2007 Chevrolet Monte Carlo Ignition and Tune-Up Products

Essential 2007 Chevrolet Monte Carlo Ignition and Tune-Up Products

Mr. Gasket – Hei Advance Curve Kit (Part No.929G)

Hei Advance Curve Kit

from

$16.49
One of the best, and sometimes missed tuning tricks is not to just optimize your initial timing, but to bring in timing advance more quickly than the stock distributor can allow. Bringing timing more quickly than stock can provide substantial increases in both torque and horsepower depending on your combination.This is done by changing the springs under the cap. This kit includes three sets of springs which can be used in different combinations to provide full advance sooner than stock. Use lighter springs to bring the advance more quickly, and heavier springs to bring it in more slowly. Two new weights with nylon bushings are also included as are instructions to help with installation. Springs are color code as follows: Light Springs – Black Medium Springs – Silver Heavy Springs – Gold

Product Features:
  • Brings in timing more quickly than stock for more torque and horsepower
  • Includes three sets of springs to allow for a wider range of custom tuning
  • Instructions included to help with installation
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1065)

Ignition Coil: Meets OE Specifications, 1 Count

from

$29.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

MSD Ignition – Wire Set; Super Conductor; Big Block Chevy with HEI Tower Cap (Part No.35609)

Wire Set; Super Conductor; Big Block Chevy with HEI Tower Cap

from

$154.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

GM Genuine Parts – Fuel Injection Fuel Rail Bolt (Part No.12554211)

Fuel Injection Fuel Rail Bolt

from

$9.99
GM Genuine Parts Studs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Ignition Wire Holder (Part No.F1060289679ACD)

Ignition Wire Holder

from

$2.05
Ignition Wire Holder

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3704)

Ignition Knock (Detonation) Sensor

from

$36.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3656)

Ignition Knock (Detonation) Sensor

from

$23.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IT20TT (Part No.4714)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IT20TT

from

$10.99
Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power & Torque of high performance.
  • Withstands temperatures greater than 4000° Fahrenheit
  • Iridium TT
See More

Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RJ6C (Part No.102)

Copper Plus Spark Plug: Dependable Performance, OE Replacement, RJ6C

from

$2.49
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Built to ISO and SAE standards for proven performance
See More

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31243)

Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor

from

$145.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

Carquest Premium – Spark Plug Wire Set (Part No.35-8346)

Spark Plug Wire Set

from

$83.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Ignition Switch (Part No.CSE1604)

Ignition Switch

from

$93.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Ignition Switch (Part No.CS84)

Ignition Switch

from

$24.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

ACDelco – Spark Plug Wire (Part No.356F)

Spark Plug Wire

from

$28.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1163)

Ignition Coil Connector

from

$18.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1162)

Ignition Coil Connector

from

$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

MSD Ignition – LS 2-Step Launch Control; for GM LS Engines (Part No.8733)

LS 2-Step Launch Control; for GM LS Engines

from

$319.99
GM performance fans will be geeked to learn about this direct plug-in 2-Step Launch control. The unit is easy to install with factory style connectors for a splice-free installation. When you’re staged, you can hold the pedal to the floor while the rpm stays at a consistent level producing consistent launches.

Product Features:
  • 2 Step Rev Limiter for LSx engines
  • Plug and Play
  • Can Be Used w/24X Or 58X Trigger Wheels
See More

ACDelco – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9746V)

Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$87.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Accel – 8Mm Super Stock Graphite Cust (Part No.4049)

8Mm Super Stock Graphite Cust

from

$77.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

Carquest Premium – Engine Crankshaft Position Sensor Connector (Part No.PTA1136)

Engine Crankshaft Position Sensor Connector

from

$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Switch Connector (Part No.PTA1273)

Ignition Switch Connector

from

$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Cornering Light Socket (Part No.PT189)

Cornering Light Socket

from

$23.29
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
See More

Carquest Premium – Ignition Switch Connector (Part No.PTA2515)

Ignition Switch Connector

from

$38.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Switch Connector (Part No.PTA1354)

Ignition Switch Connector

from

$31.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

MSD Ignition – Coils; Street Fire; GM L-Series Truck 99-07; 8-Pack (Part No.55098)

Coils; Street Fire; GM L-Series Truck 99-07; 8-Pack

from

$471.99
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.

Product Features:
  • Increased Spark Energy Over The Entire RPM Range Of The Engine
  • Coils Bolt In Place Of The Factory Units
  • Accepts OEM Connections For A Simpler Installation
See More

MSD Ignition – Blaster LS Coils for 05-13 GM LS2/3/4/7/9 Engines (8-Pack) (Part No.82658)

Blaster LS Coils for 05-13 GM LS2/3/4/7/9 Engines (8-Pack)

from

$549.99
Looking to replace your worn out LS coils with a more efficient upgrade? The new MSD Blaster LS Coil line is ideal for your modern GM muscle car or truck. The coils are designed as a bolt-in replacement yet have been thoroughly tested and detailed by our experienced engineering team. The improved efficiency of these Blaster Coils will give your LS the ignition boost you’re looking for.

Product Features:
  • Replacement Coil
  • Full One Year Warranty
See More

MSD Ignition – Coil; Street Fire; GM L-Series Truck 99-09; 8-Pack (Part No.55108)

Coil; Street Fire; GM L-Series Truck 99-09; 8-Pack

from

$409.99
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.

Product Features:
  • Increased Spark Energy Over The Entire RPM Range Of The Engine
  • Coils Bolt In Place Of The Factory Units
  • Accepts OEM Connections For A Simpler Installation
See More

Accel – Coil:GM Ls2 Ls3 Ls7 8-Pack-Black (Part No.140043K-8)

Coil:GM Ls2 Ls3 Ls7 8-Pack-Black

from

$628.99
Now you can have ACCEL late model Supercoils in additional colors

Product Features:
  • These coils feature advanced bobbin technology.
  • Highly specialized silicone magnetic steel cores with optimized windings
  • Specialized high temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment.
  • These are a direct performance bolt on upgrade.
  • The ACCEL bodies are molded in a high dielectric strength material.
See More

2007 Chevrolet Monte Carlo Ignition and Tune-Up Products

You count on your 2007 Chevrolet Monte Carlo to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 89 Ignition and Tune-Up Products ranging in price from $2.05 to $628.99, you’re sure to find everything you need for your 2007 Chevrolet Monte Carlo.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 16 different brands like ACDelco, Autolite, and NGK. 2007 Chevrolet Monte Carlo Ignition and Tune-Up Products start as low as $2.05!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 3,049 extensive product reviews on 2007 Chevrolet Monte Carlo Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration with 4.7 stars and Spark Plug Wire Set with 4.5 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2007 Chevrolet Monte Carlo below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 2007 Chevrolet Monte Carlo

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2007 Chevrolet Monte Carlo running right for years to come. In our inventory you’ll find brands like ACDelco, Autolite, NGK, and even more.

Popular Motorcraft Ignition and Tune-Up Products

You’ll find popular Motorcraft brand products across Spark Plugs. All are waiting to get your 2007 Chevrolet Monte Carlo back on the road. Some of the top-rated Motorcraft products in these categories are:
Spark Plug (AGSF52C)
from $3.29
(1)
Spark Plug (AGSF52C)
Spark Plugs

FAQs for 2007 Chevrolet Monte Carlo Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2007 Chevrolet Monte Carlo?

Out of 89 Ignition and Tune-Up Products for the 2007 Chevrolet Monte Carlo, the most popular in our inventory are:
Iridium Spark Plug: Original Equipment Replacement
from $11.99
This product is not rated
Iridium Spark Plug: Original Equipment Replacement
Spark Plugs
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
from $9.99
This product is not rated
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs

What are the top-rated 2007 Chevrolet Monte Carlo Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 2007 Chevrolet Monte Carlo based on customer reviews/ratings are:
Spark Plug Wire Set
from $83.99
(98)
Spark Plug Wire Set
“Good buy”