product Features:

Brand may vary by location

from

$42.99

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$19.99

Design type: spring loaded; single-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$25.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$22.99

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$67.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$34.99

AT OIL PAN GASKET

from

$7.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$64.99

This automatic transmission shifter cable matches the fit and function of the original equipment cable to ensure a trustworthy repair. Made of quality materials, it has been extensively tested to ensure a long service life.

Product Features:

Direct replacement – this automatic transmission shifter cable matches the fit and function of the original equipment part
Durable materials – this shifter cable is manufactured from quality materials for durability
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$85.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
33% more efficient than a comparable tube and fin design

Upgrade your 2007 Ford Explorer with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2007 Ford Explorer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Transmission Parts are key to keeping your Explorer functioning at its best. At Advance Auto Parts, we offer a wide selection of 82 Transmission Parts for the 2007 Ford Explorer, designed to meet your needs without breaking the bank. From Automatic Transmission Part replacements to Transmission Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2007 Ford Explorer at great prices. Our Transmission Parts inventory for this model ranges from just $4.99 to $2,867.99, with an average price of $239.05. Our 82 Transmission Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 2007 Ford Explorer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Ford Explorer, we stock popular OEM and aftermarket Transmission Parts from top names like Felpro, National, Imperial, and more. Felpro Transmission Parts start at just $29.99 and boast an impressive 4.6 stars average rating from customers. National and Imperial also bring quality to the table, with Transmission Parts available starting at $8.99, and at an average 4.3 stars rating. With 1,230 customer reviews and counting, our 2007 Ford Explorer Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Ford Explorer is always ready to roll. We’re committed to providing you with everything you need to keep your Explorer in top shape, all in one place. Start shopping confidently below for your 2007 Ford Explorer!

Best-Selling Automatic Transmission Parts for 2007 Ford Explorers

Enhance the driving experience in your Ford with 15 quality Automatic Transmission Part components, starting at $41.99.

show more show less

from

$41.99

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$309.99

Remanufactured to meet or exceed OE quality, with inherent OE flaws corrected to improve longevity and performance.

Product Features:

Meets or exceeds OE specifications
All blocks are serialized

from

$2867.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road; We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions; Each Moveras transmission is produced in a World Class manufacturing facility; Our entire process has been developed from scratch, utilizing LEAN manufacturing principles; Our transmissions are produced in a Clean Room environment; Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$2867.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$2696.00

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty(limited).

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2696.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2479.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2478.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2478.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2444.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2395.99

All transmissions are completely disassembled and cleaned. All cases are media-blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as necessary. All friction components are replaced with upgraded heavy-duty parts. Drum assemblies are air-checked and side play is measured to ensure proper clearance. All seals, O-rings, and gaskets are replaced. All solenoids are tested and replaced if they do not pass duty-cycle specifications. Internal wiring harnesses are inspected and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valves and valve bores are inspected, and bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.

Product Features:

Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$2366.99

Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$469.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$62.99

The FAG repair sleeve is a precision element that provides additional sealing for damaged shafts. Made of heat-treated stainless steel, the FAG repair sleeve signifcantly increases the life of the shaft and prevents premature wear. Since no shaft removal or machining is required during the repair, the repair sleeve is a cost effective repair solution to protect damaged surfaces.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$53.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

Most Popular 2007 Ford Explorer Transmission Seals

Customize your Ford with 15 Transmission Seals products like Pinion Seals, Transmission Seals and O-rings, and Extension Housing Seals, all priced under $43.49.

show more show less

from

$15.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$13.29

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$7.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$9.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$7.49

AT CONTR SHAFT SEAL

from

$7.29

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$25.99

Direct replacement – this automatic transmission valve body sealing sleeve is designed to match the fit and function of the original sleeve on specified vehicles
Restores functionality – reliable replacement for a missing part that has failed due to plastic cracks and O-ring leaks
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

Product Features:

Brand may vary by location

from

$4.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$19.29

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$43.49

Product Features:

Brand may vary by location

from

$19.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$17.49

Design type: springless; single-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$10.99

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, they’re covered by an unlimited mileage, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

Guaranteed Fitment
High Quality Materials
Replaces hardened or cracked original automatic transmission valve body sealing sleeve that can allow ATF leakage and can degrade transmission performance
OE-style o-ring profile and durometer ensures proper compression seal between sleeve and valve body
High-quality sleeve and o-ring materials resist intense transmission heat and corrosive ATF degradation

Top Picks for 2007 Ford Explorer Transmission Bearings

Upgrade Ford Explorers with top-quality Transmission Bearings parts, including 6 OEM and aftermarket selections for your 2007 model.

show more show less

from

$8.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$15.99

Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$21.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$23.79

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

In-Demand Transmission Cooler and Parts for 2007 Ford Explorers

Select from 16 premium Transmission Cooler and Parts parts for your 2007 Ford Explorer, with prices ranging from $11.99 to $146.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$85.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
33% more efficient than a comparable tube and fin design

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$79.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$74.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$146.99

This automatic transmission oil cooler is designed to match the function of an original cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion, or damage.

Product Features:

Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle
Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$136.99

New Platinum Pro Automatic Transmission Oil Cooler Assembly

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Most Sold 2007 Ford Explorer Transmission Mounts

Explore our best-selling Ford parts for the 2007 Explorer among 2 OEM and aftermarket options starting from $51.99.

show more show less

from

$51.99

Anchor 3062 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2002-2010
Weight approx: 2 Lbs

from

$57.99

Anchor 3483 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2006-2010
Weight approx: 4 Lbs

Top-Rated Transmission Parts Brands For Your 2007 Ford Explorer

Shop for the best-rated brands offering Transmission Parts and other products for your 2007 Ford Explorers. Below you’ll find some of our best rated Transmission Parts from Felpro, National, and Imperial, and more. Transmission Parts from these brands that fit a 2007 Explorer start at just $8.99 and are rated as high as 4.6 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 2007 Ford Explorer Transmission Parts

When it comes to maintaining or upgrading your 2007 Ford Explorer, using quality Transmission Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Transmission Parts, specifically designed for the 2007 Ford Explorer. With over 1 Felpro brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $29.99. Plus, with over 1 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $29.99

(1)

Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket

“I used this product as an OEM replacement for a 2000 Lincoln LS V8.”

Popular National 2007 Ford Explorer Transmission Parts

National auto parts is one of the highest quality Transmission Part brands in the market. Any 2007 Ford Explorer owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2007 Explorer, Advance Auto Parts carries a full inventory of 3 National Transmission Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these National Transmission Parts range from $8.99 to $15.99, plus, with more than 33 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $8.99

(4)

Bearing Race

“Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”

from $15.99

(1)

Multi-Purpose Seal

“Great”

from $13.29

(28)

Multi-Purpose Seal

“05 F150, 4.6L 4×4, 8.8 Rear End, Pinion Seal This was a high quality seal. It is easy to tap in because on the metal ring on the outside of the seal. ”

FAQs for 2007 Ford Explorer Transmission Parts

Which Transmission Parts are best-sellers for 2007 Ford Explorers?

Out of 82 Transmission Parts that fit 2007 Ford Explorers, the following parts are the top sellers:

Mounting Kit System (6014844) – $11.99
Multi-Purpose Seal (3268012) – $13.29
Wheel Bearing: Direct Fit, 1 Piece (5050138) – $15.99

What’s the price range for 2007 Ford Explorer Transmission Parts?

Transmission Part prices for the 2007 Ford Explorer start at $4.99 and go up to $2,867.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2007 Ford Explorer?

The average price for Transmission Parts for the 2007 Ford Explorer is $239.05. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Ford Explorer model years?

Yes, we currently carry Transmission Parts for 33 model years of Ford Explorers between 1991 and 2025. Transmission Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Transmission Parts for my 2007 Ford Explorer?

The cheapest 2007 Ford Explorer Transmission Parts we carry in stock are:

Oil Seal (11407832) – $4.99
Multi Purpose Seal (11077135) – $4.99
Multi-Purpose Seal (18444989) – $7.29
AT CONTR SHAFT SEAL (11240381) – $7.49
Oil Seal (5440211) – $7.99

What are the top-rated Transmission Parts that fit the 2007 Ford Explorer?

Out of 1,230 reviews by customers, our 2007 Ford Explorer Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2007 Ford Explorer and their top-rated products:

Transmission Connectors
- Transmission Cooler Line Quick Connector (OE Fix) (10929463) – $32.99
- Transmission Line Fitting Kit (15230011) – $41.99
Automatic Transmission Pan and Gaskets
- Transmission Cooler Line Quick Connector (OE Fix) (10929463) – $32.99
- Transmission Line Fitting Kit (15230011) – $41.99

What types of Transmission Parts do you sell for my 2007 Ford Explorer?

As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 2007 Ford Explorer:

Can I get help with 2007 Ford Explorer Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Transmission Parts and more.

What is your return policy for Ford Explorer Transmission Parts?

Advance Auto Parts keeps returns simple. For new Ford Explorer Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2007 Ford Explorer Transmission Parts

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-5707)

Felpro – Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (Part No.TOS 18742)

National – Automatic Transmission Torque Converter Seal (Part No.710712)

Dorman – Transmission Oil Cooler Pressure and Return Line With Bypass Valve (Part No.724-002)

Dorman – Transmission Electrical Connector Sealing Sleeve (Part No.917-138)

National – Automatic Transmission Extension Housing Seal (Part No.710486)

ATP – AT CONTR SHAFT SEAL (Part No.FO-15)

Dorman – Transmission Range Sensor Connector (Part No.645-801)

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.FM68HD)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1613)

Driveworks – Taper Bearing Set (Part No.S-A-36)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-707)

Driveworks – Main Bearing Repair Sleeve (Part No.S-99181)

Carquest Premium – Neutral Safety Switch (Part No.SBA4482)

Carquest Premium – Multi-Use Connector (Part No.PTA1471)

ATP – AT EXT HOUSING GSKT (Part No.FG-23)

Driveworks – Auto Transmission Torque Converter Seal (Part No.S-2658-V)

Carquest Premium – Automatic Transmission Speed Sensor (Part No.SNA1008)

National – Multi-Purpose Seal (Part No.3404)

National – Tapered Roller Bearing Cone (Part No.M802048)

Dorman – Transmission Line Connector (Part No.800-758)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Carquest Premium – Multi-Use Connector (Part No.PTA1235)

ATP – AT OIL PAN GASKET (Part No.FG-29)

Driveworks – Oil Seal (Part No.S-3604)

Dorman – Gearshift Control Cable (Part No.905-616)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243012)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-707)

Pro-King – Remanufactured Transmission Solenoid Block (Part No.RTS106)

Moveras – M01963 Remanufactured 6R60 Automatic Transmission Assembly (Part No.M01963)

Moveras – M01964 Remanufactured 6R60 Automatic Transmission Assembly (Part No.M01964)

Spartan – Automatic Transmission Assembly; Ford 4WD 5R55S 5-Speed (Part No.836B-SD)

Spartan – Automatic Transmission Assembly; Ford RWD 5R55S 5-Speed (Part No.837B-SD)

Shift Pro by ETE – 5R55S Automatic Transmission Assembly (Part No.T163014)

Shift Pro by ETE – 6R60 Automatic Transmission Assembly (Part No.T162703)

Shift Pro by ETE – 6R60 Automatic Transmission Assembly (Part No.T162704)

Shift Pro by ETE – 5R55S Automatic Transmission Assembly (Part No.T163013)

Premium Drive Train – Premium Remanufactured Automatic Transmission (Part No.T5R55S4002T2)

Premium Drive Train – Premium Remanufactured Automatic Transmission (Part No.T5R55S4002T4)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCE1024)

Schaeffler – Repair Sleeve (Part No.SR3501)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCC1185)

National – Multi-Purpose Seal (Part No.710484)

National – Multi-Purpose Seal (Part No.3604)

Driveworks – Oil Seal (Part No.S-3604)

National – Multi-Purpose Seal (Part No.710780)

ATP – AT CONTR SHAFT SEAL (Part No.FO-15)

National – Multi-Purpose Seal (Part No.7929S)

National – Multi-Purpose Seal (Part No.710535)

Dorman – Transmission Electrical Connector Sealing Sleeve (Part No.917-138)

Driveworks – Oil Seal (Part No.S-710535)

National – Multi Purpose Seal (Part No.710690)

National – Automatic Transmission Extension Housing Seal (Part No.710487)

Driveworks – Main Bearing Repair Sleeve (Part No.S-99181)

National – Automatic Transmission Extension Housing Seal (Part No.710486)

National – Automatic Transmission Output Shaft Seal (Part No.710671)

URO Parts – At Plug Sealing Sleeve (Part No.24347588725)

National – Bearing Race (Part No.M88010)

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-5707)

National – Tapered Roller Bearing Cone (Part No.LM501349)

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

Schaeffler – Cone (Part No.KLM603049)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243012)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.241018)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242016)

Dorman – Transmission Oil Cooler Line (Part No.624-278)

Dorman – Transmission Oil Cooler (Part No.918-200)