2007 Chevrolet Impala Vehicle Hoods
More 2007 Chevrolet Impala Vehicle Hoods
Find your specific 2007 Chevrolet Impala original or aftermarket Vehicle Hoods below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2007 Chevrolet Impala Vehicle Hoods
StrongArm – Trunk Lift Support: 12.28" Ext Length, 4.0" Travel, 82 Lbs of Force, 1 Pk (Part No.E6672)
from
$47.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
StrongArm – Hood Lift Support: 21.12" Ext Length, 7.25" Travel, 112 Lbs of Force, 1 Pk (Part No.C4582)
from
$14.79
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
- Non-Stick Back-Up Ring
- Hardened Nitride Plated Steel Shaft
- Engineered In USA To OE Quality Standards For Performance And Durability
- IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
- Easy To Install In Just Minutes. No Special Tools Required.
- Exact Fit Original Equipment Design Guarantees Correct Fit And Function
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
StrongArm – Trunk Lift Support: 9.82" Ext Length, 3.46" Travel, 191 Lbs of Force, 1 Pk (Part No.F4002)
from
$16.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Hood Lift Support: 21.74" Ext Length, 6.15" Travel, 99 Lbs of Force, 1 Pk (Part No.C4295)
from
$21.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
ACDelco – Professional Trunk Lift Support (Part No.O2064597581ACD)
from
$38.36
ACDelco Professional Lift Supports are the ideal replacements for your worn out lift support struts. The pressurized, gas charged cylinders feature chromed rods and superior seals for a lasting, quality lift support replacement. Each lift support is custom engineered and manufactured to top industry standards with self-cleaning piston technology and a patented multi-lobe sealing system. ACDelco Professional Lift Supports are easy to install with simple hand tools in just minutes.
Product Features:
See More
Product Features:
- High quality seals keep lift support fluids and gases contained within the strut components, resulting in extended product life
- Chromed rod increases rust and corrosion resistance for a higher quality, longer lasting, lift support
- Rubber O-ring piston seal for controlled lift
- Heavy gauge steel pressure tube provides long life
- Polytetrafluroethylene (PTFE) backup ring gives enhanced performance
StrongArm – Hood Lift Support: 28.25" Ext Length, 11.25" Travel, 58 Lbs of Force, 1 Pk (Part No.B6738)
from
$24.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
StrongArm – Trunk Lift Support: 11.06" Ext Length, 3.1" Travel, 133 Lbs of Force, 1 Pk (Part No.E4119)
from
$19.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
KAI – Hood Panel (Part No.GM1230342V)
from
$504.99
New Economy Replacement Hood Panel
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GM1236153)
from
$18.99
New Standard Replacement Passenger Side Lower Hood Hinge, Bodyside
Product Features:
See More
Product Features:
- Bodyside, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GMK403221069R)
from
$84.99
New Goodmark Passenger Side Hood Hinge Assembly
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GMK403221069L)
from
$84.99
New Goodmark Driver Side Hood Hinge Assembly
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GMK402021067AR)
from
$254.99
New Goodmark Passenger Side Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GMK401221068R)
from
$84.99
New Goodmark Passenger Side Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GMK402021067L)
from
$69.99
New Goodmark Driver Side Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GM1236150)
from
$45.99
New Standard Replacement Driver Side Upper Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GM1236151)
from
$45.99
New Standard Replacement Passenger Side Upper Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GMK401221068L)
from
$84.99
New Goodmark Driver Side Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GMK401021063R)
from
$67.99
New Goodmark Passenger Side Hood Hinge Assembly
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Hood Release Cable Assembly (Part No.912-032)
from
$28.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this hood release cable is made to match the original cable on specific vehicles
- Durable construction -manufactured within strict tolerances for reliable longevity
- Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Dorman – Hood Release Cable Assembly (Part No.912-031)
from
$46.49
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this hood release cable is made to match the original cable on specific vehicles
- Durable construction -manufactured within strict tolerances for reliable longevity
- Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Popular 2007 Chevrolet Impala Vehicle Hoods Categories
2007 Chevrolet Impala Vehicle Hoods
Maybe you’re in the middle of a full rebuild of that 2007 Chevrolet Impala. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 10 different Vehicle Hoods in our inventory ranging from $14.79 to $504.99. That means you can find the exact parts or products you need to keep that 2007 Chevrolet Impala running smoothly.
Vehicle Hoods are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2007 Chevrolet Impala. StrongArm, Dorman, and Atlas Lift are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Vehicle Hoods for your 2007 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Vehicle Hoods to keep your 2007 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Vehicle Hoods Brands To Make Your 2007 Chevrolet Impala Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2007 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.
Popular StrongArm Vehicle Hoods
We carry StrongArm parts in our stock across Lift Supports categories, plus more. For a 2007 Chevrolet Impala, our most popular StrongArm Vehicle Hoods include:
from
$15.49
(2)
Trunk Lift Support: 12.55" Ext Length, 4.0" Travel, 74 Lbs of Force, 1 Pk
Lift Supports
from
$32.49
(1)
Trunk Lift Support: 12.31" Ext Length, 4.0" Travel, 90 Lbs of Force, 1 Pk
Lift Supports
from
$14.79
(6)
Hood Lift Support: 21.12" Ext Length, 7.25" Travel, 112 Lbs of Force, 1 Pk
Lift Supports
FAQs for 2007 Chevrolet Impala Vehicle Hoods
What are the most purchased Vehicle Hoods for the 2007 Chevrolet Impala?
Out of 10 Vehicle Hoods for the 2007 Chevrolet Impala, the most popular in our inventory are:
