2007 Dodge Ram 3500 Hubs and Hub Assemblies
More 2007 Dodge Ram 3500 Hubs and Hub Assemblies
Find your specific 2007 Dodge Ram 3500 original or aftermarket Hubs and Hub Assemblies below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2007 Dodge Ram 3500 Hubs and Hub Assemblies
Rugged Ridge – Locking Hub (Part No.15001.18)
from
$286.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Yukon Gear – Spin Free Locking Hub Conversion Kit For 2009 Dodge 2500/3500 (Part No.21791)
from
$3006.99
The Yukon worry free Spin Free Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation. .
Product Features:
See More
Product Features:
- Fits 2009 Dodge 2500/3500
- Includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, premium locking hubs, Timken bearings, high quality seals and all hardware for installation.
- 8 lug
- Compatible with ABS applications
Yukon Gear – Hardcore Locking Hub Set For ’00-’08 Dodge 1-Ton Front With Spin Free Kit, 1 Side Only (Part No.29100)
from
$379.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This is a hub kit for one side only.
Product Features:
See More
Product Features:
- Fits 2000-2008 Dodge one ton with Spin Free kit
- 35 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
Yukon Gear – Spin Free Locking Hub Conversion Kit For 2010-2011 Dodge 2500/3500, SRW (Part No.21792)
from
$3006.99
The Yukon worry free Spin Free Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation.
Product Features:
See More
Product Features:
- Fits 2010-2011 Dodge 2500/3500
- Includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, premium locking hubs, Timken bearings, high quality seals and all hardware for installation.
- 8 lug
Yukon Gear – Spin Free Locking Hub Conversion Kit For 2010-2011 Dodge 2500/3500, DRW (Part No.21817)
from
$3035.00
The Yukon worry free Spin Free Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation.
Product Features:
See More
Product Features:
- Fits 2010-2011 Dodge 2500/3500
- Includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, premium locking hubs, Timken bearings, high quality seals and all hardware for installation.
Yukon Gear – Spin Free Locking Hub Conversion Kit For SRW Dana 60 94-99 Dodge (Part No.21727)
from
$3330.00
Locking Hub Conversion Kit for ’94-’99 Dodge Dana 60. The Yukon worry free Spin Free Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation. This kit is not compatible with vehicles with 4-wheel ABS / Dual Rear Wheels.
Product Features:
See More
Product Features:
- Fits 1994-1999 Dodge one ton
- Includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation.
- Not compatible with four wheel ABS applications
Yukon Gear – Hardcore Locking Hub Set For ’00-’08 Dodge 1-Ton Front With Spin Free Kit (Part No.29098)
from
$679.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect.
Product Features:
See More
Product Features:
- Fits 2000-2008 Dodge one ton with Spin Free kit
- 35 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
FEQ – Wheel Hub Assembly (Part No.K7001219118FEQ)
from
$94.70
FEQ manufactures OE quality wheel hub assemblies that provide heavy duty performance, improved fuel economy and reduced weight. FEQ wheel bearing hubs are maintenance free – fully lubricated and sealed for life.
Product Features:
See More
Product Features:
- Integrated sensors and electronics for reliable function
- Factory sealed assembly eliminates contamination
- No need for pre-load adjustment at assembly
- Compact and lightweight
- Minimizes axial space requirements
SKF – Wheel Hub Assembly (Part No.K7001337457SKF)
from
$750.70
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. SKF wheel hub bearing units carry a flange for wheel and brake rotor attachment and a second flange for fixing the unit to the suspension. This fully integrated system provides a significant simplification in corner design and handling when compared with more traditional designs. The dynamic load carrying capacity is maximized by the use of a separate inner ring for the inboard ball row. This ring is mounted with an interference fit. The outer ring flange is bolted to the suspension. The rotating inner ring, with its tough flange, spigot and threaded holes or studs, is designed for mounting of the brake and wheel. Greased and sealed for life, the SKF wheel hub assembly is used for both driven and non-driven wheel applications. For driven wheel applications, torque is transmitted to the inner ring via an included spline.
Product Features:
See More
Product Features:
- OE sensors assure correct ABS functions
- Premium seals, both inboard and outboard, protect the bearing
- Wheel bearing design with ball bearings or tapered roller bearings and integral wheel hub.
- The bearing units have preset internal clearance, are supplied greased for life and have integrated seals.
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
- Precise assembly tolerances Installation Note: Some bearings contain active wheel sensors. These wheel sensors normally work together with magnetic ABS sensor rings. These sensor rings have a magnetic north and south poles lying next to each other in its circumference. These magnetic poles must always lie opposite the wheel sensor. If, the wheel bearing is installed improperly, the system wheel sensor and magnetic sensor gear cannot supply a signal making the ABS system inoperable. The ATE Test Card for Magnetic Sensor Gears will assist in prevention of these errors. PN# 760130 ATE
SKF – Wheel Hub Assembly (Part No.K7001218666SKF)
from
$428.13
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. SKF wheel hub bearing units carry a flange for wheel and brake rotor attachment and a second flange for fixing the unit to the suspension. This fully integrated system provides a significant simplification in corner design and handling when compared with more traditional designs. The dynamic load carrying capacity is maximized by the use of a separate inner ring for the inboard ball row. This ring is mounted with an interference fit. The outer ring flange is bolted to the suspension. The rotating inner ring, with its tough flange, spigot and threaded holes or studs, is designed for mounting of the brake and wheel. Greased and sealed for life, the SKF wheel hub assembly is used for both driven and non-driven wheel applications. For driven wheel applications, torque is transmitted to the inner ring via an included spline.
Product Features:
See More
Product Features:
- OE sensors assure correct ABS functions
- Premium seals, both inboard and outboard, protect the bearing
- Wheel bearing design with ball bearings or tapered roller bearings and integral wheel hub.
- The bearing units have preset internal clearance, are supplied greased for life and have integrated seals.
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
Yukon Gear – Hardcore Locking Hub Set For ’94-’99 Dodge Dana 60 With Spin Free Kit (Part No.29097)
from
$641.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect.
Product Features:
See More
Product Features:
- Fits 1994 – 1999 Dodge with Dana Spicer 60 and Spin Free kit
- 35 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
SKF – Wheel Hub Assembly (Part No.K7001217737SKF)
from
$567.65
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. SKF wheel hub bearing units carry a flange for wheel and brake rotor attachment and a second flange for fixing the unit to the suspension. This fully integrated system provides a significant simplification in corner design and handling when compared with more traditional designs. The dynamic load carrying capacity is maximized by the use of a separate inner ring for the inboard ball row. This ring is mounted with an interference fit. The outer ring flange is bolted to the suspension. The rotating inner ring, with its tough flange, spigot and threaded holes or studs, is designed for mounting of the brake and wheel. Greased and sealed for life, the SKF wheel hub assembly is used for both driven and non-driven wheel applications. For driven wheel applications, torque is transmitted to the inner ring via an included spline.
Product Features:
See More
Product Features:
- OE sensors assure correct ABS functions
- Premium seals, both inboard and outboard, protect the bearing
- Wheel bearing design with ball bearings or tapered roller bearings and integral wheel hub.
- The bearing units have preset internal clearance, are supplied greased for life and have integrated seals.
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
Popular 2007 Dodge Ram 3500 Hubs and Hub Assemblies Categories
2007 Dodge Ram 3500 Hubs and Hub Assemblies
Maybe you’re in the middle of a full rebuild of that 2007 Dodge Ram 3500. Maybe you just need a couple of Hubs and Hub Assemblies. Either way, Advance Auto Parts has 3 different Hubs and Hub Assemblies in our inventory ranging from $379.99 to $750.70. That means you can find the exact parts or products you need to keep that 2007 Dodge Ram 3500 running smoothly.
Hubs and Hub Assemblies are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 2007 Dodge Ram 3500. SKF and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Hubs and Hub Assemblies for your 2007 Dodge Ram 3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Hubs and Hub Assemblies to keep your 2007 Dodge Ram 3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Hubs and Hub Assemblies Brands To Make Your 2007 Dodge Ram 3500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2007 Dodge Ram 3500 demands trusted brand parts and products to keep it running. Many trusted brands of Hubs and Hub Assemblies make up Advance Auto Parts’ inventory, and all are ready to help make your Ram 3500 the best it can be. Be sure to browse some of our top Hubs and Hub Assemblies brands and parts.
FAQs for 2007 Dodge Ram 3500 Hubs and Hub Assemblies
What are the most purchased Hubs and Hub Assemblies for the 2007 Dodge Ram 3500?
Out of 3 Hubs and Hub Assemblies for the 2007 Dodge Ram 3500, the most popular in our inventory are:
from
$379.99
This product is not rated
Hardcore Locking Hub Set For ’00-’08 Dodge 1-Ton Front With Spin Free Kit, 1 Side Only
Locking Hub Service Kits
from
$679.99
This product is not rated
Hardcore Locking Hub Set For ’00-’08 Dodge 1-Ton Front With Spin Free Kit
Axle Hubs
