2007 Chrysler Pacifica Oil and Lubricants

Pennzoil Platinum High Mileage SAE 10W-30 is a full synthetic motor oil that is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil high mileage portfolio. As your car ages, leaks may develop and cause higher oil consumption and burn off, potentially causing your engine to need frequent top-offs. Pennzoil Platinum High Mileage motor oil is enhanced with an excellent combination of special conditioning seal agents and additives to help stop leaks from seals and reduce the oil consumption that is typical of older and worn engines. Our full synthetic high mileage motor oil also protects engines for loss of horsepower, offers excellent performance in extreme temperatures, and provides unsurpassed wear protection, and protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Pennzoil Platinum High Mileage SAE 10W-30 is engineered to help keep engines clean by gently lifting deposits and keeping them away from critical moving engine parts In fact, it keeps pistons up to 50% cleaner than the toughest industry standards.

Product Features:

• Designed for for vehicles with over 75,000 miles
• Pennzoil Platinum High Mileage 10W-30 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results)
• No other leading high mileage motor oil provides better protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
• Formulated to deliver less oil burn off than high mileage motor oils made from crude oil
• Helps protect engines from loss of horsepower
• Provides faster low-temperature oil flow and protects in extreme heat
• Revolutionary PurePlus Technology: Engineered from Pennzoil’s patented PurePlus gas-to-liquid technology, converting pure natural gas into high-quality, full synthetic base oil that is 99.5% pure.
• Enhanced Leak Protection: Contains special conditioning seal agents and additives designed to help stop leaks from seals and reduce oil consumption in older and worn engines.
• Advanced Protection for Modern Engines: Protects against abnormal combustion phenomena like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines, helping to maintain engine performance and efficiency.

Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:

• HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
• EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
• REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
• FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
• SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions

Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 0W-20. This formula utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 5W-20 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is America’s #1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing¿results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:

• Mobil 1 high mileage full-synthetic engine oil 5w-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.(1)
• Utilizes Mobil 1’s signature triple action formula to deliver outstanding engine performance, protection, and cleanliness
• Meets ilsac gf-6 standards to help provide low-speed pre-ignition (lspi ) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees f ) and low temperature protection (to -30 degrees f )
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Manufacturer part number: 120768

CASTROL EDGE 5W-20 Full Synthetic Motor Oil 1 Quart is the perfect choice for drivers who want the best engine performance. This oil is Castrol’s strongest oil, formulated with Fluid TITANIUM Technology, which provides maximum sludge protection, wear protection, and engine performance. It is 3X stronger against viscosity breakdown than traditional oils, 10X better in high-temperature performance, and 6X better in wear protection. This oil meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, and other industry standards. It is a full synthetic oil with an SAE weight of 5W-20, which means it is suitable for use in most modern engines. With Castrol EDGE, you can unlock maximum performance with every drive.

Product Features:

• 3x stronger against viscosity breakdown than the leading full synthetic – based on kurt orbahn test in 5W-30 grade
• 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
• 6x better wear protection – as measured in seq iva test vs. latest test limit
• Meets api sp/sn plus, ilsac gf-6, acea a1/b1, acea c5, gm dexos1 gen 2, meets ford wss-m2c960-a1 and wss-m2c945-b1, meets engine test requirements of chrysler ms 6395
• Syntec Power Technology: The reformulated EDGE Engine Oil with Syntec Power Technology provides even better performance, making it the perfect choice for drivers who demand the best from their engines.
• Full Synthetic Oil Composition: The oil composition of EDGE Engine Oil is full synthetic, providing superior protection against sludge buildup and wear, ensuring maximum engine performance.

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

• Better wear protection
• Increased fuel efficiency
• Better protection of the expensive catalytic emission system
• Improved compatibility with fuels containing ethanol
• Superior corrosion protection
• Meets ILSAC GF-5 and Dexos1 performance requirements

Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 0W-20. This formula utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup-keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 5W-20 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks-including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is America’s No. 1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing, results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending September 30, 2023)

Product Features:

• Mobil 1 High Mileage full-synthetic motor oil 5W-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes. (1)
• Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Manufacturer Part Number: 120455

Unlike conventional cars, a hybrid has different demands placed on its engine and motor oil. The frequent stop-and-start cycle and longer periods of inactivity don’t allow the engine and oil to reach optimal operating temperature for proper protection. That can lead to increased condensation and fuel dilution, causing corrosion, engine wear, and sludge. It can also hurt a hybrid vehicle’s fuel efficiency. That’s why Valvoline formulated a Hybrid Vehicle Full Synthetic Motor Oil. Engineered for the specific needs of hybrids, our exclusive Trap and Lock Technology suspends water molecules in the oil to prevent damage from fuel and water, while ensuring proper lubrication of all metal surfaces. Valvoline Hybrid Vehicle Full Synthetic features an anti-corrosion shield for enhanced protection against rust. Whether your hybrid uses 0W-20 full synthetic or another grade, Valvoline has a full synthetic motor oil to protect your hardworking hybrid. Keep your engine running efficiently mile after mile with Valvoline Full Synthetic Motor Oil. Look for Valvoline’s complete line of Hybrid Performance Fluids – from the original motor oil brand trusted for more than 150 years.

Product Features:

• Engineered specifically for hybrid vehicles
• Because a hybrid vehicle engine starts and stops frequently, the engine oil doesn’t reach optimal operating temperature, leading to condensation and fuel dilution
• Valvoline’s innovative trap and lock technology suspends water molecules in the oil to prevent damage from fuel and water
• Anti-corrosion shield provides enhanced protection against rust
• Formulated for Hybrid Vehicles: Valvoline Hybrid Full Synthetic Engine Oil is specifically designed to meet the unique demands of hybrid engines, providing optimal protection and performance.

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for high mileage engines: FRAM High Mileage 10W30 Engine Oil is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it the perfect choice for vehicles with over 75,000 miles.

The Valvoline Advanced Full Synthetic 0W-20 Motor Oil is a high-quality engine oil that is designed to maximize the life of your engine. This product is available in a 1-quart size and is formulated with conventional oil composition. The oil class is standard and the SAE oil weight is 0W-20. This engine oil is perfect for those who want to keep their engine running smoothly and efficiently. It is designed to provide superior protection against wear and tear, as well as reduce engine deposits and sludge. With its advanced formula, this motor oil is sure to keep your engine running at its best for years to come. If you want to ensure the longevity of your engine, the Valvoline Advanced Full Synthetic 0W-20 Motor Oil is an excellent choice.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

• 3x stronger against viscosity breakdown than leading full synthetic (based on kurt orbahn test in 5W-30 grade)
• 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
• 6x better wear protection
• 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
• Full Synthetic Oil Composition: Castrol EDGE w/SPT Engine Oil is a full synthetic oil that contains new powerful dispersant molecules, providing superior engine protection and performance.
• Strongest Oil: Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil, providing the best combination of sludge protection, wear protection, and maximum engine performance.

FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Protection for Advanced Engine Designs: Specifically designed for gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, providing increased protection and preventing low-speed pre-ignition (LSPI) which can lead to premature engine failure.
• Increased Wear Protection and Stability: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, ensuring long-lasting engine performance and reliability.

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• Synthetic Blend: Our unique combination of synthetic and premium conventional oils provides superior protection against wear, friction, heat, and deposits.

Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:

• Patented Phosphorus Replacement Technology to help extend the life of your emission system
• 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
• 6X Better Wear Protection (As measured in latest Sequence IVA engine test)
• 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
• Full Synthetic Composition: The 0W-20 full synthetic oil composition provides superior performance and protection, making it ideal for high mileage cars that operate under extreme temperatures.
• Enhanced Engine Performance: Designed to help your car defy its miles, Castrol EDGE High Mileage helps maintain and extend maximum performance and efficiency as your vehicle ages.
• Optimal for High Mileage Vehicles: Specifically formulated for high mileage cars, this oil helps prevent performance loss and efficiency decline, ensuring your vehicle runs smoothly even as it ages.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-Speed Pre-Ignition Control
• Chain Wear Protection
• Piston Cleanliness
• Turbo-Compatibility
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
• High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
• Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
• SAE oil weight of 10W-30, making it a dependable choice for various engine types.

Castrol EDGE 10W-30 Full Synthetic Motor Oil is Castrol’s strongest oil, ideal for drivers seeking the best in sludge protection, wear protection, and maximum engine performance. This oil is 3X stronger against viscosity breakdown than the leading full synthetic, 10X better in high-temperature performance, and offers 6X better wear protection. It meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M, and 4718M standards, and fulfills the engine test requirements of Chrysler MS 6395, ensuring top-tier performance and reliability. Unlock maximum performance with every drive.

Product Features:

• 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
• 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
• 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
• Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395
• Advanced Fluid TITANIUM Technology: Incorporates Fluid TITANIUM Technology, making it Castrol’s strongest oil for drivers who demand the best in sludge protection, wear protection, and maximum engine performance.

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• MaxLife High Mileage Synthetic Blend Engine Oil is specially designed for engines with over 75,000 miles, providing greater protection and maximizing engine life.

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 0W-20. This formula utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 0W-20 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is America’s No. 1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing¿results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:

• Mobil 1 High Mileage full-synthetic motor oil 0W-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.(1)
• Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI ) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees F ) and low temperature protection (to -30 degrees F )
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Manufacturer Part Number: 122535
• Extended Engine Life: This high mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes.
• Temperature Control: Proven to cool engine temperatures by over 10%, Mobil 1 helps to keep your engine running at lower temperatures compared to conventional oil.
• Oxidation Control: Mobil 1 High Mileage full-synthetic motor oil 0W-20 helps control oxidation to prevent oil breakdown, ensuring long-lasting performance and protection.
• Versatile Compatibility: Recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines.

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
• Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
• Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
• Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.

Keep your engine running at peak efficiency while improving fuel economy. Engineered for today’s advanced engines, Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 helps to improve fuel economy (1) and extend engine life for vehicles of all ages. Mobil 1 Advanced Fuel Economy utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to your vehicle. Specialty components in synthetic oil reduce friction, helping to prevent deposits and sludge buildup to keep critical engine parts clean and protected for up to 10,000 miles between oil changes. (2) This technologically advanced formulation offers outstanding engine efficiency, wear protection, internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit)-bringing quick cold-weather starting and ultra-fast protection to your engine. Mobil 1 Advanced Fuel Economy meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 selling synthetic motor oil brand at retail, (3) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR.

Product Features:

• Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is low-viscosity to help improve fuel economy.(1)
• Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
• Helps protect critical engine parts for up to 10,000 miles between oil changes,(2) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Manufacturer Part Number: 124185
• (1)Potential fuel economy improvement obtained by switching from higher-viscosity oils to a lower-viscosity grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions, & your current engine oil viscosity
• (2) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US.
• (3) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending July 1, 2023)
• Versatile Compatibility: Recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light tru

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• Enhanced Oil Stability: Resists oil breakdown 10 times better than industry standards, providing consistent performance and reliability.
• Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

• Better wear protection
• Increased fuel efficiency
• Better protection of the expensive catalytic emission system
• Improved compatibility with fuels containing ethanol
• Superior corrosion protection
• High Performance: SAE 0W-20 Synthetic Engine Oil is specially formulated to provide high performance for gasoline and diesel engines of all types, including cars, trucks, SUVs, motorcycles, and boats.

Pennzoil Platinum full synthetic SAE 5W-20 motor oil is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high-quality base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil portfolio. Pennzoil Platinum full synthetic SAE 5W-20 motor oil is licensed and meets the vehicle warranty requirements of GM’s dexos 1 Gen 2 specifications that are set forth to meet today’s modern engine technologies. This means that our Pennzoil Platinum full synthetic products meet the stringent requirements of leading car manufacturers. Why does this matter? Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines.

Product Features:

• Engineered to provide a high-quality base oil using our revolutionary PurePlus gas-to-liquid technology in combination with a high performance additive system
• Helps protect against the effects of low speed pre-ignition (LSPI) in modern turbocharged engines
• Provides better fuel economy which helps you drive an extra 550 miles per year vs a dirty engine
• Offers unsurpassed wear protection by keeping engine parts from coming into contact
• Delivers outstanding piston cleanliness, keeping pistons up to 50% cleaner than required by the toughest industry standards- based on Sequence IIIH engine test results
• Specifications, Approvals and Recommendations: FCA MS-6395; Ford WSS-M2C945-B1; GM dexos1TM Gen 2
• Exceeds the requirements of the following industry specifications: API SN PLUS, API SN-RC and all previous categories; ILSAC GF-5; ACEA A1/B1
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual.

FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos®1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-20 and is a fully licensed GM dexos®1 Gen 2 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ, GM dexos«1 Gen 2, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of pre-mature engine failure.
• Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
• Versatile Compatibility: Suitable for a variety of engine types, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for many vehicles.

FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Protection for High Mileage Engines: Designed for engines with over 75,000 miles, this oil provides the ultimate protection, making it ideal for higher mileage vehicles.
• Advanced LSPI Prevention Technology: Contains additive technology to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines, helping to prevent premature engine fai

Castrol EDGE Extended Performance with Fluid TITANIUM Technology is Castrol’s most advanced full synthetic and the natural choice for drivers who demand outstanding performance and the assurance of protection during today’s longer drain intervals. It provides protection for 20,000 miles or a full year – guaranteed. Castrol EDGE Extended Performance features some of the best attributes of Castrol’s patented Fluid TITANIUM Technology that transforms its structure to be stronger under pressure. It helps keep metal apart to fight power-robbing friction, providing wear protection 6X better than required by the industry standard, while protecting under extreme conditions with 10X better high temperature performance.  Castrol EDGE Extended Performance provides the strength to extend drains for 20,000 miles and the muscle to maintain viscosity stability under the extreme force of the engine and protection from wear.  Unlock maximum engine performance.

Product Features:

• Extended drain interval of 20,000 miles or a full year (Whichever comes first)
• 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
• 6X Better Wear Protection (As measured in the latest Sequence IVA engine test)
• 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)

Pennzoil Platinum full synthetic SAE 0W-20 motor oil is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high-quality base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Pennzoil Platinum full synthetic SAE 0W-20 motor oil is licensed and meets the vehicle warranty requirements of GM’s dexos 1 Gen 2 specifications that are set forth to meet today’s modern engine technologies. This means that our Pennzoil Platinum full synthetic products meet the stringent requirements of leading car manufacturers. Why does this matter? Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines.

Product Features:

• Full synthetic 0W-20 engine oil made from made from natural gas, not crude, using Pennzoil’s patented gas-to-liquid PurePlus Technology
• Provides better fuel economy-drive on average an extra 550 miles per year (versus a dirty engine)
• Pennzoil Platinum 0W-20 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results)
• No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Helps protect engines from loss of power
• Formulated for modern turbocharged engines-GF-6, API SP/SP-Resource Conserving and all previous categories
• Superior Purity: Contains 99.5% pure base oil with fewer impurities compared to base oils made from crude oil, ensuring optimal engine performance.
• Advanced Additive Technology: Combines high-quality base oil with advanced additives to create one of the best formulations in the Pennzoil portfolio.
• Meets Modern Engine Requirements: Licensed and meets GM’s dexos 1 Gen 2 specifications, ensuring compatibility with today’s modern engine technologies and stringent car manufacturer requirements.
• Complete Engine Protection: Provides protection against abnormal combustion phenomena like low-speed pre-ignition in modern turbocharged gasoline direct injection (TGDI) engines, ensuring complete engine protection.

Valvoline Daily Protection Motor Oil is specially formulated to exceed industry standards for wear, deposit and sludge protection to help keep engines running like new. Developed with high quality additives and premium base oils, it’s designed to flow easily at cold temperatures, reducing wear at startup and providing added protection against motor oil breakdown in tough conditions. For enhanced fuel efficiency, choose Daily Protection Synthetic Blend 5W-20 or 5W-30. Developed with low-friction technology to support strong fuel economy.

Product Features:

• Extra wear protection designed to help keep automotive engine parts like new
• Added detergents help protect against sludge and deposits
• High quality additives resist motor oil breakdown in tough conditions
• Low-friction formula supports strong fuel efficiency
• Premium formulation flows easily at low temperatures reducing wear at start-up