2007 Ford E-450 Super Duty Fuel and Emissions Systems

Name: Exhaust Gas Recirculation (EGR) Valve Gasket
Brand: Felpro
SKU: ES 72961
Price: 9.99 USD

Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 2007 E-450 Super Duty. Advance Auto Parts has popular E-450 Super Duty parts like Air Flow Sensors, Fuel Pumps, Fuel Injectors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other E-450 Super Duty model years including 2014, 2015, 2016, 2017, 2018, 2019, 2021, 2022, 2023 and more. Select a category of 2007 Ford E-450 Super Duty Fuel and Emissions Systems below and start saving instantly.

Popular 2007 Ford E-450 Super Duty Fuel and Emissions Systems Categories

Fuel Pump Driver Modules

Fuel Injector Control Modules

Air Flow Meters and Mass Air

EGR Pressure Feedback Sensors

Gas Caps

Diesel Injection Control Pressure Sensors

Vacuum Pumps

Fuel Pumps

Oxygen Sensors

Fuel Injection Nozzles

Vapor Canister Vent Solenoids

Diesel Injection High Pressure Oil Pumps

Fuel Lift Pumps

Fuel Injector Sleeves

Fuel Injection Pressure Sensors

MAP-Barometric Pressures

Vacuum Reservoirs

Manifold Air Pressure Sensors

Canister Purge Solenoids

Fuel Tanks

EGR Valves

Fuel Injectors

Fuel Pump Hanger Assemblies

Idle Air Parts

Fuel Injector Rail Seals

Vapor Canisters

EGR Coolers

Fuel Tank Pressure Sensors

Water In Fuel Sensors

Pressure Regulators

Air Charge Temperature Sensors

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Electric Pump Filter and Strainers

Smog and Vacuum Pump Pulleys

Fuel Injector Seal Kits

Fuel Injection Idle Air Control Valve Gaskets

Fuel Injector Gaskets

Fuel Pressure Regulator Kits

Fuel Tank Filler Necks

Fuel Tank Vent Valves

Fuel Injection Pressure Regulator Seals

Mass Air Flow Sensor Connectors

Fuel Line Connectors

Oxygen Sensor Connectors

Idle Air Control Valve Connectors

EGR Valve Gaskets

Fuel Pump Driver Module Connectors

EGR Gasket Sets

EGR Vacuum Regulator Solenoid Connectors

Fuel Cap Tester Adapters

Fuel Injection Timing Sensors

Vacuum Actuators

Essential Fuel and Emissions Systems for 2007 Ford E-450 Super Duties

from

$9.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$139.99

CARDONE Remanufactured Vacuum Pumps are engineered for quick installation and no comebacks. Each unit is engineered and tested to meet or exceed O.E.M performance, providing you reliable performance, every time. Original design weaknesses are corrected to make a longer lasting part you and your vehicle can rely on.

Product Features:

100 percent NEW check valves, diaphragms, O-rings and seals prevent leaks and ensure proper vacuum required to efficiently run vehicle accessories.
100 percent computer testing guarantees reliable performance.
Engineered to meet or exceed O.E.M.performance.
Designed for easy installation.
Guaranteed fit and function.

from

$279.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$716.99

This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:

Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
Quality assured – this part has been validated to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States

from

$15.99

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can result in combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

Original equipment fit, form and function

from

$299.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start-ups.
Pump is designed for diesel engines and applications
Always check fuel filter when replacing the fuel pump

from

$96.99

Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.

Product Features:

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

from

$61.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$45.99

This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$129.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK¿s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK¿s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

The Fuel Injection Timing Sensor applies to diesel engine operating systems. The fuel injection timing sensor is typically mounted on the injection pump to report injection pump timing.
NTK’s Fuel Injection Timing Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper timing of the vehicle’s fuel delivery system.

from

$125.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Delphi products are manufactured in a Delphi ISO certified facility
Manufactured to meet or exceed OE requirements
Part is validated, tested and matched to the right vehicle application
End of the line testing ensures quality in every box

from

$15.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$544.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$66.99

Delphi’s 100% OE replacement idle air control valves allow for accurate, stable, and precise air flow during the idle phase
Provides superior fit resulting in an easier installations
Maximizes fuel and engine efficiency
Manufactured and engineered with premium quality and stringent standards eliminating potential for malfunctions

from

$73.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$11.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$62.99

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

from

$78.99

This replacement A/C vacuum actuator is engineered to match the fit and function of the original equipment vacuum actuator on specified vehicles. Made of quality materials, it’s designed for a reliable service life.

Product Features:

Ideal replacement – this A/C vacuum actuator directly replaces the original equipment actuator on specified vehicle years, makes and models
Durable construction – this vacuum actuator is made of quality materials for reliable performance
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$15.99

All Motorcraft Seal designs undergo rigorous lab and real world tests in order to provide original equipment performance and reliability. Motorcraft Seals are extensively tested for proper seating and sealing under both temperature and pressure extremes.

Product Features:

Why Buy:
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the manufacture of the vehicle are included in these aftermarket replacement parts, ensuring the most current technology and performance

from

$165.99

Fuel filler neck leaking? This replacement fuel filler neck is precision-engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:

Direct replacement – this fuel filler neck is made to match the original equipment on specific vehicles
Durable construction – made of corrosion-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$164.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

The Exhaust Gas Recirculation (EGR) Pressure sensor detects exhaust gas flow through the EGR passage.
NTK’s EGR Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring and adjustments to the ignition and injector performance.

from

$322.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Fuel Injector Assembly consists of a cylindrical housing with an electric solenoid-controlled plunger valve mounted inside
When the solenoid is electrically actuated by the engine control module, the plunger valve opens, allowing fuel to reach the spray head that injects atomized fuel into the cylinder to be mixed with oxygen for combustion.
The resulting explosive air/fuel mixture is compressed by the upward moving piston and ignited by a spark plug or glow plug to power the engine.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into every Motorcraft Fuel Injector Assembly, ensuring the most current technology.
Motorcraft Fuel Injector Assemblies are built to last: corrosion resistant, pressure-tested and engineered to perform under extreme conditions and meet Ford’s exacting OE specifications, performance and quality standards.

from

$71.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$20.99

This fuel injector rail plug replaces the original part on diesel vehicles. Made from high quality, durable materials, it keeps high pressure oil in the oil rails to power the fuel injectors.

Product Features:

Direct replacement – this fuel injector rail plug replaces the original part on diesel vehicles
Necessary repair – fixes leaking high-pressure oil tubes that cause the engine to run poorly or not at all
Common fix – O-rings require replacement when going into the oil galley for service
Related parts – high pressure oil stand pipe sold separately

from

$43.99

This fuel pump strainer is designed to match the fit and function of the original strainer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump strainer is designed to match the fit and function of the original strainer on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$61.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$42.99

This fuel pump driver module connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel pump driver module connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$125.99

Tight seals are essential to proper EGR cooler operation. This EGR cooler gasket kit contains all the gaskets and seals required to ensure a solid repair. Made of quality materials, this kit is a direct replacement for original equipment parts.

Product Features:

Direct replacement – this exhaust gas recirculation (EGR) gasket kit matches the original equipment gaskets for this vehicle application
Durable construction – the components in this EGR cooler gasket kit are made of quality materials for a secure fit and excellent durability
Convenient solution – the gaskets in this kit should be replaced whenever repairs are performed on the EGR cooler, intake manifold or oil cooler
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

Upgrade your 2007 Ford E-450 Super Duty with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2007 Ford E-450 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your E-450 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 136 Fuel and Emissions Systems for the 2007 Ford E-450 Super Duty, designed to meet your needs without breaking the bank. From Air Flow Sensor replacements to Fuel Pumps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2007 Ford E-450 Super Duty at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.99 to $2,000.00, with an average price of $170.53. Our 136 Fuel and Emissions Systems in stock come from 16 trusted brands, so you’re sure to find the right part for your 2007 Ford E-450 Super Duty without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Ford E-450 Super Duty, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch, FELPRO, Dorman, and more. Bosch Fuel and Emissions Systems start at just $50.99 and boast an impressive 4.7 stars average rating from customers. FELPRO and Dorman also bring quality to the table, with Fuel and Emissions Systems available starting at $2.99, and at an average 4.6 stars rating. With 1,085 customer reviews and counting, our 2007 Ford E-450 Super Duty Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Ford E-450 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your E-450 Super Duty in top shape, all in one place. Start shopping confidently below for your 2007 Ford E-450 Super Duty!

Best-Selling Air Flow Sensors for 2007 Ford E-450 Super Duties

Enhance the driving experience in your Ford with 8 quality Air Flow Sensor components, starting at $46.99.

show more show less

from

$76.99

The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.

from

$71.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$91.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Inputs from the camshaft, throttle position and crankshaft sensors provide the Power-train Control Module (PCM) the information needed to make the vehicle perform efficiently.
The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
Designed for long service life under harsh under-hood conditions.
Designed with OE electrical connectors ensuring proper fits.
Application-specific, one-size-fits-all design.

from

$65.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$125.99

Delphi products are manufactured in a Delphi ISO certified facility
Manufactured to meet or exceed OE requirements
Part is validated, tested and matched to the right vehicle application
End of the line testing ensures quality in every box

from

$86.99

Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$69.99

Wire Assembly

from

$46.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

Most Popular 2007 Ford E-450 Super Duty Fuel Pumps

Customize your Ford with 18 Fuel Pumps products like Fuel Pumps, Electric Pump Filter and Strainers, and Fuel Pump Hanger Assemblies, all priced under $395.99.

show more show less

from

$43.99

This fuel pump strainer is designed to match the fit and function of the original strainer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump strainer is designed to match the fit and function of the original strainer on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$121.99

The original equipment fuel pump driver module on millions of Ford, Lincoln, Mazda and Mercury vehicles often corrodes and fails over time due to its design and location. The module’s mounted to the frame, exposing it to road debris and making it hard to clean, and its die cast housing is susceptible to corrosion. This Dorman OE FIX replacement has a powder-coated housing to help increase longevity, and features newly designed rubber bushings to position the module off the frame, so that it doesn’t touch the dissimilar metal or accumulate debris underneath. As a bonus, inside is a reengineered microprocessor for improved response times. The module was designed and engineered in the United States, and fully assembled and tested at our advanced electronics facility in Lewisberry, Pennsylvania. Don’t replace your module with one that could fail the same way again, and don’t be fooled by lower-quality knock-offs of this improved design. Choose the Dorman OE FIX solution to truly fix your problem.

Product Features:

Upgraded components – this fuel pump driver module replaces the original equipment part with an improved microprocessor for better response time
Greater durability – powder-coated housing resists corrosion, and bushings position module away from steel frame for increased protection
Trustworthy quality – designed and engineered in the USA, and fully assembled and tested at our advanced electronics facility in Lewisberry, Pennsylvania
Hardware included – two sets of new fasteners included for a complete and reliable installation

from

$239.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$228.99

Carquest Premium fuel pump hanger assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump hanger assemblies are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump hanger assemblies are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$279.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$299.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start-ups.
Pump is designed for diesel engines and applications
Always check fuel filter when replacing the fuel pump

from

$253.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$278.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$285.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
When servicing the fuel system, always check the fuel filter for possible replacement
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$322.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$42.99

Direct replacement – this fuel pump driver module connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$64.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$395.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$395.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$243.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$217.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
When servicing the fuel system, always check the fuel filter for possible replacement
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$179.99

CARQUEST fuel pump hanger assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced rust-inhibiting finish for long-lasting durability
High-performance pump section assembly provides superior performance
Leading-edge inlet design to reduce friction and increase performance
Gradient density strainer designed for better contamination resistance

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Top Picks for 2007 Ford E-450 Super Duty Fuel Injectors

Upgrade Ford E-450 Super Duties with top-quality Fuel Injectors parts, including 43 OEM and aftermarket selections for your 2007 model.

show more show less

from

$2.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$209.99

The FICM on certain Ford and Navistar vehicles is mounted in a location where it’s exposed to constant heat and vibration, often causing the internal inverter board to stop working properly. When that happens, the only replacement available from the OEM is a complete module assembly, with a housing, controller board and power board, that needs to re-initialized to the vehicle using proprietary programming tools. This Dorman OE FIX fuel injector control module repair directly replaces only the inverter board to reduce the overall repair cost as well as avoid having to program the module, allowing for a DIY repair. This improved component also features an additional securing compound that helps control vibrations and make it less likely to fail the same way again.

Product Features:

Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration
Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board
No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future

from

$53.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$51.99

This fuel pressure regulator is engineered to match the function of the original equipment regulator on specified vehicles. It is engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning.

Product Features:

Direct replacement – this fuel pressure regulator is designed to match the fit and function of the original equipment regulator on specified vehicle
Ideal solution – engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$89.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$295.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$10.49

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$281.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100 percent to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance.

from

$81.99

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Complete kit comes with everything needed to rebuild the fuel filter housing after a weakened stock spring causes hard starting, stalling, poor fuel mileage, and poor acceleration
Includes fuel pressure regulator, gasket, O-rings, and hardware for ease of installation
Once installed, the new fuel pressure regulator will Increase fuel pressure by 10-15 PSI, maximizing performance and injector life
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$75.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$264.99

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

Original equipment fit, form and function
Manufactured to precise OE performance specifications
O-ring seals included and installed on new IPR valve

from

$617.99

CARQUEST premium Fuel Injection Control Module (FICM) for the Ford Power Stroke 6.0L is completely disassembled and all electronic components are tested. Common failure points in the original design are corrected. All defective components are replaced with upgraded components. The unit is pre-programmed with the latest software available which improves injector operation (NO REFLASH REQUIRED). Each unit is 100% tested under multiple operating conditions prior to shipment. Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.

Product Features:

Each unit is 100% tested to OE specifications
Preprogrammed plug-and-play ready which reduces installation time and cost
Upgraded module prevents common failure modes inherent with OE design
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$8.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$9.99

Premium OE quality materials
Services one injector

from

$14.99

Complete injector seal kit includes all seven components necessary to properly reseal injector when installed. All parts in kit are manufactured using premium OE quality materials.

Product Features:

Kit includes top high-pressure oil inlet seal and metal C clip, two injector body O-rings, copper combustion seal and two electrical plug seals
Premium OE quality materials
Services one injector

from

$322.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Fuel Injector Assembly consists of a cylindrical housing with an electric solenoid-controlled plunger valve mounted inside
When the solenoid is electrically actuated by the engine control module, the plunger valve opens, allowing fuel to reach the spray head that injects atomized fuel into the cylinder to be mixed with oxygen for combustion.
The resulting explosive air/fuel mixture is compressed by the upward moving piston and ignited by a spark plug or glow plug to power the engine.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into every Motorcraft Fuel Injector Assembly, ensuring the most current technology.
Motorcraft Fuel Injector Assemblies are built to last: corrosion resistant, pressure-tested and engineered to perform under extreme conditions and meet Ford’s exacting OE specifications, performance and quality standards.

from

$46.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$296.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes 100% replacement of the solenoids which eliminates wire insulation cracking and coil failure in the field
Includes 100% replacement of connector which ensures proper connection to vehicle wiring harness and proper fit and sealing through valve cover
Spool valves and housing are 100% leak and flow tested to meet or exceed OE specifications
New spool valves are designed with updated features to reduce injector stiction
Precision ground nozzles are 100% flow tested to ensure accurate and precise fuel delivery
Includes all new premium quality O-rings and seals
Includes copper combustion gasket
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$34.49

This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$774.99

CARQUEST premium 58-volt High Performance Fuel Injection Control Module (FICM) for the Ford Power Stroke 6.0L is completely disassembled and all electronic components are tested. Common failure points in the original design are corrected. All defective components are replaced with upgraded components. The stock unit is upgraded from 48 volts to 58 volts, which can improve injector operation and reduce injector stiction under cold operating conditions. The unit is pre-programmed with the latest software available. Each unit is 100% tested under multiple operating conditions prior to shipment. Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.

Product Features:

Each unit is 100% tested under multiple operating conditions
Preprogrammed plug-and-play ready which reduces installation time and cost
Upgraded module prevents common failure modes inherent with OE design
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

In-Demand Oxygen Sensors for 2007 Ford E-450 Super Duties

Select from 9 premium Oxygen Sensors parts for your 2007 Ford E-450 Super Duty, with prices ranging from $50.99 to $102.99.

show more show less

from

$72.99

O2 Sensor

from

$66.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$61.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$50.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$72.99

NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$79.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$102.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness
Recommend to use OTC 6500 Flexihead O2 Sensor Wrench

from

$76.99

OXYGEN SENSOR

from

$52.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Most Sold 2007 Ford E-450 Super Duty Gas Caps

Explore our best-selling Ford parts for the 2007 E-450 Super Duty among 6 OEM and aftermarket options starting from $18.29.

show more show less

from

$22.29

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$33.49

Product Features:

Reduces air pollution with proper sealing and venting
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$30.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$24.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$18.29

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Top-Rated Fuel and Emissions Systems Brands For Your 2007 Ford E-450 Super Duty

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2007 Ford E-450 Super Duties. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, FELPRO, and Dorman, and more. Fuel and Emissions Systems from these brands that fit a 2007 E-450 Super Duty start at just $2.99 and are rated as high as 4.7 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 2007 Ford E-450 Super Duty Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2007 Ford E-450 Super Duty, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 2007 Ford E-450 Super Duty. With over 3 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $50.99, with an average price of just $78.99. Plus, with over 175 customer reviews and an average rating of 4.7 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $50.99

(33)

Oxygen Sensor: 4 Wire, 18.94" Long, Heated, Exact Fit

“Ok”

from $61.99

(129)

Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit

“Good”

from $123.99

(13)

Pressure Sensor

“Worked just fine, easy install, fixed my check engine light.”

Popular FELPRO 2007 Ford E-450 Super Duty Fuel and Emissions Systems

FELPRO auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2007 Ford E-450 Super Duty owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2007 E-450 Super Duty, Advance Auto Parts carries a full inventory of 3 FELPRO Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these FELPRO Fuel and Emissions Systems range from $2.99 to $8.49, plus, with more than 118 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $5.49

(1)

Fuel Injection Throttle Body Mounting Gasket

“Really easy to put on”

from $8.49

(109)

Fuel Injector O-Ring Kit

“Good parts”

from $2.99

(8)

Fuel Injection Throttle Body Mounting Gasket

“It fit 05 f150 perfectly like it should.”

FAQs for 2007 Ford E-450 Super Duty Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2007 Ford E-450 Super Duties?

Out of 136 Fuel and Emissions Systems that fit 2007 Ford E-450 Super Duties, the following parts are the top sellers:

Fuel Injector O-Ring Kit (3504360) – $8.49
O2 Sensor (11977682) – $72.99
Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (20501734) – $66.99

What’s the price range for 2007 Ford E-450 Super Duty Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2007 Ford E-450 Super Duty start at $2.99 and go up to $2,000.00 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2007 Ford E-450 Super Duty?

The average price for Fuel and Emissions Systems for the 2007 Ford E-450 Super Duty is $170.53. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford E-450 Super Duty model years?

Yes, we currently carry Fuel and Emissions Systems for 20 model years of Ford E-450 Super Duties between 2003 and 2026. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Fuel and Emissions Systems for my 2007 Ford E-450 Super Duty?

The cheapest 2007 Ford E-450 Super Duty Fuel and Emissions Systems we carry in stock are:

Fuel Injection Throttle Body Mounting Gasket (15780628) – $2.99
Fuel Injection Idle Air Control Valve Gasket (12547257) – $2.99
THROTTLE BODY GASKET SET (20688609) – $3.29
Fuel Injection Throttle Body Mounting Gasket (20780049) – $3.49
Gasket (10307523) – $3.99

What are the top-rated Fuel and Emissions Systems that fit the 2007 Ford E-450 Super Duty?

Out of 1,085 reviews by customers, our 2007 Ford E-450 Super Duty Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2007 Ford E-450 Super Duty and their top-rated products:

Idle Air Control Parts
- Gasket (10307523) – $3.99
- THROTTLE BODY GASKET SET (20688609) – $3.29

What types of Fuel and Emissions Systems do you sell for my 2007 Ford E-450 Super Duty?

As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2007 Ford E-450 Super Duty:

Can I get help with 2007 Ford E-450 Super Duty Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.

What is your return policy for Ford E-450 Super Duty Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Ford E-450 Super Duty Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2007 Ford E-450 Super Duty Fuel and Emissions Systems

Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.ES 72961)

Cardone – Remanufactured Vacuum Pump (Part No.64-1029)

Carquest Premium – Fuel Pump Includes Includes Strainer (Part No.E2496004)

Dorman – Fuel Tank with Lock Ring and Seal (Part No.576-442)

Carquest Premium – Fuel Injector Sleeve (Part No.AC20252)

Delphi – Electric Fuel Lift Pump: With Gasket (Part No.HFP964)

Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPC1054)

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPE1192)

Dorman – Help – Vacuum Storage Canister (Part No.47995)

NTK – NTK Fuel Injection Timing Sensor (Part No.FC0035)

Delphi – Ambient Air Temperature Sensor (Part No.HTS131)

Carquest Premium – Diesel Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Motorcraft – Original Equipment (O.E.) Fuel Injector (Part No.CMR-7-RM)

Delphi – Fuel Injection Idle Air Control Valve (Part No.CV10088)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1049)

Victor Reinz – EGR Valve Gasket (Part No.71-13488-00)

Carquest Premium – Fuel Tank Vent Valve (Part No.RVC1002)

Dorman – Heater Blend Door Actuator (Part No.926-180)

Motorcraft – Fuel Injector O-Ring Kit (Part No.CM-4717)

Carquest – Fuel Tank Filler Neck (Part No.577-259)

NTK – EGR Pressure Sensor (Part No.EA0013)

Motorcraft – Original Equipment (O.E.) Fuel Injector (Part No.CN-5019-RM)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1026)

Dorman – High Pressure Oil Rail Plug (Part No.904-231)

Dorman – Fuel Sending Unit Pick Up Screen (Part No.904-419)

Bosch – Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit (Part No.15717)

Dorman – Six Wire Electrical Connector Pigtail (Part No.645-909)

Dorman – EGR Cooler/Intake Gasket Kit (Part No.904-265)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0198)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1026)

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.CX-1961)

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.DY-1137)

Delphi – Ambient Air Temperature Sensor (Part No.HTS131)

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10231)

Motorcraft – Wire Assembly (Part No.WPT-322)

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1282)

Dorman – Fuel Sending Unit Pick Up Screen (Part No.904-419)

Dorman – Fuel Pump Driver Module with Mounting Bolts (OE Fix) (Part No.590-001)

Carquest Premium – Fuel Pump (Part No.E3480528)

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump, Sending Unit and Strainer (Part No.HS2437620)

Carquest Premium – Fuel Pump Includes Includes Strainer (Part No.E2496004)

Delphi – Electric Fuel Lift Pump: With Gasket (Part No.HFP964)

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump, Sending Unit and Strainer (Part No.HS2510436)

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump, Sending Unit and Strainer (Part No.HS2496125)

Delphi – Fuel Pump and Strainer Set: With Seal, Harness & Connector, Isolator, S-shaped Hose, Metal Clamps (Part No.FE0441)

Delphi – Fuel Pump Hanger Assembly: With Float Arm (Part No.HP10195)

Dorman – Six Wire Electrical Connector Pigtail (Part No.645-909)

Carquest Premium – Fuel Pump Driver Module (Part No.FPC1087)

Delphi – Fuel Pump Hanger Assembly: With Float Arm (Part No.HP10196)

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Seal, Nuts, Washers, Retainer Clips (Part No.HP10216)

Carquest Premium – Fuel Pump Driver Module (Part No.FPC1093)

Delphi – Fuel Pump and Strainer Set: With Seal, Harness and Connector, Isolator, Hose, Metal Clamps, Zip Tie (Part No.FE0442)

Spectra Premium – Fuel Pump and Sender Assembly (Part No.SP2091H)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61050)

Dorman – Fuel Injection Control Module Repair Kit – No Flash Required (OE Fix) (Part No.904-229)

MAHLE Original – Fuel Injection Nozzle O-Ring Kit (Part No.GS33711)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61103)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Dorman – Fuel Pressure Regulator (Part No.904-239)

Spectra Premium – Mass Air Flow Sensor (Part No.MA147)

Carquest – Fuel Injector (Part No.67528)

Dorman – Diesel Fuel Injector O-ring Kit (Part No.904-207)

Cardone – Fuel Injector (Part No.2J-201)

Tech Smart – Fuel Pressure Regulator Service Kit (Part No.R81001)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6206)

Carquest Premium – Injection Pressure Regulator (IPR) Valve (Part No.AC20292)

Carquest Premium – Remanufactured Fuel Injection Control Module (FICM) (Part No.AE11242)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS008)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)

Carquest Premium – Fuel Injector Seal Kit (Part No.AC20152)

Motorcraft – Original Equipment (O.E.) Fuel Injector (Part No.CN-5019-RM)

MAHLE Original – Fuel Injection Nozzle O-Ring Kit (Part No.GS33442)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25072)

Carquest – Fuel Injector Seal Kit (Part No.274838)

Dorman – Fuel Injection Pressure Regulator Seal Kit (Part No.904-415)

Carquest Premium – Reman Multi Port Fuel Injector (Part No.A211-1672)

Carquest Premium – Remanufactured 58 Volt High Performance Fuel Injection Control Module (FICM) (Part No.AE1158P2)

Motorcraft – O2 Sensor (Part No.DY-1401)